Used nut tapping machine

Trusted Seller
1999 SHIMAZU 3NF
- Manufacturer: SHIMAZU
Equipped With * Standard Hopper Tapping range: M5-M10 | Across flats: 8mm - 15mm min-max | Speed: 1400 -2100 RPM
North America
Trusted Seller
SHIMAZU SUPER 3F
- Manufacturer: SHIMAZU
Equipped With * Universal hopper * Magnetic chip separator
North America
1968 NATIONAL M10 (5/16")
- Manufacturer: National
- Model: M10
Dies: 5 | Max. across flats (mm): 14 | Max. die kick out (mm): 19 | Max. pieces per minute: 150
Kópavogur, Iceland
1972 NATIONAL M10 (5/16") -S2
- Manufacturer: National
- Model: M10
Dies: 5 | Max. across flats (mm): 14 | Max. die kick out (mm): 19 | Max. pieces per minute: 200
Kópavogur, Iceland
2020 Makino A51NX
- Manufacturer: Makino
- Model: A51
The Makino A51 NX is a high-performance horizontal machining center designed for precision, speed, and reliability in high-volume manufacturing environments. Featuring a 400mm pallet size, a 14,000 RPM high-torqu...
Fremont, CA
Trusted Seller
DH-28
- Manufacturer: Ficom
CSA ELECTRICS: 220V/1PH/60HZ COMES WITH THE FOLLOWING STANARD ACCESSORIES: DRAW BAR, ADAPTER, TAPER SHANK FOR DRILLING CHUCK, DRILLING CHUCK, ARBOR, T-SLOT BOLT, WASHER, NUT, TILTED WEDGE, SPANNER AND OIL GUN ...
Calgary, Canada
40T 34″ L TO R X 39″, 28″ DAYLIGHT, 10″ STROKE, FOUR-POST
HESS MODEL 40-3238-10-18. S/N A3517. BETWEEN THE POSTS: 37” X 27”. BETWEEN THE GUIDE BUSHINGS: 34” X 24”. NOMINAL: 34” X 39”. CLAMP CYLINDER: PARKER 8” BORE (SERIES 3H; 5” DIA ROD; 3000 PSI) WITH 10” MAX STROKE. ...
Grand Rapids, MI
Trusted Seller
Sharp RD-2500
- Manufacturer: Sharp
- Model: RD-2500
- Column size: 549.9099999999999 millimeter
NEW SHARP 21.65" COLUMN, 98.42" ARM, RADIAL DRILL MODEL: RD-2500 **MADE IN TAIWAN** FEATURES: Hardened and Ground Arm slide ways, gears Arm Elevation is controlled by Hydraulic Motor Safety Device prevents arm ...
Harrison, NJ
Trusted Seller
WILLIS MACHINERY RD1300H
- Manufacturer: Willis
WILLIS MACHINERY (NEW) MODEL RD1300H RADIAL DRILL 2" STEEL DRILLING 2-3/8" CAST IRON DRILLING 1-1/4" STEEL TAPPING 1-1/2" CAST IRON TAPPING 3-1/2" STEEL BORING 5" CAST IRON BORING 9-7/8" SPINDLE STROKE MT5 SPINDL...
Dodge Center, MN
Trusted Seller
WILLIS MACHINERY RD-1100
- Manufacturer: Willis
- Model: RD-1100
WILLIS MACHINERY (NEW) MODEL RD-1100 RADIAL DRILL 1-3/4" STEEL DRILLING 2-1/8" CAST IRON DRILLING 1" STEEL TAPPING 1-1/4" CAST IRON TAPPING 3-3/8" STEEL BORING 4-3/4" CAST IRON BORING 9-7/8" SPINDLE STROKE MT4 SP...
Dodge Center, MN
Trusted Seller
Sharp RD 1230 Radial Arm Drill 4 Foot
- Manufacturer: Sharp
- Model: RD-1230
Sharp RD 1230 Radial Arm Drill 4 Foot CAPACITY Cast Iron Drilling 2-3/16" Capacity Tapping 1-1/2" Boring 4-3/4" Steel Drilling 1-5/8" Capacity Tapping 1" Boring 3-3/8"+ Total Power Consumptions • 220V 8KVA/25 amp...
California, USA
Trusted Seller
Nut Tapping Tools
TGN 3H M10X1.5 OX 6H (10 pcs) 5 (+8 pcs) TGN 3H M10X1.5 OX 6H +0.1 (10 pcs) 1 TAFLET size W8. 2-14TPI, type 6H P DIN 371 H.S. (10 pcs) 12 (+4 pcs) TAFLET size W8. 2-14TPI, type 6H DIN 371 H.S. (10 pcs) 6 (+8) SPI...
Turin, Italy
Trusted Seller
TAPPING DRILL
- Manufacturer: SARA
Features Tapping Drill Origin Italy Condition Used
Lima, Peru
Trusted Seller
1995 NEDSCHROEF MW53
- Manufacturer: Nedschroef
- Model: MW53
Thread diameter: M20-M33 | Max. width acros flats: 41 mm | Max. outside dia. of round pieces: 32-53 mm | Bar dia.: 44 mm | Cutting length: 14-65 mm | Press power: 130 to | Output – pieces/min: 150
Norderstedt, Germany
Trusted Seller
NATIONAL M20 S2 CNF
- Manufacturer: National
- Model: M20-S2
Thread diamter: 12-20mm | Number of dies: 5 | Number of stations (incl. cut off): 6 | Diameter range: 16mm | Output – pieces/min: 105 | Max. cut-off length: 27 mm | Max. width acros flats: 30 mm
Norderstedt, Germany