Used power sensor in Neuchâtel, Switzerland

CNC SHARPENING MACHINE SCHNEEBERGER TYPE GEMINI DMR

• Manufacturer: Schneeberger

Fanuc Oi-MB – spindle HSK50 – 50-10'000 min-1 Partially rebuilt and in good working condition 2. Check all sensors and sensor cables. – 18 sensor cables have been replaced. – All sensor cables that were too long ...

Krohne Smartpat PH 8320

Function: The current loop-powered, 2-wire digital pH sensors for the water and wastewater waste water industry were used to determine the nitrification of urine. Other possible applications: Monitoring of biolog...

DECKEL MAHO DMC 65V CNC Universal Machining Centers

• Manufacturer: Deckel / Maho
• Model: DMC 65 V

Deckel Maho DMC 65V - Vertical CNC Machining Center (used) For sale is a vertical CNC milling machine of the type DMC 65V from the manufacturer Deckel Maho, equipped with a Heidenhain control system. The machine ...

1998 CYLINDRICAL GRINDING MACHINE STUDER S40

• Manufacturer: Studer
• Model: S40

USED CYLINDRICAL GRINDING MACHINE STUDER S40 4 Axis LINEAR AXES WHEEL HEADSTOCK Wheel motor power 7.5 kW WORKPIECE HEADSTOCK SUB HEADSTOCK Equipped with : 1 CN FANUC 16-T 1 Electronic reach handle Axis B for ind...

2007 Collomat E86 Labeling machine

• Manufacturer: Collomat

Folding box labeling machine consists of an Etiprint inline dispenser, controlled by the Collamat Monitor. The labeller is mounted on a stable frame and incl. a pneumatic applicator with a vacuum plate that autom...

ITALIAN 1.000 mm working width - for sheeters, extruders, bag makers, prints,..

• Manufacturer: ITALIAN

CORONA TREATMENT UNIT (this machine is available in other sizes/specs, bespoke to project) Suitable for bag makers, extrusion lines, printing units, sheeters, etc. Web width 1.160 mm working width 1.000 mm. S...

2005 EMAG VSC 500

• Manufacturer: Emag
• Model: VSC 500

- CN SIEMENS 840D - Touch part sensor Marposs - Lubricating tank - Cooling tank - Chip conveyor KNOLL 2 mounts CNC vertical lathe with axis C, rotary tools, turret and parts palletization. ...

Huber Unistat 815 with "Pilot one" controller

• Manufacturer: Huber

Cooling/heating circulation thermostat with air-cooled chiller and visual level indicator. Stainless steel circulation pump with cooled shaft seal and exposed shaft, without bearings in the liquid. Automatic capa...

SCREW COMPRESSOR “AIRCRAFT” TYPE A-K-MAX 7.5-10-270F K

• Manufacturer: CHAMPION

1050 L/min at 10 bar, 7.5 Kw 400V – 62 Db Direct-drive screw compressor requiring no maintenance of the drive unit, equipped with a 270 L tank and refrigerated dryer, featuring an intelligent EasyTRONIC IV electr...

EMG 45T

• Manufacturer: EMG

With electro-pneumatic mono-disc clutch Technical data Standard equipment Fixed frame 6-digit counter with reset switch 8-digit counter without reset switch Automatic lubrication with level control Bi-manual push...

Rimspolish & Ditel Ridi 13 Blackedition CNC I CNC Lathe for Tires

• Manufacturer: Rimspolish & Ditel

We hereby offer this used Rimspolish & Ditel Ridi 13 Blackedition CNC CNC lathe for tires from 2020, located in Switzerland. With a robust motor power configuration, delivering 1.2 kW in the X-axis and 1.8 kW in ...