Used processing in Hasle, Switzerland

Grinding wheel moulds

The detail can be found in the attached appraisal Location : Prata Camportaccio (SO) To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to...

2016 MAZAK VTC800/30SLR Ref No: 53585

• Manufacturer: Mazak
• Model: VTC 800

further options • Air blowing out of the workpiece • High pressure 15 bar through spindle • Mazak Monitoring B (Renishaw RMP60) • Tool length measurement x2 Table centre partition • NC rotary table, 360,000 posit...

2017 ITG 2-SPUR Ref No: 44272

• Manufacturer: ITG

System consists of: + ITG ITPA 100k150 vertical induction hardening system, YoM 2017 150 kW, 100 kHz + BACHMANN automation cell, YoM 2017 + 2x ABB IRB 4600 handling robots, YoM 2017 load capacity 60 kg, additiona...

1991 DANOBAT RTM 1600 - CNC Ref No: 54094

• Manufacturer: Danobat
• Grinding length: 1,600 millimeter

borehole: diameter: 203.2 mm Object: 54094 | Controls: SIEMENS 840 D | Grinding length: 1600 mm | Grinding width: 900 mm | Workpiece height (max) with largest wheel: 600 mm | Number of processing axes (exc...

2003 DMG DMU 50 M Ref No: 53751

• Manufacturer: DMG Mori
• Model: DMU 50

26,000 operating hours, 3,812 working hours Object: 53751 | Controls: HEIDENHAIN | Number of processing axes (excl parallel axes): 3 | X-axis travel: 500 mm | Y-axis travel: 400 mm | Z-axis travel: 400 mm | Ta...

2003 DMG DMU 50 Ref No: 53750

• Manufacturer: DMG Mori
• Model: DMU 50

4726 spindle hours, 10,000 operating hours Object: 53750 | Controls: HEIDENHAIN | Number of processing axes (excl parallel axes): 3 | X-axis travel: 500 mm | Y-axis travel: 400 mm | Z-axis travel: 400 mm | Tab...

1991 FEHLMANN PICOMAX 51 CNC Ref No: 55013

• Manufacturer: Fehlmann
• Model: Picomax 51

Machine in excellent condition. Tool holder equipment (1/2 shown in the picture) includes rotary table

2022 CHIRON DZ 08 W P+ Ref No: 51182

• Manufacturer: Chiron

Operating hours: Spindle 1: 4050 h, Spindle 2: 11,114 h Internal cooling 70 bar Fanuc Automation Robot M-10IA Integrated workpiece changing device Knoll coolant tank Knol KF 400/900

Gannomat Protec I CNC Machining Center

• Manufacturer: Gannomat
• Model: PROTEC

We hereby offer this used Gannomat Protec CNC machining center from 2019, located in Switzerland. It features an expansive working area of 1000 x 5600 x 60 mm, providing ample space for large workpieces. The mach...

2007 OKK VP 400 Ref No: 50088

• Manufacturer: OKK
• Model: VP400

Operating hours: 35`000h Inklusieve: Vices see picture

2005 CHIRON MILL 2000 HIGH SPEED Ref No: 50115

• Manufacturer: Chiron
• Model: MILL 2000

including chip conveyor Duty cycle 53'700h Spindle hours 26'400h Tool holder 5 pieces The following auxilliaries can be bought seperately at additional cost: Röhm double clamps Torsion springs for tool holders ...

2001 MORI SEIKI SV 503 Ref No: 54136

• Manufacturer: Mori Seiki
• Model: SV-503

Object: 54136 | Controls: MORI SEIKI MSX 501 III | Number of processing axes (excl parallel axes): 3 | X-axis travel: 800 mm | Y-axis travel: 510 mm | Z-axis travel: 460 mm | Table surface (left-right): 1320 ...

2017 SORALUCE FLP 6000 Ref No: 50854

• Manufacturer: Soraluce

tool magazine with 60 slots Coolant system via shower ring and IKZ up to 70 bar Coolant type Coolant lubricant / air / air with MMS Electronic handwheel with cable transmission Accessories: Chip conveyor Cooling...