Used processing in Flanders, Belgium

STEEN ST700V10 Automatic (Deep) Skinner - Short

• Manufacturer: Steen

Automatic (Deep) Skinner - Short The automatic short fish (deep) skinner ST700V has next to the advantages of the ST600V(10) some extra unique properties. One example is that it is easy and fast to take apart wit...

STEEN ST700V Automatic (Deep) Skinner - Long

• Manufacturer: Steen

Automatic (Deep) Skinner - Long The automatic fish (deep) skinner ST700V has next to the advantages of the ST600V(10) some extra unique properties. One example is that it is easy and fast to take apart without th...

STEEN ST600V Automatic Skinner – Long

• Manufacturer: Steen

Automatic Skinner – Long The ST600V automatic fish skinner is designed to deliver high yields and can handle very fine, delicate or rough work. The machine is successful in its goal because it is fitted with a sm...

STEEN ST540 Fin-Tail & Head Cutter

• Manufacturer: Steen

Fin-Tail & Head Cutter This fin tail head cutter relieves the time consuming and frustrating handling of cutting by hand. The ST540 improves on cutting speed, cutting accuracy and takes away the cramps in the han...

STEEN ST521 SAM Semi Automatic Descaler

• Manufacturer: Steen

Semi Automatic Descaler The ST521 SAM is an automatic fish descaling machine, re-engineered from the vegetable industry, descales +/-20 kg of whole fish (including ice) at a time . The rotating motion of the bott...

STEEN ST600VR Automatic Skinner & De-Friller

• Manufacturer: Steen

Automatic Skinner & De-Friller The ST600VR skinner fin fringes remover is the most successful high yield skinning and frill removing machine on the market. Next to plaice, this machine can also be set to process ...

STEEN ST521 Descaler

• Manufacturer: Steen

Descaler Working with the manual fish descaling machine does not only reduce the labor load of your workers, but it also assures the job is done consistent and with a high-speed. The simplicity in the design also...

6-zak Stand-alone dust extractor

The number of sacks: 6 diameter 500 mm Motor: 4 kW Suction mouth: 250 mm. 24 filter sleeves Capacity: 4500 m³/h. Machine number: Year of construction:

1973 JOSTING EFS 3200 Veneer pack guillotine

• Manufacturer: josting

Cutting length: 3200 mm Max pack height: 80 mm. Hydraulic pressure beam 2-hand operation Motorised back fence With light beam

POLYBOIS RAV 32 Feeder

• Manufacturer: polybois

Machine number: Tension: 400V 50Hz 3Ph

1992 HACKEMACK KTR 2040 Drying equipment for stain and lacquer

• Manufacturer: Hackemack

UV dryer 1 lamp Cross bar transport Working width: 1.3 m. Number of units: 1 Total power: 12.2 kW UV dryer 5 lamps Cross bar transport Working width: 1.3 m. Number of units: 5 Total power: 62.4 kW shared electric...

1991 JOSTING EFS 2800 L Veneer pack guillotine

• Manufacturer: josting

Cutting length: 2800 mm Max pack height: 80 mm. Hydraulic pressure beam 2-hand operation Light beam security Motorised back fence

2004 CORINO APRICORDA

• Manufacturer: Corino
• Model: APRICORDA

Detwisting / rope opener CORINO type APRICORDA year of construction 2004, serial number 516/03, maximum length guiding rolls 2400mm.

1995 FISCHER+RÜCKLE FLA Glue spreader

• Manufacturer: Fischer

Automatic veneer pack edge glueing machine Veneer pack length: from 300 mm on Veneer pack width: 40 to 400 mm Veneer pack thickness: 10 to 80 mm Feed speed: 30 m/min Capacity, depending on pack length, ca. 3 to 4...

1987 JOSTING ZFS 2800 Veneer pack guillotine

• Manufacturer: josting

Cutting length: 2810 mm. Veneer pack thickness: 80 mm. Cutting width: 20 to 470 mm., 1 top knife, 1 bottom knife, simultaneous cutting Hydraulische pressure beam Power installed: 9 kW Preselection of 16 different...