Used logging in British Columbia, Canada

FASSI F65A.23

• Manufacturer: Fassi
• Model: F65A23
• Horsepower: 300 horsepower
• Capacity: 2,857.6295999999998 kilogram

2013 Ford F550 Picker 366,870 km Fassi F65 crane - Spec Sheet Last Picture or View in Service Logs 4x4 automatic Leather seats Steel deck Tool boxes Inspections will be updated before sale Located near Fort St Jo...

Morbark / Hawker Dayton Post and Dowel Plant

• Manufacturer: Hawker

POST AND DOWEL PLANT EQUIPMENT LIST MERCHANDIZER SYSTEM consisting of:- - Infeed stem deck c/w three (3) strands of chainways c/w drive - Two (2) cutoff saw c/w air lift, hold down arm, infeed and outfeed hour...

Keystone Four (4) Saw Scragg

• Manufacturer: Keystone RV

- Infeed turning rolls for 8' to 16' long logs - Four (4) 48" diameter collared saws mounted on double keyed arbor (currently fixed but are moveable) - Front and rear guides - No arbor motors (single 150 HP motor...

VK 550 Combi 2R Debarker

• Manufacturer: VK

- Built in 1993 - Logs up to 55 cm (75 cm max butt diameter) - Feedspeed up to 120 m/min - Flare removing ring - Two (2) 550 mm debarking rings - Self centering infeed conveyor - Hydraulic power unit - Good worki...

96" PRECISION CHIPPER - EIGHT (8) KNIFE DISC CHIPPER

• Manufacturer: Precision

- Built in 1996 (only ran 7 months from new) - 27" maximum log diameter - Right Hand - Horizontal feed, bottom discharge - 96" - 8 knife with 8" thick disk - Belt driven by 1250HP 4160V motor (not included) - Sti...

60" CAE Carriage

• Manufacturer: CAE

- Manufactured approximately 1988 - 3 Knee c/w Sharpe linear positioners - Vee and flat wheels - Cant flippers - Overall knee width 21" (14" between the knee faces) - Two (2) accumulators - Frame is approximately...

LM Equipment Deck Saw

• Manufacturer: LM Equipment

The L-M Deck Cut Off Saws are used in all types of heavy duty applications, using 3/4" pitch or .404" pitch saw chain. These deck saws are a proven design and have been manufactured since 1957, with thousands in ...

Hoba Bandblade Slicer HSA-2

• Manufacturer: Hoba

Fully automatic slicer from Hoba for different types of bread to use in a semi or fully-automatic line. Continuously rotating band blades are cutting identical slices with every cut. The blades are from hardened...

Sanborn MinMax 36" Bandmill Headrig

• Manufacturer: Sanborn

- Extended column 4000 pound air strain - Hydraulic strain and tilt motor - 8 knife saw path cleaner - Hoe type saw guides - 36" saw line capacity - 100 HP, 1775 RPM arbor motor, 460/3/60 - 20' IGUS 5050 cable ca...

2025 AGT Portable Sawmill

Model# YC-32G ENGINE: Zonsen 11KW MAX LOG DIAMETER: 32 Inch - Please check all fluid levels and bolts prior to operating! No Warranty is Supplied by Rhythm Auctions Ltd. - For More Information On This Item Contac...

1997 ECONOMIZER

• Manufacturer: ECONOMIZER

1997 ECONOMIZER WOOD PROCESSOR (07CS- 6510) - Built in 1997 - 3" to 10" diameter logs - 2"x 2" up to 6" x 6" cants - Economizer Four (4) sided canter c/w saw section (up to 3 saws) - Three (3) strand infeed ...

2025 AGT Portable Sawmill

Model# YC-26G ENGINE: Zonsen 11KW MAX LOG DIAMETER: 30 Inch BLADE SIZE: 144x0.94x0.04 Inch - Please check all fluid levels and bolts prior to operating! No Warranty is Supplied by Rhythm Auctions Ltd. - For More ...

20" Chip-N-Saw Line

- Infeed chain conveyor - Log turner - Single length infeed for 20' c/w holddown rolls and servo positioner for bed lift - 4 sided canter (bottom head (2 x 4 spline), side heads and top head c/w servo positioners...

44" NICHOLSON A2 RH AIR SEAL DEBARKER

• Manufacturer: Nicholson

- Built 1995 - Minimum log diameter is 4-1/2" - Five (5) Tool Air seal ring c/w remote tool tensioning - 100 HP, TEFC, 460 volt ring drive motor - Hydraulic ring centering - Fabricated main frame (appears in good...

COMACT DDM6 FOUR (4) SIDED CANTER SYSTEM

• Manufacturer: Comact

- Built in 1997 - 4" diameter to 12" diameter - 3", 4" and 6" cants - up to 450 FPM - DDM6 - Feedroll log turner - quad roll c/w positioning cylinders - One (1) pair of vertical and one (1) pair of horizontal inf...