Used phase comparison

F-400 Flanging Machine

• Manufacturer: T-DRILL

F-400 Flanging machine for both cold and hot forming With the T-DRILL F-400 Flanging machine lips and flanges are formed directly on the end of the pipe – a system that saves up to 40 % in time and costs compared...

S-56 Feed Tables AFT & MFT

• Manufacturer: T-DRILL

Automatic Feed Table (AFT) and Manual Feed Table (MFT) Improves the manifold/collector production efficiency. AFT Adding the Automatic Feed Table to S-56 Improves the manifold/collector production efficiency. The...

Series 6103

• Manufacturer: ECO PHYSICS

The S-6103 consists of a single-mount housing containing two thermal mass flow controllers, a module for ozone generation, a photometer, a distribution unit with three glass output ports, a mixing chamber, a reac...

F-200 Flanging Machine

• Manufacturer: T-DRILL

F-200 Flanging Machine for both cold and hot forming With the T-DRILL F-200 flanging machine lips and flanges are formed directly on the end of the pipe – a system that saves up to 40 % in time and costs compared...

T-115 Cu Collaring Machine

• Manufacturer: T-DRILL

T-115 Cu Collaring Machine The transportable T-115 Cu Collaring Machine fits perfectly e.g. for the needs of heat exchanger manufacturers. The machine produces extruded outlets for branch connections in copper tu...

S-28 Collaring Machine

• Manufacturer: T-DRILL

S-28 Collaring Machine for bent tubes T-DRILL S-28 is a slim collaring machine that is designed especially for bent tubes with tight curves when collaring machine S-56 is not suitable. S-28 is equipped with the n...

TEC-220 Collaring Machine

• Manufacturer: T-DRILL

TEC-220 Collaring Machine for mechanically formed T-outlets up to SCH 40 pipes T-DRILL TEC-220 is a powerful Collaring machine for up to SCH 40 pipes. The TEC-220 forms mechanically extruded outlets directly on r...

S-56 FBH (Flying Branching Head)

• Manufacturer: T-DRILL

S-56 Collaring Machine for producing T-outlets on both straight and bent tubes The movable S-56 unit in FBH provides the best use of the floor space as tube stays still during the collaring process saving more th...

S-56 Collaring Machine

• Manufacturer: T-DRILL

S-56 Collaring Machine for producing T-outlets on both straight and bent tubes T-DRILL S-56 is a highly effective collaring machine for producing T-outlets for brazed and welded joints. The machine is designed fo...

Tektronix TSG422

• Manufacturer: Tektronix
• Model: TSG422

TSG422 Features Conforms to ITU-R BT. 601/656, EBU Tech 3267, and SMPTE 125M, 259M, and RP165 10- or 8-Bit Signal Generation Parallel Digital Video Test Signal Outputs Four Serial Digital Video Outputs (Opt. 1S) ...

SF1130/SF1131 Beidou taming crystal oscillator

• Manufacturer: 数英仪器/suin

Introduction: SF1130, SF1131 GPS/Beidou Disciplined Crystal Oscillator is a precision frequency signal source with low phase noise. It uses a high-speed microprocessor as the core and uses a high-precision timing...

SF1642 High Stability Quartz Crystal Frequency Standard

• Manufacturer: 数英仪器/suin

Introduction: The SF1642 frequency standard is a precision frequency signal source that can be used as a primary or secondary frequency standard in factories and laboratories. It has the characteristics of high p...

JDSDY-1 Automatic Paper Counting Machine

JDSDY-1 Automatic Paper Counting Machine The JDSDY-1 is a automatic paper counting machine, ideal for the packaging industry and applications of large-scale production. This machine uses a microcomputer controll...

Handheld LCR Meter LCR-1010/LCR-1100

• Manufacturer: 固纬电子/GWINSTEK

Introduction: The LCR-1000 series includes 2 models. The LCR-1100 provides a test frequency of up to 100kHz, and the LCR-1010 provides a test frequency of up to 10kHz. The series provides selectable test voltages...