Building Filters
Nutap MAS14 Nut Tapper
used
- Manufacturer: Nutap
M6 – M14 1/4″ to 1/2″ Weight: 3500 lbs | Dimensions: 45 × 44 × 67 in
Posen, IL
Posen, IL
Nutap GA-12 Bent Shank Single Spindle Nut Tapper
used
- Manufacturer: Nutap
MAXIMUM THREAD DIAMETER M-12 (1/2″) MAXIMUM PART DIAMETER 25MM MAXIMUM PART LENGTH DEPENDING ON PRODUCT – THREAD
Posen, IL
Jian Hwa – HRT13D – 2 Spindle Reversible Tapper
used
Model HRT-13 Tapping Size M3-M8 (1/8 – 5/16) Max Stroke (mm) 45 Max AC (mm) 18 Max Production Speed 70 (C) 90 (D) Main Power (KW) 0.75 (C) 1.5 (D) Main Power Comsumption (KW/h) 4.3 (C) 5.8 (D) Oil Tank (L) 120 Ma...
Posen, IL
5/16″ 4 Spindle Dah Lian Tapper (New Motors)
used
- Manufacturer: Dah Lian
Capacity #8-5/16 M5-M8 Production Rate (MAX) 400-200 Motor (HP) 1HP-2 Lubricant (L) 300 TAP (mm) M185 x 25R Net weight (kgs) 700 Machine Dimension (cm) 128 x 153 x 160 Setup for 1/4 parts, should run up to 5/16â...
Posen, IL- Trusted Seller
SNOW 1-NT
used
- Manufacturer: Snow
Rated capacity in mild steel: #0 to #10 Tap | Tap head stroke (max): 2" | Tapped holes per hour: 6,000 Max | Approx. weight: 700 lbs
Ivyland, PA - Trusted Seller
1984 SHIMAZU SUPER 5F
used
- Manufacturer: SHIMAZU
NUT TAPPING MACHINE * Dual vib bowl feeders ** Machine is currently set up to tap stamped plate nuts. >> It was originally designed to tap flange or round nuts, but it will need some parts to do so.
Vaughan, Canada - Trusted Seller
SHIMAZU SUPER 4A
used
- Manufacturer: SHIMAZU
TWIN SPINDLE NUT TAPPING MACHINE * Rotor blade hopper * Hex nut tapping
Vaughan, Canada - Trusted Seller
2009 Somsan CF-38
used
- Manufacturer: Somsan
SINGLE SPINDLE NUT TAPPING MACHINE * Vibratory Feeder * Hydraulic Clamping for Round nut tapping
Vaughan, Canada - Trusted Seller
SHIMAZU SUPER 3F
used
- Manufacturer: SHIMAZU
TWIN SPINDLE NUT TAPPING MACHINE * Universal hopper * Magnetic chip separator
Vaughan, Canada - Trusted Seller
1976 NUTAP MAS-14
used
- Manufacturer: Nutap
- Model: MAS-14
NUT TAPPING MACHINE * Universal Hopper * Flange Nut tooling for 5/16" and 3/8" nuts **Refurbished & Never used in production since
Vaughan, Canada - Trusted Seller
1976 NUTAP MAS-14
used
- Manufacturer: Nutap
- Model: MAS-14
NUT TAPPING MACHINE * Vibratory Bowl * Tooled for M6x1 Special Flange Nut with taper end
Vaughan, Canada - Trusted SellerVaughan, Canada
- Trusted Seller
SHIMAZU SUPER 3F
used
- Manufacturer: SHIMAZU
TWIN SPINDLE NUT TAPPING MACHINE * Universal hopper * Magnetic chip separator
Vaughan, Canada - Trusted Seller
1999 FK (Fwu Kuang) FN32B
used
- Manufacturer: FK (Fwu Kuang)
FOUR SPINDLE NUT TAPPING MACHINE * Tooling for 5/8”, 3/4” hex and extra height nuts * Tooling for 5/8” flange * Operator manual
Vaughan, Canada
