Used mould temperature controller

BEcom Mfg BE-IP-240

• Manufacturer: BEcom Mfg

This traveling tray proofer is designed to give dough pieces a rest, or intermediate proof, between dividing and final moulding, in an automated fashion. It can be operated in manual or automatic mode, according ...

CVS Vacuum Finishing Line - CEFLA

• Manufacturer: Cefla

This is a professional UV Finishing within reach of your business, and is designed with small to medium-sized productions in mind. The CVS series is simple to install, use and maintain. UV finishes are an attra...

Used O.M.A.R. Semi-Automatic Blister Packaging Machine

• Manufacturer: OMAR
• Model: FANTASY

1 Used O.M.A.R. Semi-Automatic Blister Packaging Machine. Machine is designed to produce both thermoformed and cold blisters up to 8 cycles per minute. Mould (tooling) specifications: 230mm W x 150mm L. Maximum d...

Molding line for bars WESTBROOK - for moulds 800 x 210 mm, moulds 9 x 100 gr. bars

• Manufacturer: WESTBROOK

-S30229 Agitator tank without nameplate, on a stand made of standard steel with a capacity of approx. 2,000 liters. -S30230 CHOCOTEC (NAGEMA) mass pump, type SP-3, machine no. 970102/1, built in 1997. -S30231 SOL...

2001 Nissei ASB 650 EXHD Injection Stretch Blow Moulding machine

• Manufacturer: Nissei

Nissei ASB 650 EXHD Injection Stretch Blow Moulding machine, year 2001 Includes: * Complete 19.0L PC tooling * Motan Resin dryer * Motan Hopper * Motan Mould temperature control units Machine and mould were ove...

BINDLER Molding line for Bars - Mould size 425 x 275 mm

• Manufacturer: BINDLER

-S30123 Agitator tank without nameplate. -S30124 THOUET gear-type mass pump, type ZP-63/5S, machine no. 2228/78, built in 1978. -S30125 Chocolate tank without nameplate. -S30126 SOLLICH gear-type mass pump, type ...

Second hand Mould and cooling roll WOLF - type F-1250

• Manufacturer: Wolf

incl. rotation connector for cooling water feed-through. The roller is installed in a stable tubular frame and can be adjusted in working height up to 60 mm. The roller surface is ground and hard-chrome plated. ...

2003 arburg PREFORM INJECTION MOULDING LINE

• Manufacturer: Arburg

PREFORM INJECTION MOLDING LINE Year: 2003 Arburg Preliner 570-120H Suggested price including tooling it's the complete line incl. machine, dryer, temperature control, resin feeder, and preform tools 16 cavity…

TOOL-TEMP TT-216000

• Manufacturer: Tool Temp
• Noise level: 70 decibel

Air temperature +2 degC up to 45 degC -Cooling water IN/OUT 2"female thread (only at WK)

Mould filling machine WOLF for decoratives - Type W-FW-200, working width approx.: 420 mm

• Manufacturer: Wolf

A WOLF mould filling machine, type FF 400, suitable for continuously filling Makrolon moulds by flooding with chocolate or fat glaze. The moulds stacked in a magazine are taken off by a chain conveyor and passed...

PMF Processing

This unit is an industrial equipment conceived to stamp doughs, replacing manual labour through a mechanical and automated system allowing higher and continuous stamp dough production. Stainless Steel AISI304 fra...

2011 NETSTAL Synergy 1000-60/60/60 2k Injection Moulding Machine

• Manufacturer: Netstal
• Model: SYNERGY 1000-606060

Swiss made 2K injection molding machine (Ma04) including technical documentation, protective housing, with 2x Helios JB WinSystem dry modules, with 3x Tool Temp 188 temperature control units. Directly available....