Used machine tools in Alberta, Canada

MODERN W1318S Horizontal Mitre Cutting Bandsaw

SPECIFICATIONS: - Capacity – Round @ 90° – 13 - – Rectangle @ 90° – 13H x 18W - – Round @ 45° – 11 - – Rectangle @ 45° – 13H x 11W - – Round @ 60° – 6.3 - – Rectangle @ 60° – 10 x 6.3 - Blade – 1.06 x 0.035 x 16...

HYD-MECH S-20A Automatic Scissor Style Band Saw

• Manufacturer: Hyd-Mech
• Model: S20A

Available to order. The S-20A, automatic scissor style band saw features a swing head design and provides exceptional miter cutting capability for light to medium duty applications. Its standard NC control is p...

MODERN UE-712-S HORIZONTAL MITRE CUTTING BANDSAW 7″ X 12″ CAPACITY

MODERN UE-712-S HORIZONTAL MITRE CUTTING BANDSAW 7″ X 12″ CAPACITY SPECIFICATIONS: • TYPE SWIVEL HEAD AND GEAR TRANSMISSION • MOTOR 1 HP • BLADE SPEED 39/66/82 MPM (86/145/180 FPM) • BLADE SIZE 19 X 3/4” X 9...

HYD-MECH VW-18 Semi Automatic Vertical Band Saw

• Manufacturer: Hyd-Mech
• Model: VW18

The VW-18 II is a semi-automatic vertical band saw with the ability to miter from 60° left to 60° right. This model is one of a kind in the Hyd-Mech line up with its saw head that can cut at 90° and be adjusted ...

MODERN UE-916A Horizontal Bandsaw

Horizontal 9″ x 16″ Metal Cutting Bandsaw SPECIFICATIONS: - Type: Manual, 4 Speed - Motor: 1-1/2 Horse-Power - Blade Speed: 25/40/51/71 MPM (82/132/170/235 FPM) - Blade Size: 27 x 0.9 x 3035 mm - Capacity: 90 –...

MODERN/LINMAC UE-250V Bandsaw (CSA Certified)

STANDARD FEATURES: - Heavy Duty Cast Iron Construction - Quick Acting Vise with 90 to 45 Degree Full Mitering - Blade Chip Brush - Safety Guards - Low Voltage Control with Overload Protection - Easy Clean Remova...

MODERN R-5035-H Hydraulic Plate Bending Roll

STANDARD FEATURES: • All 3 rolls hydraulic driven • Pinch roll cylinder adjustment synchronously • All rolls made of top grade alloy steel, hardened to HRC55 • Rigid construction for precise and smooth operat...

HYD-MECH V-18APC Automatic Vertical Band Saw

• Manufacturer: Hyd-Mech
• Model: V18APC

The V-18APC is an automatic vertical band saw with the ability to miter from 45° left to 45° right. The V-18APC is fast, with its high speed shuttle feed indexing up to 40″ in a single movement. A 2 HP driven hy...

RK MODEL RK-HFP 50T/12T H-FRAME HYDRAULIC PRESS

SPECIFICATIONS: - POWER 5 HP 3 PHASE 208V - BORE 8″ - STROKE MAIN RAM 12″ - STROKE 12T BROACH PRESS 20 - RAM SPEED SEC/INCH – RETURN 24 IPM - RAM SPEED SEC/INCH – PRESS 20 IPM - CAPACITY 50/12 TONS STANDARD FEA...

RK MODEL RK-HFP 100T/20T H-FRAME HYDRAULIC PRESS

SPECIFICATIONS: POWER 10 HP 3 PHASE BORE 8″ STROKE 12″ RAM SPEED SEC/INCH – RETURN 26 IPM RAM SPEED SEC/INCH – PRESS 20 IPM CAPACITY 100 TONS STANDARD FEATURES: ELECTRIC/HYDRAULIC OPERATION PROVIDES SMOOTH, CO...

MODERN TL-42

FEATURING FAGOR 8060 CONTROL SYSTEM WITH HD GRAPHICS, CONVERSATIONAL AND ISO-G CODE PROGRAMMING SPECIFICATIONS: • HYDRAULIC CHUCK 6 • SWING OVER BED 22.04 • SWING OVER CARRIAGE 8.26 • MAX TURNING DIAMETER 4.33 ...

Stihl TS 5410 Cutquik cut off

• Manufacturer: Stihl

Stihl TS 5410 Cutquik cut off- unit runs POWER SOURCE Gas WEIGHT 20.7 lbs. MAXIMUM CUTTING DEPTH 3.9 in. MAXIMUM WHEEL SIZE 12 in. MAXIMUM SPINDLE SPEED 5,350 rpm ARBOR SIZE .79 ENGINE SPEED 9,000 rpm ENGINE POWE...

Stanko IM63/3000

• Manufacturer: Stanko
• Model: IM63

Specifications: Swing Over Bed 27.5" Swing Over Cross Slide 13.7" Swing In Gap 35.5" Distance between Centers 120" Spindle Speeds 10 ‑ 1250 rpm Hole Through Spindle 4.13" Spindle Nose DIN11 Threads Per In...

MODERN X-5016E Power Slip Rolls

SPECIFICATIONS: - 50 max. sheet length - 16 ga. cap. mild steel - 3 roll diameter - 780 lbs approximate shipping weight - 1 HP, 1 Ph, 110/220 Volt, 60 Hz - c/w heavy floor stand FEATURES: - All rolls are made ...

HYD-MECH H-14A Automatic Horizontal Band Saw

• Manufacturer: Hyd-Mech
• Model: H14A

The H-14A is an automatic horizontal band saw providing accurate 90° metal cutting for medium to heavy-duty applications. The H-14A is fast, with its high speed shuttle feed indexing up to 34″ in a single moveme...