Used processing in Bern, Switzerland

1972 FEINTOOL GKP F 100/160 Ref No: 49648

• Manufacturer: FEINTOOL

Object: 49648 | Drive system: knuckle-joint | Frame design: H-frame, monoblock | Total force (nominal): 160 to | Stroke: 13 mm | Stroke rate (max.): 72 /min | Nominal force: 50 to | Lower table (left-right):...

PLATARG 611 Ref No: 40001

• Manufacturer: PLATARG

Specifications: Number of stations: 12 (11+1) Capacity per ram: 6 tons Maximum stroke: 114 mm Max. shell height: 50 mm Standard ram pitch: 82 mm Blank diameter: 80 mm Maximum speed: 80 spm Example of an overhaule...

2001 MIOS T20 FV Ref No: 55890

• Manufacturer: Mios

Object: 55890 | Drive system: eccentric / crank | Openings in uprights: yes | Number of slide actions: 1 | Table cushion: no | Quick die change system: no | Total force (nominal): 20 to | Spigot hole diameter: ...

2000 IMS 50 RE Ref No: 55279

• Manufacturer: IMS

Object: 55279 | Drive system: eccentric / crank | Total force (nominal): 50 to | Table surface (left-right): 440 mm | Table surface (front-back): 360 mm | Spigot hole diameter: 40 mm | Stroke: 90 mm | Strok...

2002 ESNA VFS/PN45 Ref No: 55264

• Manufacturer: ESNA

Object: 55264 | Drive system: eccentric / crank | Total force (nominal): 45 to | Table surface (left-right): 410 mm | Table surface (front-back): 280 mm | Opening in bed (diameter): 40 mm | Stroke rate (max....

1997 ROSS 63R4 Ref No: 55175

• Manufacturer: Ross

Object: 55175 | Controls: DANFOS | Drive system: eccentric / crank | Frame design: C-frame, single sided, inclinable | Openings in uprights: yes | Number of slide actions: 1 | Table cushion: no | Opening in tabl...

2002 MIOS T20 FV Ref No: 53991

• Manufacturer: Mios

Object: 53991 | Spigot hole diameter: 30 mm | Stroke rate (max.): 155 /min | Stroke min.: 5 mm | Stroke max.: 60 mm | Shut height (stroke down, adjustment up), bdc: 280 mm | Throat (c-frame): 180 mm | Tota...

1967 WEINGARTEN ARS 100 Ref No: 47690

• Manufacturer: Weingarten
• Model: ARS 100

for safe tools only Object: 47690 | Drive system: eccentric / crank | Frame design: C-frame, single sided | Total force (nominal): 100 to | Slide force: 100 to | Stroke rate (max.): 72 /min | Slide adjustment:...

1992 MIOS 100 Ref No: 47214

• Manufacturer: Mios

Object: 47214 | Drive system: eccentric / crank | Openings in uprights: yes | Number of slide actions: 1 | Total force (nominal): 100 to | Table surface (left-right): 540 mm | Table surface (front-back): 350 ...

SCHULER PDR 250-500 Ref No: 43587

• Manufacturer: Schuler
• Model: PDR 250-500

Object: 43587 | Last overhaul: 2002 | Drive system: eccentric / crank | Frame design: C-frame, single sided | Opening in table: yes | Total force (nominal): 250 to | Table surface (left-right): 800 mm | Table ...

1980 BETZ EZL 300 Ref No: 40715

• Manufacturer: BETZ

approved for single stroke Safety valve make Herion Pneumatic clutch make Desch Motor grease - central lubrication ram weight - compensation cylinder Motorized height adjustment T-slots in the ram Freestanding co...

HOT MACRO-PERFORATOR 3 to 16 mm holes

For BOPP PP PVC thermoplastics in general. Can be fit on cutting machines, rewinders, Flexoprinting machines or other plastic film treatment machines. Max perforation width 1.500 mm. Roll width 1.700 mm. (availab...

MACCHI FILM DIE diam.180 mm.

• Manufacturer: Macchi

For blown film die head 180 mm. inner diam. 340 mm. outer diam. Tongue and groove Height 145 mm.