Used hardness block

Trusted Seller
John Deere 6081AT002 Diesel Engine 850C Dozer
- Manufacturer: John Deere
- Model: 6081
John Deere 6081AT002 diesel engine, turbocharged, aftercooled, mechanical fuel pump w/ electronic control, Deere reman, part # SE500859 long block, removed from an 850C Series II crawler dozer in strong running c...
$12,795 USD
Carbondale, PA
Trusted Seller
Waukesha F817G Gas Engine
- Manufacturer: Waukesha
- Model: F817
Waukesha F817G gas engine, 6 cylinder, F817, 817 cid, 1800 RPM governed speed, spec # G-23680, power unit w/ radiator, showing only 859 hours when removed. ENGINE HAS GOOD COMPRESSION, WAS NOT TEST RUN, NEEDS NE...
$3,295 USD
Carbondale, PA
Trusted Seller
Cummins NTC290 Industrial Big Cam Diesel Engine CPL 322
- Manufacturer: Cummins
- Model: NTC290
Cummins NTC290 diesel engine, turbocharged, aftercooled, CPL 322 (CPL 0322,) 290 HP rating, complete power unit w/ skid & radiator as pictured, 369.3 hours, runs EXCELLENT, see test run video. 855 Big Cam block,...
$10,795 USD
Carbondale, PA
Trusted Seller
10,000 lb Chambersburg model "L" Closed
- Manufacturer: Chambersburg CECO "L" Power Drop
Additional info: Minimum die bearing area: 800 Sq inches Minimum die striking area: 188 Sq inches Note: Minimum striking areas must be distributed evenly front-to-back and side-to-side. Data is predicated on usin...
Rockville Centre, NY
Trusted Seller
2000 John Deere 4045DF150
- Manufacturer: John Deere
- Model: 4045
1997 John Deere 4045DF150 diesel engine, mechanically injected, naturally aspirated, 80 HP at 2500 RPM rating, auxiliary drive w/ air compressor, removed from a compressor unit in STRONG running condition. Will i...
$4,795 USD
Carbondale, PA
Trusted Seller
John Deere 6068HT051 230LC Excavator Engine
- Manufacturer: John Deere
- Model: 6068
John Deere 6068HT051 diesel engine, fresh reman by non-OEM, built specifically for 230LC excavators, long block will interchange w/ 200LC, 230LCR excavators, 330B log loaders, and other John Deere applications. ...
$15,795 USD
Carbondale, PA
450T 60″X26″, 12″-14″ DAYLIGHT, 12″ STROKE, NEWMAN
- Manufacturer: Newman
MODEL HP 460-450. SERIAL #15095. CLEARANCE L TO R BETWEEN THE FRAMES IS APPROX 78” (APPROX 63” BETWEEN THE STOP BLOCKS). BOTTOM PLATEN ONLY HAS 3-ZONE ELECTRICALLY HEATED PLATEN THAT IS 1” THICK (PLUS 1” OF INSUL...
Grand Rapids, MI
Trusted Seller
Perkins 1104C-44TA Turbo Diesel Engine RJ51155 CAT 3054C
- Manufacturer: Perkins
- Model: 1104
Perkins 1104C-44TA diesel engine, turbocharged, air to air intercooled, 156 HP at 1800 RPM rating, build spec RJ51155, FULLY MECHANICAL FUEL SYSTEM, same as some CAT 3054C/T engines. ENGINE RUNS EXCELLENT ON STA...
$7,695 USD
Carbondale, PA
Trusted Seller
1979 Cummins NTC400 Diesel Engine BIG CAM 400 HP! CPL 0393
- Manufacturer: Cummins
- Model: NTC400
1979 Cummins NTC-400 Big Cam diesel engine, 855 block, BIG CAM series 1, CPL 0393 (CPL 393,) 400 HP rating, aftercooled, removed from an M916 military truck in STRONG running condition, LOW original miles on this...
$9,795 USD
Carbondale, PA
Trusted Seller
1973 Cummins PT270 Diesel Engine NT855 WITH JAKE BRAKES!
- Manufacturer: Cummins
1973 Cummins PT270 turbo diesel engine, NT855, 855 CID block, small cam, CPL 0113 (CPL 113,) 270 HP rating, jake brakes installed, framecut as pictured. GOOD RUNNING ENGINE, NO SMOKE OR BLOWBY NOTED DURING TEST ...
$3,795 USD
Carbondale, PA
Trusted Seller
John Deere 6466AT Diesel Engine 790D Excavator
- Manufacturer: John Deere
- Model: 6466
John Deere 6466AT diesel engine, 466 cubic inch displacement, turbocharged, aftercooled, mechanical pump. ENGINE IS A LOW HOUR REMAN, REMOVED FROM A 790D. WILL ALSO FIT 792 EXCAVATORS AND OTHER CONSTRUCTION & AG...
$7,695 USD
Carbondale, PA
Trusted Seller
2008 John Deere 4024HF285 Diesel Engine
- Manufacturer: John Deere
- Model: 4024HF285
2008 John Deere 4024HF285 diesel engine, turbocharged, electronic control, HF285 industrial spec, 80 HP at 1800 RPM rating, block code 4817. TEST RAN CLEAN, EXCELLENT RUNNER REMOVED FROM A GENSET, 50 PSI OIL PRE...
$6,795 USD
Carbondale, PA
Trusted Seller
2006 Caterpillar C13
- Manufacturer: Caterpillar
- Model: C13
- HP: 525 horsepower
- Fuel type: diesel
2006 Caterpillar C13 turbo diesel engine, removed in STRONG running condition from a W345C material handler. Engine serial # MHX01132, arrangement # 241-8344, core a/r 267-0009. Test ran clean, no smoke or blowby...
$15,595 USD
Carbondale, PA
Trusted Seller
2020 Haas ST-10 CNC Lathe W/ Barfeeder ()
- Manufacturer: Haas
- Model: ST-10
- Spindle bore: 58.419999999999995 millimeter
Imperial Metric Comes with Liners for 0.375"-1.5" - 1GB Onboard Memory - 30 Gallon integrated coolant tank with 3/4 HP Pump - 6000 RPM Spindle, 15HP, A2-5 Spindle Nose 1.75" Max bar capacity - Auto Door - 12 Stat...
Elk Grove Village, IL
Unused Parker 690PC 30HP AC Drive, 690PC/0220/400/0010/GR, 460V 3PH, In USA
- Manufacturer: Parker
This item is part of a large MRO surplus project. We do our best to accurately list items and take great photos so please review everything carefully. Unless otherwise stated the item in the photos is the exact i...
Savage, MN