Used internal threading machines

WMW facing and boring head

• Manufacturer: WMW

Facing and boring head WMW A 100 x 40 TGL 30-1201 internal thread: M16 x 2.0, depth: 45 mm used, tested !

POKOLM tool holder for screw-in milling cutter

• Manufacturer: POKOLM

Tool holder for screw-in milling cutter with thread, 3 pieces POKOLM 2x 75 10 750 100 10 750 SK 40 Thread M10 Conical design internal coolant supply used, tested ! Dimensions ( single tool holder ): 163 / 188 x Ø...

5 t load stand 4 pieces from RUD - VLBG 5 t M 30 34875

• Manufacturer: RUD

Load jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing ring, attachment point, load jack thread, lashing point -Manufacturer: RUD, load trestle with hinged swivel load bracket 4 pieces -...

PAGUS tool holders

• Manufacturer: Pagus

Tool holders, 23 pieces PAGUS SK50 7x holder for screw-in milling cutter internal thread: M16 x 2.0 7x cutter arbor, partly incomplete 4x surface chuck ( WELDON ): Diameter: Ø 16, 20, 25, 31 mm 1x collet chuck TG...

Haas EC 400 I Horizontal Machining Center I 2014

• Manufacturer: Haas
• Model: EC-400
• Spindle taper: SK 40

We hereby offer this used Haas EC 400 horizontal machining center from 2014, located in Czech Republic. This horizontal machining center is equipped with a reliable Haas control unit and offers a working area of ...

DKF grinding spindle

Grinding spindle DKF 1.8-4-4/3 TGL 4870 1x flat belt wheel: Ø 50 mm, length: 80 mm ( barrel-shaped ) 1x extended spindle shaft, diameter: Ø 28 mm, length: 125 mm with internal thread: M12 x 1.75 and guide bush, d...

DKF grinding spindle

Grinding spindle DKF 2.10-5/1 TGL 4870 1x external taper 1:6, diameter: Ø 38 mm, length: 54 mm with thread: M25 x 1.0 length: 12 mm 1x inner cone 1:10, diameter: Ø 32 mm used, tested !

DKF grinding spindle

Grinding spindle DKF 1.8-4-2/1 TGL 4870 1x flat belt wheel: Ø 50 mm, length: 80 mm ( barrel-shaped ) 1x extended spindle shaft, diameter: Ø 28 mm, length: 80 mm with internal thread: M12 x 1.75 and guide bush, di...

POKOLM tool holder for screw-in milling cutter

• Manufacturer: POKOLM

Tool holder for screw-in milling cutter with thread, 4 pieces POKOLM 2x 50 12 750 ZYL 75 12 750 ZYL 100 12 750 ZYL SK 40 Thread M12 Cylindrical design internal coolant supply used, tested ! Dimensions ( single to...

2000 FEHLMANN Picomax 60

• Manufacturer: Fehlmann
• Model: PICOMAX 60

This 3-axis FEHLMANN Picomax 60 vertical machining centre was manufactured in 2000. It features a drilling capacity in steel up to 25 mm, thread cutting up to M 24, and a milling capacity of 100 cm3/min. The spin...

WMW Tapping head

• Manufacturer: WMW

Tapping head WMW, WERKZEUGFABRIK ALTENBURG Shank ( machine side ): Ø 40 mm, length: 67 mm with adapter sleeve ( removable ): Ø 50 mm, length: 54 mm without thread cutting dies ! used, tested !

2002 FEHLMANN Picomax 90-M

• Manufacturer: Fehlmann
• Model: PICOMAX 90-M

This 3-axis FEHLMANN Picomax 90-M vertical machining centre was manufactured in 2002. It features a spindle speed range from 50 to 18,000 rpm, a table size of 920x380 mm, and a maximum workpiece weight of 250 kg....

WMW clamping drive

• Manufacturer: WMW

Clamping drive, clamping force generator, electric WMW EDU I160 Motor: KMR 71 K 2 E 0.75 kW 2800 rpm 220 / 380 V 3AC Mounting ring: Diameter ( inside / outside ): Ø 137.8 / 160 mm, width: 67 mm internal thread: M...

WMW Tapping head

• Manufacturer: WMW

Tapping head WMW, WERKZEUGFABRIK ALTENBURG Shank ( machine side ): Ø 40 mm, length: 67 mm 1x thread cutting die set M14 x 2,0 used, tested !