Building Filters
- Trusted Seller
SWIVELLING PARALLEL-JAW VICE “SCHAUBLIN”
- Manufacturer: Schaublin
field of swivel 0-360° Weight: 1.3 kg
Biel/Bienne, Switzerland - Trusted Seller
2015 A. HAAS MULTIGRIND CU
- Manufacturer: Haas
X,Y,Z linear axes CU Gentry A Rotation axis SK50 n=1000 1/min C axis = -70 +250 Operating hours 21`700 h Equipment: - CNC software V04.07+SP 04 - PLC basic program: 04.07.23 - Workpiece - Renishaw MP250 probe - T...
Niederhelfenschwil, Switzerland - Trusted Seller
1991 DANOBAT RTM 1600 - CNC
- Manufacturer: Danobat
borehole: diameter: 203.2 mm Object: 54094 | Controls: SIEMENS 810 | Grinding length: 1600 mm | Grinding width: 900 mm | Workpiece height (max) with largest wheel: 600 mm | Number of processing axes (excl ...
Niederhelfenschwil, Switzerland - Trusted Seller
2016 MAZAK VTC 800/30SRL
- Manufacturer: Mazak
- Model: VTC 800
further options • Air blowing out of the workpiece • High pressure 15 bar through spindle • Mazak Monitoring B (Renishaw RMP60) • Tool length measurement x2 Table centre partition • NC rotary table, 360,000 posit...
Niederhelfenschwil, Switzerland - Trusted Seller
2003 DMG DMU 50 M
- Manufacturer: DMG Mori
- Model: DMU 50
26,000 operating hours, 3,812 working hours Object: 53751 | Controls: HEIDENHAIN | Number of processing axes (excl parallel axes): 3 | X-axis travel: 500 mm | Y-axis travel: 400 mm | Z-axis travel: 400 mm | Ta...
Niederhelfenschwil, Switzerland - Trusted Seller
2003 DMG DMU 50
- Manufacturer: DMG Mori
- Model: DMU 50
4726 spindle hours, 10,000 operating hours Object: 53750 | Controls: HEIDENHAIN | Number of processing axes (excl parallel axes): 3 | X-axis travel: 500 mm | Y-axis travel: 400 mm | Z-axis travel: 400 mm | Tab...
Niederhelfenschwil, Switzerland - Trusted Seller
1998 SORALUCE SP 6000
- Manufacturer: Soraluce
- Model: SP 6000
Known issues: - Milling head does not swivel due to a defective sensor - Gear stage 2 cannot be switched on
Niederhelfenschwil, Switzerland - Trusted Seller
2002 KERN HSPC 5 ACHSIG
- Manufacturer: Kern
Operating hours: Spindle 12,324h Programme run 27,356 Accessories: -2-axis NC rotary table with EROWA -tool measurement Blum -measuring probe -tool magazine HSK25 -workpiece magazine for EORWA ITS50 tool holder ...
Niederhelfenschwil, Switzerland - Trusted Seller
2008 FEHLMANN PICOMAX 60 M
- Manufacturer: Fehlmann
- Model: PICOMAX 60 M
With EROWA automation Clamping system: MECATOOL GPS 120 Equipment: - BLUM tool breakage monitoring - Fehlmann ATS 160 CNC rotary table - Filter system 600 l
Niederhelfenschwil, Switzerland - Trusted Seller
Niederhelfenschwil, Switzerland - Trusted Seller
2005 CHIRON MILL 2000 HIGH SPEED
- Manufacturer: Chiron
- Model: MILL 2000
including chip conveyor Duty cycle 53'700h Spindle hours 26'400h Tool holder 5 pieces The following auxilliaries can be bought seperately at additional cost: Röhm double clamps Torsion springs for tool holders ...
Niederhelfenschwil, Switzerland - Trusted Seller
2007 HURCO VTX U
- Manufacturer: Hurco
- Model: VTXU
Accessories: -chip conveyor -2 pallets various spare parts Immediately available
Niederhelfenschwil, Switzerland - Trusted Seller
2005 TONG-TAI TMV-1100A
- Manufacturer: Tongtai
Accessories: - 3D measuring probe - Chip conveyor - Cooling system
Niederhelfenschwil, Switzerland - Trusted Seller
2013 MAZAK V-815/80
- Manufacturer: Mazak
Object: 50182 | Controls: MAZATROL 640M | Number of processing axes (excl parallel axes): 3 | X-axis travel: 2000 mm | Y-axis travel: 810 mm | Z-axis travel: 760 mm | Spindle revolutions (max): 6000 /min | N...
Niederhelfenschwil, Switzerland - Trusted Seller
2012 CHIRON FZ 12K W HIGHSPEED
- Manufacturer: Chiron
- Model: FZ12
- Shuttle table machine - Knoll (KSS) watertank FKA/350 (2011) - Highspeed plus package - - Renishaw probe, with a Chiron Lasercontrol System F1000 and with a workpiece support control - Peisseler AWU 160P rotary...
Niederhelfenschwil, Switzerland