Used extruder in berugi

GEA/Niro/Aeromatic E140 Radical Basket Extruder

• Manufacturer: Niro

GEA/Niro/Aeromatic E140 Radical Basket Extruder - Stainless steel contact parts - NICA system control panel - Nominally rated 0.5-2 kg/minute capacity - 0.37 kw, 20-160 rpm feeder motor - 0.75 kw 20-140 rpm impel...

Jinhu 92MM Twin Screw Extruder

• Manufacturer: Jinhu

The Jinhu 92MM Twin Screw Extruder is a reliable used piece of industrial equipment designed for compounding applications, specifically for processing polyethylene (PE). It features a powerful 150 HP motor and op...

Bonnot Single Screw Extruder

• Manufacturer: Bonnot

Bonnot Single Screw Extruder Used Bonnot single screw extruder, model 2", stainless steel barrel and screw, with approximately 2" diameter X 10" long jacketed barrel with Pin and Grooving barrel, 6" x 4.5" feed t...

Extruder Screws

*quantity Of 2 Name: Extruder Screws | Arrival date: 10-21-2025 | Dimensions l x w x h (inches): 156 x 10 x 5 | Weight (lb.): 1110 | Available quantity: 1

10" Ventura Hydraulic Fab Horizontal Ram Extruder

• Manufacturer: Ventura Hydraulic Fabricators

10" Ventura Hydraulic Fab Horizontal Ram Extruder Used 10" Ventura Hydraulic Fabricators horizontal ram extruder, approximately 8" x 12" feed opening with screen changer, hydraulically operated less pump.

0.375" Randcastle Microtruder Extruder, Model RCP-0375

• Manufacturer: Randcastle

0.375" Randcastle Microtruder Extruder, Model RCP-0375 Used Randcastle RCP-0375 3/8" Single Screw ExtruderUsed .375" Randcastle Microtruder extruder, model RCP-0375, .375" diameter singled screw, 24:1 l/d, electr...

0.375" Randcastle Microtruder Extruder, Model RCP-0375

• Manufacturer: Randcastle

0.375" Randcastle Microtruder Extruder, Model RCP-0375 Used 0.375" Randcastle Microtruder extruder, model RCP-0375, .375" diameter singled screw, 24:1 l/d, electrically heated, air cooled barrel, jacketed feed se...

LCI Extruder, model MG-55

• Manufacturer: LCI Fuji Paudal

LCI Extruder, model MG-55 Used LCI Extruder, model MG-55, stainless steel construction, with controller, 1 hp motor, 230 volt, serial# 3511953, built 2006.

WLS GABLER Mirrored Extruder System

• Manufacturer: WLS - Gabler

WLS GABLER Mirrored Extruder System Used WLS Gabler Spheronizing Pelletizing line, dual extruders into single spheronizer, stainless steel product contact surfaces, with (2) TA800/2 �agitated twin discharge screw...

0.25" Brabender Extruder, 48:1 L/D

• Manufacturer: Brabender

0.25" Brabender Extruder, 48:1 L/D Used 0.25" Brabender extruder, electrically heated, air cooled barrel, 48:1 L/D, driven by 2 hp, 180 volt motor with VFD, controls on frame.

0.75" Brabender Extruder, 25:1 L/D, Model 2503

• Manufacturer: Brabender
• Model: 2503

0.75" Brabender Extruder, 25:1 L/D, Model 2503 Used 0.75" Brabender extruder, model 2503, 25:1 l/d, electrically heated, 3 barrel zones, 1 die zone, 3 hp motor, with control panel, 230 volt, serial# 1313.

4.5" NRM Extruder, 20:1 L/D, 150 HP

• Manufacturer: NRM

4.5" NRM Extruder, 20:1 L/D, 150 HP Used 4.5" NRM Pacemaker extruder, 20:1 L/D, electrically heated, air cooled, 150 HP DC motor with SCR, control panel with 4 barrel, 1 die zone with temperature controllers.

3.5" Davis Standard Cold Feed Rubber Extruder

• Manufacturer: Davis-Standard

3.5" Davis Standard Cold Feed Rubber Extruder Used 3.5" Davis Standard cold feed rubber extruder, model 35IN35, electrically heated, water cooled barrel, powered roller strip feeder section, Thermatic gearbox, 17...

1.25" Killion Extruder, 24:1 L/D, 5 HP with Bath

• Manufacturer: Killion

1.25" Killion Extruder, 24:1 L/D, 5 HP with Bath Used 1.25" Killion single screw extruder, 24:1 L/D, electrically heated, air cooled barrel, jacketed feed section, driven by 5 hp DC motor drive, on stand with co...

4.5" Davis Standard Extruder, 30:1 L/D, 150 HP

• Manufacturer: Davis-Standard

4.5" Davis Standard Extruder, 30:1 L/D, 150 HP Used 4.5" Davis Standard Thermatic extruder, model 45IN45HT, 30:1 L/D, air cooled barrel, jacketed feed section, vented barrel, gearbox rated 365 hp, 17.4:1 gearbox ...