Used processing in British Columbia, Canada

Henderson CC131.3-50H18900 Box Sander

2005 36" 740psi Sweet Horizontal Separator

With a 24" x 8' Orban 1440 psi vertical Packager: Orban | Service type: Sweet | Pasc condition rating: C | Condition details: unit will need to be inspected and cleaned. Can provide those options if needed | Skid...

1989 36" 200psi Sweet Vertical Compressor start gas Separator 2 Phase

• Manufacturer: Sure Weld Industries

Service type: Sweet | Pasc condition rating: B | Skidded: No | Housed: No | Connection status: Connected | Vessel only: Yes | Separator type: Compressor start gas | Diameter: 36" | Diameter(unit of measure): inc...

2010 16" 1480psi Sweet Vertical Separator Phase

Packager: Flint | Service type: Sweet | Pasc condition rating: A | Condition details: New, never in service | Skidded: Yes | Housed: Yes | Connection status: Disconnected | Vessel only: No | Diameter: 16" | Diam...

Model 34 Headrig Slabber

- RH (clockwide rotation) - 24-5/8" minor diameter - Six (6) knife, bent knife pockets - c/w driven sheave (30-1/2" diameter, 5V, 10 groove) - Heavy duty slide base - 18" stroke trunnion mounted setworks cylinder...

5' Salem Reducer Twin Sharp Chain System

• Manufacturer: Sharp

- To handle logs up to 24" in diameter x 16' long - Sprocket style log turner c/w overhead holddown rolls - 3" wide Sharp Chain c/w hydraulic drive - USNR reducer module c/w step disc head and linear positioners ...

8' PES Composer

• Manufacturer: Canadian Mill Equipment

- Feeder - Tilt hoist - Let down stacker

Durand Raute Rotary Green Veneer Clipper

• Manufacturer: Durand Raute

- 120" double sided rotating knife - 11" by 110" top and bottom anvil rolls - Hydraulic drive for knife rotation - Four infeed holddown arms with belts - 25 HP hydraulic unit with PVB 20 pump - Durand Raute contr...

TimberStar Grade Stamper

• Manufacturer: Canadian Mill Equipment

- Removed May 2015 - Six (6) head mounted onto a stand - Dismantled and ready to load

RAWLINGS ROTARY HOG

- horizontal feed - Model 360 HZ - spiral rotor - 60" wide x 33" high opening - 4" x 9" screen openings - needs rebuilding - located in the Fraser Valley (close to Vancouver, British Columbia)

Flare Saw Guide Resurfacer

• Manufacturer: Canadian Mill Equipment

- Single sided - Digitally controlled - Very accurate - 575 volt

Chip Trailer Dump

• Manufacturer: Canadian Mill Equipment

- 66' long deck (could be lengthened) - c/w HPU - No receiving bin

60" CAE Carriage

• Manufacturer: CAE

- Manufactured approximately 1988 - 3 Knee c/w Sharpe linear positioners - Vee and flat wheels - Cant flippers - Overall knee width 21" (14" between the knee faces) - Two (2) accumulators - Frame is approximately...

30 Unit Truck Bins (3 only)

• Manufacturer: Canadian Mill Equipment

- Three (3) only 30 unit bins c/w hydraulically actuated bin bottoms - Support steel - Two (2) hydraulic power units - Dismantled and ready to load

COMACT DDM6 PROFILING CANTERLINE

• Manufacturer: Comact

- Built in 2006 - 4" to 10" diameter logs, 8 feet long @ up to 650FPM - Comact Wave Feeder (9' - 6" between end walls) - V flight Infeed Conveyor c/w eletric drive - V flight scan chain c/w electric drive - Quad ...