Used logging in British Columbia, Canada

84" Precision Chipper

• Manufacturer: Precision

- 1989 - Left hand - 84" - 6 knife - Horizontal in / top discharge - No motor - Log diameter up to 26"

BUSH CHIPPER 70" LEFT-HAND, 6 KNIFE

- Left hand - 70" - 6 knife - Horizontal in / bottom discharge - No motor - Log diameter up to 18" - Good condition

2019 CAT L4120 - L4120-254 Stacker

• Manufacturer: Caterpillar

2019 Wagner L42120 Log Stacker 5,041 hours Rebuild work completed at 14,500 hrs Transmission, Pumps and Cylinders Service history available

MPM Scanner System - Two (2) Systems

• Manufacturer: MPM

- Originally designed for log sorting - Two (2) Hermary Opto combination scanners - Two (2) scanner frames - Two (2) scanner interface panels - Two (2) computers - Two (2) PLC cabinets (Modicon) Not Included: - ...

72" Cut Off Saw - Shifting

- 72" chop saw c/w 75 HP drive motor, 460/3/60 - Shifting base assembly - Log clamp assembly - Missing support tower for chop saw - No saw blade

VK MODEL 600 SELF CENTERING INFEED CONVEYOR

- Model 450 (24") - Main support frame - Bottom "V" flight chain conveyor trough - Electric motor/reducer drive unit and spicer drive line shaft not included - Overhead holdown roll c/w crosslink assembly to mech...

Chip-N-Saw Canter Quad System

• Manufacturer: CAN CAR

Chip-N-Saw Canter Quad System consisting of:- - Double length infeed equipment was manufactured by Optimil in 1994 - Log turner assembly - Double length half taper infeed. 53' long from turner rolls to bottom he...

COMACT DDM6 PROFILING CANTERLINE

• Manufacturer: Comact

- Built in 2006 - 4" to 10" diameter logs, 8 feet long @ up to 650FPM - Comact Wave Feeder (9' - 6" between end walls) - V flight Infeed Conveyor c/w eletric drive - V flight scan chain c/w electric drive - Quad ...

Keystone Four (4) Saw Scragg

• Manufacturer: Keystone RV

- Infeed turning rolls for 8' to 16' long logs - Four (4) 48" diameter collared saws mounted on double keyed arbor (currently fixed but are moveable) - Front and rear guides - No arbor motors (single 150 HP motor...

VK 550 Combi 2R Debarker

• Manufacturer: VK

- Built in 1993 - Logs up to 55 cm (75 cm max butt diameter) - Feedspeed up to 120 m/min - Flare removing ring - Two (2) 550 mm debarking rings - Self centering infeed conveyor - Hydraulic power unit - Good worki...

Morbark / Hawker Dayton Post and Dowel Plant

• Manufacturer: Hawker

POST AND DOWEL PLANT EQUIPMENT LIST MERCHANDIZER SYSTEM consisting of:- - Infeed stem deck c/w three (3) strands of chainways c/w drive - Two (2) cutoff saw c/w air lift, hold down arm, infeed and outfeed hour...

96" PRECISION CHIPPER - EIGHT (8) KNIFE DISC CHIPPER

• Manufacturer: Precision

- Built in 1996 (only ran 7 months from new) - 27" maximum log diameter - Right Hand - Horizontal feed, bottom discharge - 96" - 8 knife with 8" thick disk - Belt driven by 1250HP 4160V motor (not included) - Sti...

60" CAE Carriage

• Manufacturer: CAE

- Manufactured approximately 1988 - 3 Knee c/w Sharpe linear positioners - Vee and flat wheels - Cant flippers - Overall knee width 21" (14" between the knee faces) - Two (2) accumulators - Frame is approximately...

LM Equipment Deck Saw

• Manufacturer: LM Equipment

The L-M Deck Cut Off Saws are used in all types of heavy duty applications, using 3/4" pitch or .404" pitch saw chain. These deck saws are a proven design and have been manufactured since 1957, with thousands in ...

Hoba Bandblade Slicer HSA-2

• Manufacturer: Hoba

Fully automatic slicer from Hoba for different types of bread to use in a semi or fully-automatic line. Continuously rotating band blades are cutting identical slices with every cut. The blades are from hardened...