Used process engineering in Japan

Ube Industries Gas Processing Facility
- Manufacturer: UBE Industries
Single type Device name: Gas processing equipment | Production no.: U-112214
$1,946 USD
Tokyo, Japan
Tokyo Engineering TFAP7-14
- Manufacturer: Tokyo Engineering
Quantity saved: One
Hiroshima, Japan
Red Bam Engineering VSP - 25P
- Manufacturer: Akitake Engineering
Powder Conveying System, Sanitary Specifications (Conveying Piping 2S) Suction volume: 2500L/hr Air drive
Hiroshima, Japan
2017 Chikara Engineering HANG48×800
- Manufacturer: Tikara Engineering
Fully automatic low-discharge type Maximum capacity 480L Rotation speed 1080rpm Centrifugal effect 796G Scraping device hydraulically driven With control panel
Hiroshima, Japan
2011 Izumi Environmental Engineering Vertical
- Manufacturer: Izumi
Tube: 25.4φ (2t) x 3000L x 165 tubes (SUS304) Body plate: 500φ (SGP-E)
Hiroshima, Japan
1997 Mitsubishi Chemical Engineering 58L
- Manufacturer: Mitsubishi
Capacity:0.058m3 Class 1 pressure vessel (no data) Maximum working pressure: 30 kg/cm2 Maximum working temperature: 230°C Operation panel available Remarks Operation panel: Newly made is recommended. Others: Curr...
Hiroshima, Japan
2009 Nippori Engineering DD-40NX6-0
- Manufacturer: Nippon Polymer Engineering Co.
Treatment air volume 25m3/min
Hiroshima, Japan
Tomoe Engineering P-3000
- Manufacturer: Tomoe kogyo
No spare ball gearbox for decanter Material: SUS | Quantity saved: Two
Hiroshima, Japan
Tomoe Engineering P-3000
- Manufacturer: Tomoe kogyo
22kw 4000rpm/3200G Processing capacity: 3-5m3/H Power: 22kw | Material: SUS | Quantity saved: One
Hiroshima, Japan
Tikara Engineering 60 × 25 1/2 type
- Manufacturer: Tikara Engineering
Main unit, scraping unit, hydraulic unit Capacity: 610L Rotation speed: 840(600G)~970RPM(800G) During scraping: 11RPM Without control panel and filter cloth. Please contact us for availability. We can provide you...
Hiroshima, Japan
1989 [Chiyoda Engineering] Electric furnace No model
- Manufacturer: Chiyoda Engineering
Hot air circulation / cylinder rotation type With blower
Hiroshima, Japan
1992 Belltong Engineering Model KP-110-1000
- Manufacturer: Belltong Engineering
RPF Production Equipment Waste Plastic Volume Reducing Machine (PLAPACK) Parts replacement (sequencer) is required for the operation panel. With drawing, specification and instruction manual
Kure, Japan
350m2 gas cooler
Kure, Japan
2007 Gas band dryer
- Manufacturer: Made by Western heat machine
Dimensions 1.110mmW x 7.750mmL x 2.660mmH (750mm width of mesh belt) Output 8.6KW 200V Combustion amount 103.600kcal / h Operating temperature 230 ℃ Conveyor speed: 0-6m / min Mesh: 15mm May 2007 There are drawin...
Kure, Japan
Process Line
- Manufacturer: SAMIIL MACHINERY CO., LTD.
Engineering: MHI SES
Japan