Building Filters
- Trusted Seller
HAUSER QLA1000
- Manufacturer: Hauser
- Model: QLA1000
Used 60" Hauser Model QLA1000 Cross Cutter/Sheeter Designed for Flexible Materials. Consisting of a 60" single position shafted unwind for 30" diameter rolls (possible 40" diameter) which is directly hooked into ...
Hainesport, NJ - Trusted Seller
Allied Flexomaster
- Manufacturer: Allied
- Model: FLEXOMASTER
Allied Flexomaster 10-inch used flexo press featuring 4 colors, unwind, roll end shut off, infeed nip, splice table, web guide, 3 die stations, laminating, 2 waste rewinds, and single product rewind
Old Saybrook, CT - Trusted Seller
CUMBERLAND 1837
- Manufacturer: Cumberland
Used Cumberland Model 1837 granulator. Has 18" X 37" feed throat, 5 knife steep angle step adjustable rotor knives (10 segments), each knife being Approx. 18.5" wide, 2 bed knife. Belt driven by a 100 HP 460 volt...
Hainesport, NJ - Trusted Seller
2.5M PRESS TECHNOLOGIES - HYMAC WETLAP MACHINE MODEL 100 HP-SF WITH HEAVY DUTY PRESS COMPLETELY REBUILT 2018
- Manufacturer: HYMAC
One (1) Used Press Technologies - Hymac Model 100 Wet Lap Twin Wire Press, Model 100 HDP Heavy Duty Press, and Model 100 Cutter Layboy. Line rebuilt by Press Technology in 2018. New electrical and control system....
Chalfont, PA - Trusted Seller
2014 ABG ECTRS330
- Manufacturer: ABG
2014 ABG ECTRS 330 13-inch used turret rewinder featuring infeed section with rotary slitting unit and nip unit, encoder attachment for connection to press/rewinder, 4 servo-driven rewind spindles, core gluing un...
Old Saybrook, CT - Trusted Seller
40" WIDE SRC SYSTEMS MODEL 1060CS DUPLEX CENTER SURFACE SLITTER
- Manufacturer: SRC SYSTEMS LTD.
Maximum roll diameter: 40” Maximum roll width: 40” Minimum roll width: 14” Maximum roll weight: 1750 lbs Unwind drive motor: 7.5Kw AC inverter motor with 3:1 ratio gearbox and EtherCat network Core size: 3” + 6” ...
Chalfont, PA - Trusted Seller
1988 Welex 41''
- Manufacturer: Welex
Used Welex 41" sheet extrusion line: - 3.5" 30/1/ L/D Welex extruder. Has vented and plugged barrel, but includes 2 stage screw and spare screw. Has electrically heated water cooled system with water pump. Extrud...
Valley Cottage, NY - Trusted Seller
1988 Welex 41''
- Manufacturer: Welex
Used Welex 41" sheet extrusion line:- 3.5" 30/1/ L/D Welex extruder. Has vented and plugged barrel, but includes 2 stage screw and spare screw. Has electrically heated water cooled system with water pump. Extrude...
Valley Cottage, NY - Trusted Seller
Pilot Coating Line 34 inch wide
- Manufacturer: Pilot Coating Line
Used Pilot Coater No. 1. Approximately 34" wide Mayer rod-type pilot coating line designed for lab-scale or product development applications. Includes single-spindle unwind stand with Magpower Sygnus web tension ...
Hainesport, NJ - Trusted Seller
Magna Graphics Gravure Coating Line 64" wide
- Manufacturer: Magna Graphics Gravure Coating Line
Used Magna Graphics Offset Gravure Coating Line No. 20. 64" wide × 1,610 FPM (491 m/min) single-sided 3-roll offset gravure coating line, installed 1986. Designed for solvent- or water-based coatings on film or p...
Hainesport, NJ - Trusted Seller
2012 Gonderflex GFLX 2800
- Manufacturer: Gonderflex
2012 Gonderflex GFLX 2800 28-inch used flexo press featuring 10 colors, unwind unit with web guide, splicing table, hydraulic roll lift and automatic Magpower close loop tension control system with electromagneti...
Old Saybrook, CT - Trusted Seller
ELITE CAMERON TD4400
- Manufacturer: ELITE CAMERON
Used Elite Cameron model two-drum rewinder. 4400 maximum speed; 3000 fpm maximum width; 82" unwind; 3" or 6" floor pickup; 60" maximum diameter; 6000 lb maximum roll weight; 3" or 6" rewind; bucket dump unloading...
Hainesport, NJ - Trusted Seller
APPLETON 90"
- Manufacturer: Appleton
Used Appleton 9-Roll Super Calender, 90 inch wide. - Supports paper weights from 32 to 550 grams per square meter (gsm) - Includes a bowed roll - Martin RH 92 2/83 unwind system with hydraulic package and clutch ...
Hainesport, NJ
