Used nip roll in England, United Kingdom

David Bridge 6in dia x 12in two roll lab mill

• Manufacturer: David Bridge

David Bridge 6in dia x 12in two roll lab mill, Manual nip adjustment, Fully guarded, Chrome plated rolls, Even and friction gears, 7.5HP right angle drive motor through reduction gearbox. Complete with star...

Collin Model W110E Two Roll Lab Mill

• Manufacturer: Collin Model W110E Two Roll Lab Mill

QTY 1 x Collin Model W110E Two Roll Lab Mill, Machine number: 1132-22-11, Supplied in 2015 (CE marked), Roll size: 110mm dia x 350mm wide, Hard chrome plated, Cored rolls with rotary joints fitted for steam ...

Shaw (UK) 24in dia x 68in wide 3 roll vertical stack calender

• Manufacturer: Shaw (UK)

QTY 1 x Shaw 24in x 68in 3 roll vertical stack calender, Motorised nip adjustment, Cored rolls with rotary joints for heating/cooling, Even and friction gears, Sleeve bearings with automatic lubrication, 125...

Agila (Belgium) Two Roll Lab Mill, Type: LW 150 X 350

• Manufacturer: Agila (Belgium) Two Roll Lab Mill, Type: LW 150 X 350

Qty 1 x Agila (Belgium) Two Roll Lab Mill, Type: LW 150 X 350, serial no. 06422 Year of manufacture: 2007, Roll size: 150mm dia x 350mm wide, Manual nip adjustment with digital readout, Electrically heated ro...

Dr Collin 850mm wide x 252mm dia 4 roll inverted L calender

• Manufacturer: Dr Collin

QTY 1 x Dr Collin (Germany) 850mm wide x 252mm dia 4 roll inverted L calender, Manual nip adjustment, Cored rolls with rotary joints fitted, Roller bearings, 5.5kw direct drive variable speed geared motor to ...

Shaw Three Roll Calender

Shaw Three Roll Calender 750 mm wide x 300 mm diameter Hand nip With guards Rotary joint 1 piece bed plate Holroyd gearbox Complete with stop / start mounted on machine

Farrel Bridge Farrel Bridge 300mm (12in) wide x 150mm (6in dia) two roll lab mill

• Manufacturer: Farrel

Machine No. 95M2047, Year 1996 (with CE mark), Swing sided type, Manual nip adjustment, Chrome plated rolls, Cored rolls with rotary unions fitted (for water circulation if required), Fully guarded with safe...

Two Roll Lab Mill – JRD BIPEL

• Manufacturer: Bipel

Two Roll Rubber Mixing Laboratory Mill 300mm x 150mm rolls Roller type bearings Nip fully guarded Motorised nip adjustment Roller speed variable up to 32 rpm Grease lubrication Roller reverse system

Reed 40” x 16” Two Roll Mill

• Manufacturer: Reed

Reed 40” x 16” Two Roll Mill Hand operated nips Right angle drive Tray fitted beneath Mill Rolls

Comerio 1550mm Two Roll Mill

• Manufacturer: Comerio Ercole

Two Roll Rubber Mixing Mill Periphery drilled Rotary joints for steam heating / water cooling Front roll = 10.72 rpm (18.51 m/min) Rear roll = 12.76 rpm (22.03 m/min) Friction: 1:1.19 Speed regulator Motor beneat...

Bridge 60” x 22” Two Roll Mill

• Manufacturer: Bridge UK

60” x 22” Two Roll Mill With variable speed control Siemens S7 – 1200 Safety PLC Danfoss 90kW 315 Amp Frequency Drive with Dynamic Braking Resistor Electromotor 90kW 980rpm Front Roll Speed max. speed (50Hz) 14.1...

Two Roll Mill 1m wide x 400mm diam.

Two Roll Mill 1m wide x 400mm diam. Hydraulic Nips With motor and gearbox AEG motor, 380volts, 107amps, 55kw, 1475rpm, 50 cycles Unidrive Lunn Safety gear fitted front and back of Mill Complete with control panel...

Comerio Ercole (Italy) 610mm dia x 1700mm 3 roll vertical stack calender

• Manufacturer: Comerio Ercole

Qty 1 x Comerio Ercole (Italy) 610mm dia x 1700mm 3 roll vertical stack calender, Serial no. 3097A, Original year 1977, but overhauled by Comerio in 2006, Motorised nip adjustment, Even and friction gears, Sl...

Farrel 18inch x 9inch Two Roll Mill

• Manufacturer: Farrel

Farrel 18” x 9” Mill Trays fitted beneath Mill rolls Motor spec 3 phase, 415 volts, 20HP Gearbox Manual nip adjustment Water cooled Cored rolls Safety cage with 4 plunger type limit switches for safety Start / em...