Used machine tools in Berlin, Germany

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 60.0 HSS New ! Diameter: Ø 60.0 mm | Cutting angle: 118° | Cutting fabric: HSS | Morse taper: MK5 | Overall length: 424 mm | A-measure: 266 mm | Span length: 232 mm | Dimensions ( packag...

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 61.0 HSS New ! Diameter: Ø 61.0 mm | Cutting angle: 118° | Cutting fabric: HSS | Morse taper: MK5 | Overall length: 430 mm | A-measure: 270 mm | Span length: 240 mm | Dimensions ( packag...

UNION TOOL Micro drill

• Manufacturer: Union

Micro drill, head drill, drill bit, 9 pieces UNION TOOL Type ST35 0.5 X 5 113-0050 Other quantities on request ! New !

UNION TOOL Micro drill

• Manufacturer: Union

Micro drills, head drills, drill bits, 10 pieces UNION TOOL Type ID30 3.8 X 10 112-0380 Other quantities on request ! New !

KENNAMETAL KTIP drill body

• Manufacturer: Kennametal

KTIP drill bit base body, holder for drilling/countersinking KENNAMETAL KTIP145R5SCF16M 2405281 Shank diameter: Ø 16 mm, shank length: 48 mm ( Weldon shank ) 3x drill bit modular KSEM/KTIP KTIP1450HPM Drill basic...

UNION TOOL Micro drill

• Manufacturer: Union

Micro drills, head drills, drill bits, 10 pieces UNION TOOL Type ID30C 5.2 X 10 112-8520 Other quantities on request ! New !

UNION TOOL Micro drill

• Manufacturer: Union

Micro drills, head drills, drill bits, 10 pieces UNION TOOL Type ST35 3.175 X 10 113-0317 Other quantities on request ! New !

AMEC spade drill holder

• Manufacturer: Amec

Spade drill bit holder, spade drill bit, drill bit, with straight shank, spiral fluted, 3 pieces AMEC, ALLIED MACHINE & ENGINEERING 1x 26010H-25FM Shank diameter: Ø 25 mm, shank length: 56 mm 1x 24025H-32FM Shank...

AMEC spade drill holder

• Manufacturer: Amec

Spade bit holder, spade bit, drill bit, with straight fluted cylindrical shank, 3 pieces AMEC, ALLIED MACHINE & ENGINEERING 1x 27000S-20FM Shank diameter: Ø 20 mm, shank length: 50 mm 1x 25030S-40FM Shank diamete...

KENNAMETAL KTIP drill body

• Manufacturer: Kennametal

KTIP drill bit base body, holder for drilling/countersinking KENNAMETAL KTIP160R5SCF20M 2405283 Shank diameter: Ø 20 mm, shank length: 50 mm ( Weldon shank ) New ! with documents !

SPITZNAS compressed air angle grinder

Pneumatic angle grinder with lever valve, pneumatic grinder SPITZNAS Type 1 2122 0010 5100 rpm with claw clutch used, tested ! Picture may differ !

AMEC spade drill cutting insert

• Manufacturer: Amec

Spade drill cutting insert, 10 pieces AMEC, ALLIED MACHINE & ENGINEERING 3x 452H-32 3x 450H-17.5 1x 450H-16 2x 152T-26-FB 1x 151T-24-FB New !

PAGUS machine base

• Manufacturer: Pagus

Machine foot, wedge foot, 2 pieces PAGUS used, tested !

PAGUS machine table

• Manufacturer: Pagus

Machine table PAGUS Base plate 250 x 270 mm Travel range 100 mm

PAGUS machine base

• Manufacturer: Pagus

Machine foot, 4 pieces PAGUS 250 x 165 x 380 Support surface: 250 x 165 mm, material thickness: 40 mm Centering holes: hole spacing: 195 mm, hole diameter: Ø 16.5 mm used, tested !