Used fusing press

S-56 Feed Tables AFT & MFT

• Manufacturer: T-DRILL

Automatic Feed Table (AFT) and Manual Feed Table (MFT) Improves the manifold/collector production efficiency. AFT Adding the Automatic Feed Table to S-56 Improves the manifold/collector production efficiency. The...

SP-110 Tube End Spinner

• Manufacturer: T-DRILL

SP-110 Fully Automatic Tube End Spinner T-DRILL tube end spinner is a solution for closing, reducing and expanding copper tubes. Maximum reduction is 70%. The SP-110 is suitable for diameter 8–108 mm (5/16” – 4-1...

Track linear BE table fuse

• Manufacturer: Ersatzteile Siplace

F-400 Flanging Machine

• Manufacturer: T-DRILL

F-400 Flanging machine for both cold and hot forming With the T-DRILL F-400 Flanging machine lips and flanges are formed directly on the end of the pipe – a system that saves up to 40 % in time and costs compared...

S-56 FBH (Flying Branching Head)

• Manufacturer: T-DRILL

S-56 Collaring Machine for producing T-outlets on both straight and bent tubes The movable S-56 unit in FBH provides the best use of the floor space as tube stays still during the collaring process saving more th...

F-200 Flanging Machine

• Manufacturer: T-DRILL

F-200 Flanging Machine for both cold and hot forming With the T-DRILL F-200 flanging machine lips and flanges are formed directly on the end of the pipe – a system that saves up to 40 % in time and costs compared...

S-56 Collaring Machine

• Manufacturer: T-DRILL

S-56 Collaring Machine for producing T-outlets on both straight and bent tubes T-DRILL S-56 is a highly effective collaring machine for producing T-outlets for brazed and welded joints. The machine is designed fo...

T-850 Collaring Station

• Manufacturer: T-DRILL

T-850 Collaring Station Collaring by T-850 collaring machine is based on the patented T-DRILL-method. Both hot and cold forming procedures are possible. By cold forming it is possible to make collars in materials...

S-28 Collaring Machine

• Manufacturer: T-DRILL

S-28 Collaring Machine for bent tubes T-DRILL S-28 is a slim collaring machine that is designed especially for bent tubes with tight curves when collaring machine S-56 is not suitable. S-28 is equipped with the n...

T-115 Collaring Machine

• Manufacturer: T-DRILL

T-DRILL T-115 Transportable Collaring Machine The transportable T-115 Collaring Machine produces extruded outlets for branch connections directly on run tubes 33,7–323,9 mm (1’’–12’’) with branch tube diameter up...

TEC-220 Collaring Machine

• Manufacturer: T-DRILL

TEC-220 Collaring Machine for mechanically formed T-outlets up to SCH 40 pipes T-DRILL TEC-220 is a powerful Collaring machine for up to SCH 40 pipes. The TEC-220 forms mechanically extruded outlets directly on r...

T-115 Cu Collaring Machine

• Manufacturer: T-DRILL

T-115 Cu Collaring Machine The transportable T-115 Cu Collaring Machine fits perfectly e.g. for the needs of heat exchanger manufacturers. The machine produces extruded outlets for branch connections in copper tu...

TCC-28 Coil Tube Cutting Machine

• Manufacturer: T-DRILL
• Noise level: 80 dB

TCC-28 Automatic Tube Cutting Machine The TCC-28 is an automated tube cutting station with many options. Cutting range for copper and aluminium is 4.76 – 22 mm (0.06” –1.125”) and max. 10 mm (0.39”) for mild stee...