Used processing in Canada

Delta Design 1935860-501 Rev. E PXI-TC Interface Board

• Manufacturer: Delta

“This item was removed from working equipment, inspected, cleaned and found in very good condition.”

2016 Graco "ProMix 2KE" Electronic Proportioner

• Manufacturer: Graco

Graco "ProMix 2KE" Electronic Proportioner Includes all Spray pumps & Regulators

2019 Hero " A201" Automatic Colorant Dispenser

• Manufacturer: Hero
• Phase type: Single-phase

Hero " A201" Automatic Colorant Dispenser Phase: 1 PHASE | Voltage: Other | Load out period: Feb 23-27 2026 | Estimated dimensions: See Photo | Estimated weight: 250 lbs | Load fee: 20.00

Lux Mill CY9GH230

• Manufacturer: Lux-Mill

Capacity: 9 X 42 Table

2020 FLOW M500 4080 XD

• Manufacturer: Flow
• Phase type: Three-phase

PDF Mach 500 Brochure Mach 500 Waterjet Equipped With HyperJet Intensifier, 100HP, 94,000 psi max. 5-Axis XD Cutting Head Paser CF900 Continuous Abrasive Delivery Hopper, 100-240 VAC / 24 VDC, 1-ph

ATMOS-TECH AS889-ST/PLC/NF/KD/SP

• Manufacturer: Atmos

2005 MULTICAM 3000 Series

• Manufacturer: MultiCam
• Model: 3000 SERIES
• Phase type: Three-phase

Overview: Mild steel capacity: A high-definition model can cut up to 1.56" - 2.375" thick mild steel, depending on the plasma power source

MODERN V-412-6

• Manufacturer: Modern

Overview: Length: 48 " | Bending length: 48"/1220mm | Bending angle: 0-135 degree | Mild steel: 12GA/2.5mm | Stainless steel: 16GA/1.6mm | Beam horizontal adjustment: 1"/25mm | Min reverse bend: 1/2"/12mm

Used Thiele 2 Lane Stainless Steel Pick and Place – Reciprocating Placer, Model S-20-8M

• Manufacturer: Thiele

1 Used Thiele 2 Lane Stainless Steel Pick and Place – Reciprocating Placer, Model S-20-8M. Machine is designed to pick up different types and shaped products, (cards, clamshells, trays, etc.) from adjustable maga...

Used Quadro Comil, Model 194

• Manufacturer: Quadro
• Model: 194

-manufacturer: Quadro (2009) -model: 194 -serial no. 194-1645 -stainless steel washdown motor: 5 hp, 230/460 volt, 1750 rpm -with screen (2C094G032723389* - 2388) -inlet: 7'' -discharge: 10'' -discharge fr...

Stokkermill Italy Eddy Current

Description : Non-ferrous eddy current separators are a system for recovering non-ferrous metals in a waste recovery line that produces materials from 1 e 300 mm. Eddy current separators are used in a wide range ...

Stokkermill Italy VT

Description : Densimetric shaker separation The VT range from Stokkermill is designed for separation of materials with different specific weights, and is equipped with systems for adjustment of vibration frequenc...

NORGREN C/980/AF/11.625/Z/B/SP

• Manufacturer: Norgren

Aluminum Diameter - 8" Stroke - 11.625 Operating Pressure - 145 psi

PARKER TB2AU14A

• Manufacturer: Parker

Bore: 10" | Stroke: 14.5" | Psi: 250