Used machines cnc in Groningen, Netherlands

Mondiale Nordic 650CNC (12.340C1)

• Manufacturer: Mondiale
• Model: Nordic 650CNC
• Spindle bore: 106 millimeter

Including Barrufaldi Turret, 8 positions 1 x Steady rest with rolls, diameter 20 - 200 mm 1 x Steady rest with rolls, diameter 180 -410 mm Manual chuck Schunck Rota G, diameter 315 mm Fully enclosed guarding Coolant

EMCO - MAXXMILL 500 new 2014

• Manufacturer: Emco
• Model: Maxxmill 500
• Spindle taper: ISO 40

High preformance spindle 34,5 kW and 110 Nm torq One setup to machine 500 x 500 x 475 mm (5 sides) Top machine for medium production runs 15 to 300 pieces 3560 Spindle hours

‘SMS-PRIMETALS-DANIELI’ High Speed Wire-Rod & Bar-in-Coil Rolling Mill

• Manufacturer: Danieli

FN Steel high‑capacity hybrid rolling mill – continuously modernized through major upgrades – delivers wire rod and bar‑in‑coil from Ø 5.5 mm to Ø 30.0 mm at speeds up to 100 mps. Combining technology from the th...

DMG MORI - DMF 260-7

• Manufacturer: DMG Mori
• Model: DMF 260-7
• Spindle taper: ISO 40

X - travel: 2600 mm | Y - travel: 700 mm | Z - travel: 700 mm | A - axis: 360000 ° | B - axis: - 110 to + 110 ° | Table length: 2900 mm | Table width: 750 mm | Table load: 2150 | Table ø: 750 mm | Feed ...

BRIDGEPORT - VMC 560

• Manufacturer: Bridgeport
• Model: VMC560
• Spindle taper: ISO 40

X - travel: 600 mm | Y - travel: 410 mm | Z - travel: 520 mm | Table length: 840 mm | Table width: 420 mm | Table load: 300 | Feed rate x-axis: 20000 mm/min. | Feed rate y-axis: 20000 mm/min. | Feed rate ...

KIA Hyundai - VX 500

• Manufacturer: Hyundai
• Model: VX500
• Spindle taper: ISO 40

Spindle speed 10.000 Rpm Coolant tank with IKZ 20 bar Chip conveyor

DECKEL MAHO - DMU80P

• Manufacturer: Deckel / Maho
• Model: DMU 80 P
• Spindle taper: ISO 40

Production package equipped with: 600 L Filtration system IKZ Form AD Rotation screen MP10 measuring probe in 2023 new spindel cost 13.500 EUR

MAZAK - VTC 200B-II

• Manufacturer: Mazak
• Model: VTC 200B II
• Spindle taper: ISO 40

Renishaw measuring probe MP-12 IKZ 15 Bar Interface set Performabnce software package Monitoring B prepared not included

MAZAK - VTC 300C-II

• Manufacturer: Mazak
• Model: VTC 300C
• Spindle taper: ISO 40

IKZ 15 BAar Measuring probe MP12 Bohrzyklus with torq depending Performance package Pendel screen Interface set

Matsuura - LX-O

• Manufacturer: Matsuura

X - travel: 330 mm | Y - travel: 300 mm | Z - travel: 250 mm | Table length: 540 mm | Table width: 320 mm | Table load: 100 | Feed rate x-axis: 90000 mm/min. | Feed rate y-axis: 90000 mm/min. | Feed rate ...

DOOSAN - MV 8035

• Manufacturer: Doosan
• Model: MV8035
• Spindle taper: ISO 50

Rigid construction for Heavy Duty jobs Direct drive powerful processing in 2 stage gear drive Fully covered machine Distance spindle nose - table top 200 - 1000 mm Distance spindle nose - to column 1005 mm Ex. Ho...

Counter bearing for milling machine from – bore 41.3 mm 22600

Counterholder, counter bearing, bearing block, pedestal bearing, bearing for milling machine

Counter bearing for milling machine from – bore 16/56 mm 11430

Counterholder, counter bearing, bearing block, pedestal bearing, bearing for milling machine -drawing at the photos

Mondiale Gallic 450 CNC (12.225C1)

• Manufacturer: Mondiale
• Model: Gallic 450CNC
• Spindle bore: 52 millimeter

Including: Manual 3 jaw chuck Lightning Safety Module EMC Multifix toolholder

Mondiale Gallic 420CNC (11.860C1)

• Manufacturer: Mondiale
• Spindle bore: 69 millimeter

6 Position-turret Coolant Kw: 11 | Volts: 400V | Cycles: 50 | R.p.m.: 45 - 2500 (inf.var.) | Control: Fanuc 10TF | Spindle bore (mm): 69 | Centre distance (mm): 870 | Max swing over bed (mm): 420 | Max swing over...