Used processing in Schwyz, Switzerland

1968 FEINTOOL GKP 50/80 Ref No: 32057

• Manufacturer: FEINTOOL

Object: 32057 | Total force (nominal): 80 to | Stroke: 50 mm | Stroke rate (min.): 28 /min | Stroke rate (max.): 72 /min | Nominal force: 12 to | Lower table (left-right): 420 mm | Lower table (front-back)...

1971 FEINTOOL GKP 50/80 Ref No: 37325

• Manufacturer: FEINTOOL

Press can be inspect under power. Feeder with hydr. motor.

1994 KAISER KSTU ZA 2000-15P Ref No: 43706

• Manufacturer: Kaiser

+ Coil feed line KOHLER with straightener KRE2 18.260/19 + Feeder KAISER KWV 250 + 2-axis gripper bars transfer SANDER with adjustable pitch + table cushion rail with various cushions and fillers (separate data s...

1977 PLATARG 611 Ref No: 43685

• Manufacturer: PLATARG

A new electrical control system and a mechanical and lubrication rebuild are required. One used PLATARG model 611 transfer press, high speed type. Full follow cams. Number of stations: 12 Number of rams: 11 + 1 s...

1969 PLATARG 312 Ref No: 40583

• Manufacturer: PLATARG

This machine can have the following installed/added to it (not included) o new lubrication o new electrical installation o new protections o CE conformity Number of station 13 (12+1). Capacity on any one station ...

2007 SCHMID HSR400 Ref No: 51084

• Manufacturer: Schmid
• Model: HSR400

including coil line SARONNI with direct feed - hydraulic opening for cleaning - band guides at outlet - proportional pressure reducer for drive rollers

FEINTOOL GKP 250 Ref No: 38885

• Manufacturer: FEINTOOL

Complete refurbished fineblanking press: * disassembly into individual parts * findings of all components (crack test) * overhaul of the drive * overhaul of the guides * overhaul of the impression cylinders * ove...

Plant for packaging grated cheese

• Manufacturer: Gosto

2001 MIOS T20 FV Ref No: 55890

• Manufacturer: Mios

Object: 55890 | Drive system: eccentric / crank | Openings in uprights: yes | Number of slide actions: 1 | Table cushion: no | Quick die change system: no | Total force (nominal): 20 to | Spigot hole diameter: ...

2000 IMS 50 RE Ref No: 55279

• Manufacturer: IMS

Object: 55279 | Drive system: eccentric / crank | Total force (nominal): 50 to | Table surface (left-right): 440 mm | Table surface (front-back): 360 mm | Spigot hole diameter: 40 mm | Stroke: 90 mm | Strok...

2002 ESNA VFS/PN45 Ref No: 55264

• Manufacturer: ESNA

Object: 55264 | Drive system: eccentric / crank | Total force (nominal): 45 to | Table surface (left-right): 410 mm | Table surface (front-back): 280 mm | Opening in bed (diameter): 40 mm | Stroke rate (max....

1997 ROSS 63R4 Ref No: 55175

• Manufacturer: Ross

Object: 55175 | Controls: DANFOS | Drive system: eccentric / crank | Frame design: C-frame, single sided, inclinable | Openings in uprights: yes | Number of slide actions: 1 | Table cushion: no | Opening in tabl...

2002 MIOS T20 FV Ref No: 53991

• Manufacturer: Mios

Object: 53991 | Spigot hole diameter: 30 mm | Stroke rate (max.): 155 /min | Stroke min.: 5 mm | Stroke max.: 60 mm | Shut height (stroke down, adjustment up), bdc: 280 mm | Throat (c-frame): 180 mm | Tota...

2000 PRESSIX 100 CNR 4 Ref No: 51223

• Manufacturer: Pressix

Located in Barcelona - Spain 2 identical units available

1995 PULLMAX P5

• Manufacturer: Pullmax
• Model: P5

PUNCHING AND SHAPED CUTTING PULLMAX P5 - Operates automatically with electric motor