Used processing in Flanders, Belgium

Hot air oven “Meyn”, Type HAF 600/8000

• Manufacturer: Meyn

suitable for thermic oil heating adjustable temperature adjustable speed belt width 600 mm canopy with electric hoists suitable for steam injection (to heat up and to improve product yields) 400V-50 Hz-42A

“Seamac” steam tunnel, Type Varicon 4-800

cooking length 4.000 mm belt width 800 mm all stainless steel suitable for steam heating temperature measurement 4 zones steam injection per zone (4 zones) air circulation per zone from bottom to top through the ...

“Kersting” After Heating Tunnel

• Manufacturer: Kersting

net cooking length ± 12.500 mm belt width ± 700 mm all stainless steel with 2 hoists 16 fans infeed conveyor outfeed conveyor washing system (conveyor) suitable for steam heating adjustable speed 120 kW mesh wire...

Linear oven “Formcook”, Type HSC 1075E

• Manufacturer: Formcook

all stainless steel electrically heated, max. 280°C adjustable speed 11 inspection/cleaning hatches belt width ± 1.000 mm net length ± 7.500 mm with belt wash system Modular construction system Conveyor belt (ope...

Linear oven 3 tiers “Provisur TST”, Type COO1350x6000

• Manufacturer: Provisur

all stainless steel completely isolated infeed conveyor outfeed conveyor belt width ± 1.350 mm 3 tiers from 6.000 mm adjustable speed suitable for thermal oil heating

“FlowCook” Hot air oven “GEA-CFS”, Type FLC 14000/600

• Manufacturer: CFS/Koppens
• Model: FlowCook FLC14000/600

all stainless steel suitable for thermal oil heating belt length ± 13.000 mm belt width ± 600 mm outfeed conveyor belt washing system electric hoists for the lid

CookStar “GEA-CFS” Spiral oven, Type HLS 600/10/100-102

• Manufacturer: CFS/Koppens

net belt width ± 600 mm total electrical power 33 kW 2x5 tiers automatic elevator with belt wash system suitable for CIP-cleaning suitable for steam injection (heating and product yield): 4-8 bar, connection: NW ...

Cooking vessel 3.000L “Conrad Engelke”

completely stainless steel Suitable for direct steam injection (4 points at the bottom of the conical base) Operating temperature 125°C Operating pressure 2.5 bar Insulated (bottom + walls) Manhole DN500 Internal...

Vacuum Cooking-Stirring Tank “LKM Norderstedt”

Conical bottom Pressure -1/3Bar Operating temp. 200°C Stainless steel 316L Motor SEW 0,9 kW-31 rpm/1,8 kW-64 rpm 400V Suitable for CIP Suitable for direct steam injection Suitable for vacuum With agitator Switch ...

2012 Eurowater STFA 20

• Manufacturer: Eurowater

Eurowater STFA Industrial Water Treatment System With 2 Eurowater STFA Tanks Brutwater Tank, Grunfoss Pumps, Assorted Valves and Salt Bin(B2)

Grundfos MGE160MH

• Manufacturer: Grundfos
• Model: MGE160

2x Grundfos CR 15-3 Industrial Vertical Pumps 3.0 kW Stainless Steel 15 m/h Flow Rate Operating Temperature Range -20C to +120C

Loos International Gas Boiler

• Manufacturer: Loos

Loos International Gas Boiler Max 2000 kW Output 10 tons Burner replaced 2008 Weishaupt burner model G70/2-A

Loos International Gas and Diesel Boiler

• Manufacturer: Loos

Loos International Gas and Diesel Boiler Duel fuel gas and diesel capability 10 tons Burner replaced 2008 Weishaupt burner model G70/2-A