Building Filters
- Trusted Seller
Servo CNC Mini Mill
- Manufacturer: Servo
Servo Ii Control Pendant, Made In The Usa Name: CNC Mini Mill | Arrival date: 09-04-2025 | Dimensions l x w x h (inches): 40 x 30 x 52 | Capacity: 7" X 7" TABLE | Electrical: 1/50/60/120 | Weight (lb.): 285 | Ava...
$2,499 USDEuclid, OH - Trusted Seller
Servo CNC Mini Mill
- Manufacturer: Servo
Servo Ii Control Pendant, Made In The Usa Name: CNC Mini Mill | Arrival date: 09-04-2025 | Dimensions l x w x h (inches): 40 x 30 x 52 | Capacity: 7" X 7" TABLE | Electrical: 1/50/60/120 | Weight (lb.): 320 | Ava...
$1,999 USDEuclid, OH - Trusted Seller
1997 - Daewoo #250B CNC Lathe
- Manufacturer: Daewoo
Location San Antonio. TX Lot # 70 System ID # 4229871 End Date Central Standard Time Start Date Central Standard Time Item # 4229872 10" 3-Jaw Chuck, 24.44" Swing, X-Axis 11.10", Z-Axis 26.77", 3500 Max. RPM
Chicago, IL 
2003 Fryer CNC Combination Flat lathe, Model ET 30, 30" x 80", 1500 rpm, 30 hp, Conversational Fryer CNC ID17637
- Manufacturer: Fryer
- Model: ET-30
- Spindle bore: 152.39999999999998 millimeter
Maximum swing: 30" | Swing over cross slide: 15" | Distance between centers: 80" | Spindle drive motor: 30 HP | Spindle speed: 1500 RPM | Spindle bore: 6" | Equipped with: Fryer Touch 2000i CNC, 20" 6 Jaw Chuck ...
Pennsylvania, USA- Trusted Seller
Servo CNC Mini Mill
- Manufacturer: Servo
Servo Ii Control Pendant, Made In The Usa Name: CNC Mini Mill | Arrival date: 09-04-2025 | Dimensions l x w x h (inches): 40 x 30 x 52 | Capacity: 7" X 7" TABLE | Electrical: 1/50/60/120 | Weight (lb.): 330 | Ava...
$1,999 USDEuclid, OH - Trusted Seller
1997 Used OKUMA LU15M CNC LATHE | Lathes CNC
- Manufacturer: Okuma
- Model: LU15
Imperial Metric Okuma Model LU-15M Twin Turret Live Milling CNC Lathe SWING OVER BED 20.87" SWING OVER CARRIAGE 14.96" SWING OVER CROSS SLIDE 12.99" MAXIMUM TURNING DIAMETER 10.62" MAXIMUM TURNING LENGTH 23.62" T...
Elk Grove Village, IL - Trusted Seller
2007 Colchester MultiTurn 3000 CNC Lathe
- Manufacturer: Colchester
- Model: MULTITURN 3000
Z-Axis: (Saddle Travel): 55.0″ Equipped with: Fanuc CNC Control 8 Station Bi-Directional Turret Tailstock 10″ Chuck
- Trusted Seller
2005 32” X 43” DMG GILDEMEISTER “CTX620 X 1000” CNC TURNING CENTER w/SIEMENS 840D CNC CONTROL - Y-AXIS - LIVE MILLING - 15" 3-JAW CHUCK
- Manufacturer: Gildemeister
- Model: CTX620X1000
CTX620X1000 DMG GILDEMEISTER CNC TURNING CENTER Imperial Metric W/Y-AXIS & LIVE MILLING New 2005, Serial No 80409390300, Model CTX620X1000 EQUIPPED WITH: Siemens 840D CNC Control 12(+4) Position VDI 50 Turret w/L...
- Trusted Seller
2004 Milltronics ML-18 G CNC Flat Bed Lathe (2006)
- Manufacturer: Milltronics
- Model: ML18
Imperial Metric Milltronics Model ML-18 CNC Flat Bed Lathe Tailstock Quill Travel 6" Rapid Traverse Rates 500 IPM Machine Dimensions 120" x 83" Machine Weight 7,600 lbs Centurion 7 CNC
Elk Grove Village, IL 
2016 Omag Mill 4 X CNC Router - Low Hours
- Manufacturer: Omag
- Model: Mill 4X
- Buyer responsible for tear down, shipping, rigging and installation (quote can be provided upon request) Machine is under power for inspection if necessary. Machine will be sold as is / where is and implies no ...
- Trusted Seller
2002 Johnford ST-130A 2 Axis CNC Slant Bed Lathe ()
- Manufacturer: Johnford
- Model: ST130B
Imperial Metric Johnford ST-130A 2 Axis CNC Slant Bed Lathe (2002) Swing over bed/Front cover 36.2" Standard turning diameter 27.5" Swing over carriage 27.5" Maximum cross travel (X axis) 15.7" Maximum longitudin...
Elk Grove Village, IL - Trusted Seller
Okuma LU-300 CNC Lathe Main Spindle Headstock
- Manufacturer: Okuma
- Model: LU300
In Good Used Condition. Was removed from an Okuma LU-300 Lathe. 3" Bore dia x 21-3/4" length. 14" x 27" base. 24-3/4" height. If this item ships as Flat Rate Freight please see details in Shipping tab
$850 USDMillersburg, IN - Trusted Seller
Okuma LU-25 Horizontal CNC Lathe Spindle Headstock
- Manufacturer: Okuma
In Good Used Condition. Was removed from an Okuma LU-25 Lathe. 3.2" Actuator bore dia. 9-3/4" Nose OD. 13-1/2"x 19" Base. 19" Height. If this item ships as Flat Rate Freight please see details in Shipping tab
$850 USDMillersburg, IN - Trusted Seller
Okuma LU-300 CNC Lathe Main Spindle Headstock
- Manufacturer: Okuma
- Model: LU300
In Good Used Condition. Was removed from an Okuma LU-300 Lathe. 2-7/16" Bore dia x 20" length. 3.73" dia at nose end. 14" x 27" base. 24-3/4" height. If this item ships as Flat Rate Freight please see details i...
$850 USDMillersburg, IN - Trusted Seller
Okuma LU-15 CNC Lathe Main Spindle Headstock
- Manufacturer: Okuma
- Model: LU15
In Good Used Condition. Was removed from an Okuma LU-15 Lathe. 3.5" Bore dia x 29" length. 15-1/2" x 20" base. 18" height. If this item ships as Flat Rate Freight please see details in Shipping tab
$1,020 USDMillersburg, IN 
Siemens T4F CNC Lathe
- Manufacturer: Siemens
- Model: T4F
Good condition Siemens T4F CNC Lathes manufactured in 2016. Located in USA and other countries. Click request price for more information.
USA
