Used processing in Aarau, Switzerland

Styrotec styrofoam press SBP13

• Manufacturer: Styrotec

With an innovative technology, the system compacts bulky materials in an extremely economical manner EPS (Styrofoam®) foam scraps into easy-to-handle blocks. The extreme volume reduction achieved in this way in a...

Temperature Control Unit - Huber - Unichiller 180TW-H18 - VP.046.LZ-VP.051.LZ

• Manufacturer: Huber

Control via Pilot ONE 6 Units Available Heating: 18 kW | Max. cooling: 18 kW | Max. pump: 4.7 bar at 30 L/min | Connection process: G 1 1/4" | Connection cooling water: G 3/4" | Dimensions: 760 x 920 x 1612 mm |...

Trak-Met TTP-600 I Mobile Sawmill I 2023

• Manufacturer: TRAK

We hereby offer this used Trak-Met TTP-600 mobile sawmill from 2023, located in Switzerland. Embodying mobility and power, this state-of-the-art mobile sawmill boasts a generous cutting length of 7800 mm. Equippe...

2017 SUMITOMO SHI DEMAG El-Exis SP 300/720-920

• Manufacturer: Demag

This SUMITOMO SHI DEMAG El-Exis SP 300/720-920 was manufactured in 2017. A robust electrical injection moulding machine, it features a screw diameter of 45 mm, a clamping force of 3,000 kN, and tiebar spacing of ...

2017 SUMITOMO SHI DEMAG El-Exis SP 580/1020-3000

• Manufacturer: Demag

This SUMITOMO SHI DEMAG El-Exis SP 580/1020-3000 was manufactured in 2017. A robust electrical injection moulding machine featuring a screw diameter of 70 mm, clamping force of 5,800 kN, and tiebar spacing of 1,0...

2017 SUMITOMO SHI DEMAG El-Exis SP 450/920-2500

• Manufacturer: Demag

This SUMITOMO SHI DEMAG El-Exis SP 450/920-2500 was manufactured in 2017. A robust electrical injection moulding machine, it features a screw diameter of 70 mm, a clamping force of 4,500 kN, and tiebar spacing of...

Sysmex XT-1800i

• Manufacturer: Sysmex
• Model: XT-1800I

Sysmex Hematology Analyzer XT-1800i. Fully automatic 5-part differential blood count analyzer. Compressor unit. Without PC or software. 230V, 50/60Hz, 250W. The following illustrations and descriptions refer to t...

2016 MAZAK VTC800/30SLR Ref No: 53585

• Manufacturer: Mazak
• Model: VTC 800

further options • Air blowing out of the workpiece • High pressure 15 bar through spindle • Mazak Monitoring B (Renishaw RMP60) • Tool length measurement x2 Table centre partition • NC rotary table, 360,000 posit...

Grinding wheel moulds

The detail can be found in the attached appraisal Location : Prata Camportaccio (SO) To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to...

2004 DEMAG Ergotech System 150/500-840

• Manufacturer: Demag
• Model: Ergotech

This DEMAG Ergotech System 150/500-840 was manufactured in 2004. It features a complete injection unit with a ø50mm and ø60mm bimetal screw, both highly wear-resistant. Equipped with four hydraulic core pullers, ...

2017 ITG 2-SPUR Ref No: 44272

• Manufacturer: ITG

System consists of: + ITG ITPA 100k150 vertical induction hardening system, YoM 2017 150 kW, 100 kHz + BACHMANN automation cell, YoM 2017 + 2x ABB IRB 4600 handling robots, YoM 2017 load capacity 60 kg, additiona...

1991 DANOBAT RTM 1600 - CNC Ref No: 54094

• Manufacturer: Danobat
• Grinding length: 1,600 millimeter

borehole: diameter: 203.2 mm Object: 54094 | Controls: SIEMENS 840 D | Grinding length: 1600 mm | Grinding width: 900 mm | Workpiece height (max) with largest wheel: 600 mm | Number of processing axes (exc...

2003 DMG DMU 50 M Ref No: 53751

• Manufacturer: DMG Mori
• Model: DMU 50

26,000 operating hours, 3,812 working hours Object: 53751 | Controls: HEIDENHAIN | Number of processing axes (excl parallel axes): 3 | X-axis travel: 500 mm | Y-axis travel: 400 mm | Z-axis travel: 400 mm | Ta...