Used parallel in Czech Republic

ECOM spol. s r.o. THETA300 Preparative Pump

• Manufacturer: Ecom

OEM built-in pump with flow rate up to 300 ml/min. Go to detailed product description Theta300 is a pump with two pump pistons connected in parallel, with flow rate range from 1 to 300 ml...

ECOM spol. s r.o. ECP2200 Preparative Pump

• Manufacturer: Ecom

Preparative pump with flow-rate ranges of 0.001 - 250 ml/min, with very high pressure of up to 30 MPa at a flow rate of 100 ml/min. Go to detailed product description This pump works as an ...

ECOM spol. s r.o. IOTA300 Preparative Pump

• Manufacturer: Ecom

OEM built-in pump with flow rate up to 300 ml/min. Go to detailed product description Iota 300 has a flow rate range from 0.1 to 300 ml/min . Maximum operating pressure is 7.5 MPa (1015 PSI)...

ECOM spol. s r.o. IOTA50 Preparative Pump

• Manufacturer: Ecom

OEM built-in pump with flow rate up to 50ml/min. Go to detailed product description Iota 50 has flow-rate range from 0.1 to 50 ml/min. Maximum operating pressure is 30 MPa (4351 PSI). It has...

ECOM spol. s r.o. ECP2050 Preparative Pumps

• Manufacturer: Ecom

Preparative HPLC pump with flow-rate ranges of 0.001 to 50 ml/min are offered in four materials versions of vetted parts as: stainless steel A316L, Hastelloy, Titanium and PEEK. Go to detail...

Material crusher COMAFER MAC SP600

• Manufacturer: Comafer

Single-shaft shredder of wood waste ideal for medium-sized carpentry operations. The COMAFER MAC SP600 material crusher is a single-shaft crusher with hydraulic pressure against the material crushing shaft, ideal...

five-combination FAHD KOMBI 410

• Manufacturer: FAHD

The five-operation machine - Planer / Stretcher / Grooving machine / Bottom milling machine / Formatting saw is intended for the most demanding do-it-yourselfers or for carpentry workshops with very limited space...

five-combination FAHD KOMBI 300

• Manufacturer: FAHD

The five-operation machine - Planer / Stretcher / Grooving machine / Bottom milling machine / Formatting saw is intended for the most demanding do-it-yourselfers or for carpentry workshops with very limited space...

W-200 double-spindle saw

Technical parameters of the saw: Diameter of cutting discs max. 350 mm The largest spacing of edge discs (larger on request) 320 mm Max. cut thickness 200 mm Minimum cut thickness 30 mm Maximum prism width 500 mm...

SOLLAU Maxgrip

• Manufacturer: Sollau

The Maxgrip permanent magnetic chuck excels above all with its high clamping force and versatility. The combination of a pole plate with a relatively fine parallel arrangement of poles and the possibility of cont...