Used processing in Lucerne, Switzerland

SCHULER PDR 250-500 Ref No: 43587

• Manufacturer: Schuler
• Model: PDR 250-500

Object: 43587 | Last overhaul: 2002 | Drive system: eccentric / crank | Frame design: C-frame, single sided | Opening in table: yes | Total force (nominal): 250 to | Table surface (left-right): 800 mm | Table ...

1980 BETZ EZL 300 Ref No: 40715

• Manufacturer: BETZ

approved for single stroke Safety valve make Herion Pneumatic clutch make Desch Motor grease - central lubrication ram weight - compensation cylinder Motorized height adjustment T-slots in the ram Freestanding co...

2016 SCHMIDT EP 343 Ref No: 52947

• Manufacturer: Schmidt

Object: 52947 | Controls: SCHMIDT | Total force (nominal): 0.25 to | Table surface (left-right): 180 mm | Table surface (front-back): 150 mm | Slide force: 0.25 to | Stroke: 100 mm | Mains voltage: 400 V |...

1998 HYDRAP HPDK 100 Ref No: 55217

• Manufacturer: HYDRAP

machine in top condition Object: 55217 | Drive system: hydraulic | Openings in uprights: yes | Table cushion: yes | Total force (nominal): 100 to | Table surface (left-right): 700 mm | Table surface (front-back...

GAMEI 300 T Ref No: 43738

• Manufacturer: GAMEI

Object: 43738 | Last overhaul: 2000 | Total force (nominal): 300 to | Table surface (left-right): 475 mm | Table surface (front-back): 410 mm | Height above floor level: 640 mm | Shut height (stroke down, ad...

1980 HILU SSP 140W Ref No: 49232

• Manufacturer: HILU

The machine is being sold by us on behalf of a customer. Unfortunately, a video is not available. The machine has been with the seller for over 15 years and has not been in operation since then. An inspection un...

1990 HYDRAP HKP 12 Ref No: 45747

• Manufacturer: HYDRAP

Hour counter: 30'181 h last safety check: 27.07.2023, overrun time 38 ms, overrun distance 60 mm

1990 LAUFFER EPT 100 Ref No: 49540

• Manufacturer: LAUFFER

Equipment: - Cutting impact dampening - Hydraulic die cushion and ejector - CNC - gripper feed (200x900x1700) - Soprem belt system (optional) see article no. 3-49541

2003 SCHULER GRÄBENER GMO 2-315-2000-160 Ref No: 44872

• Manufacturer: Schuler

Knucke Joint press for slow movement when approaching BDC Coil Reel KOHLER 4000.1 Straightener KOHLER KRM 50.400/9 KOHLER Loop control BÜ5 Roll feed KOHLER WVE 120/400 HIESSL belt lubrication (wide spray) UNIDOR ...

1999 LOIRE SAFE EDIM 350-150/16-14/14-12 Ref No: 41754

• Manufacturer: Loire Safe

Object: 41754 | Controls: SIEMENS S5 95U | Drive system: hydraulic | Openings in uprights: yes | Total force (nominal): 350 to | Table surface (left-right): 1600 mm | Table surface (front-back): 1400 mm | Str...

2003 LOIRE SAFE EDIMR 800 Ref No: 46229

• Manufacturer: Loire Safe

Complete hot forming line (sheet metal application)consisting of: * Hydraulic press LOIRE SAFE 800 to. * Schwartz GA1534 furnace system: - max. lining width: 1.500 mm - Inner furnace length: 20.000 mm - Inner hei...

2001 LASCO TZP 1000 SO Ref No: 46228

• Manufacturer: Lasco

Complete hot forming line (sheet metal applications) consisting of: * 1000 to. hydraulic press LASCO * Schwartz furnace system: - max. lining width: 1700 mm - Furnace length: 27060 mm * Strothmann feeder * ABB lo...

2020 Brevetti Cea BSA02

• Manufacturer: Brevetti - Motta
• Model: BSA02

2003 ROSS 80R4 Ref No: 55280

• Manufacturer: Ross

Object: 55280 | Drive system: eccentric / crank | Total force (nominal): 80 to | Table surface (left-right): 570 mm | Table surface (front-back): 390 mm | Thickness of bolster plate: 70 mm | Opening in bed (...

1997 SANGIACOMO T 15 CE Ref No: 55256

• Manufacturer: San Giacomo
• Model: T 15 CE

Object: 55256 | Drive system: eccentric / crank | Total force (nominal): 15 to | Table surface (left-right): 360 mm | Table surface (front-back): 260 mm | Stroke rate (max.): 165 /min | Slide adjustment: 40 ...