Used machines cnc in osutoraria

MORI SEIKI SL1040B03 CNC LATHE OEM SUB‑ASSEMBLY

• Manufacturer: Mori Seiki

This listing is for a USED Mori Seiki SL1040B03 CNC machine sub‑assembly. This OEM component is designed for Mori Seiki SL-series turning centers (e.g., SL‑403, SL‑603). Please refer to your parts or service manu...

2000 Okuma Crown L1060 CNC Lathe

• Manufacturer: Okuma
• Model: CROWN L1060

GENERAL SPECIFICATIONS EQUIPPED WITH 12 Position Turret Henning Chip Conveyor Coolant System

Modern Model 2LD Conventional Cutoff Lathe

Pre Owned 1996 Modern Model 2LD Conventional Cutoff Lathe Serial Number: : General Specifications Equipped With Air Hyd Cylinder 15 HP Variable Speed Drive 3rd Cross Slide Roll Steady Rest Swing Position One Seco...

Daewoo (Doosan) Puma 200 LMA CNC Lathe

• Manufacturer: Doosan

Pre Owned 1999 Daewoo (Doosan) Puma 200 LMA CNC Lathe GENERAL SPECIFICATIONS EQUIPPED WITH Live Tooling All Available Tooling and Manuals

1997 Wasino LG-7 CNC Gang Style Lathe with Auto Loader

• Manufacturer: Amada - Wasino
• Model: G07

Automated Loading Robot 10 Position Rotary Work Stocker Gang Style Tool Lathe 5.25" 3 Jaw Hydraulic Chuck Rigid Tapping Spindle Orientation Coolant Tank with Pump RS 232 Port Interface All Available Manuals

Fuji Machine ANW-30T2 Twin Spindle CNC Lathe Operator Interface Control Panel

• Manufacturer: Fuji
• Model: ANW-30T2

Twin Spindle CNC Date July/2002 Ser# 13640 If this item ships as Flat Rate Freight please see details in Shipping tab

1998 3 HP LAGUN/REPUBLIC "FTV-2 PROTO-TRAK" CNC VERTICAL MILL w/SWI CNC CONTROL - POWER TABLE FEED

• Manufacturer: Lagun
• Model: FTV-2

#FTV-2 LAGUN/REPUBLIC "PROTO-TRAK" CNC VERTICAL MILL Imperial Metric New 1998, Model FTV-2 EQUIPPED WITH: SWI Trak A.G.E. 2 CNC Controls 3 HP Variable Speed Spindle Motor Power Feed To Table Power Down-Feed To Qu...

Okuma LU-15 CNC Lathe Main Spindle Headstock

• Manufacturer: Okuma
• Model: LU15

In Good Used Condition. Was removed from an Okuma LU-15 Lathe. 3.5" Bore dia x 19" length. 15-1/2" x 20" base. 18" height. If this item ships as Flat Rate Freight please see details in Shipping tab

Okuma LU-300 CNC Lathe Main Spindle Headstock

• Manufacturer: Okuma
• Model: LU300

In Good Used Condition. Was removed from an Okuma LU-300 Lathe. 2-7/16" Bore dia x 20" length. 2.6" dia at nose end. 14" x 27" base. 24-3/4" height. If this item ships as Flat Rate Freight please see details in...

Willis #9931-P - Willis DY350X1000C CNC Lathe #9931-P

• Manufacturer: Willis

Willis 13.78″ x 40″ CNC/Manual Flat Bed Lathe, DY350-1000C Inventory # 9931-P Anilam Model 4200 CNC Control Two-Axis Digital Read Out During Manual Operation Servo Motors and Ground Ballscrews AC Spindle Drive El...

OKUMA CNC Vertical Turning Lathe (1999)

• Manufacturer: Okuma
• Model: V80R

Model: V80R | Swing: 40" | 1,016 mm | Chuck size: 24" | 609.6 mm | Power: 30 hp | 22.4 kW | Max rpm: 1,250 RPM | 1,250 RPM | Turning diameter: 40" | 1,016 mm | Tailstock: NO | Control: CNC (OH-Fanuc-L) | Dimensi...

ROYAL PRODUCTS Royal Low-Profile Pullback CNC Collet Chucks 42071

• Manufacturer: ROYAL PRODUCTS

Contact us for pricing on all Royal Products items - BIG DISCOUNTS,UNDER LIST! Traditional pullback design – collet is drawn into chuck for closing, pushed out for opening. Typically used on first-operation where...