Used exchangers in nyu-jirando

Pick Heaters Inc. Steam Injection Liquid Heater - Model 6X75-1

Shipping info: One skid, 75x45x25. Weight = 485 lbs.

Croll-reynolds Y-stage Steam Jet Ejector Set; Model 5y And 3y

• Manufacturer: Reynolds

S/n-78623-67003 (5-y), design press. 125 psig, body 15 psig/fv/300 deg. F, steam chest & noz. 140 psig/375 deg. F with croll-reynolds extractor air pump model 3y, s/n-79306-61555, press. 125 psig, body 15 psig/f...

Tranter UX-226HP-60 Superchanger Plate Heat Exchanger 234.1 Sq Ft SS Plates

• Manufacturer: Tranter

Used, in good clean condition. Pulled from a working environment. 234.1 sq ft surface area. MAWP-75 PSI @ 227 deg F. Stainless plates. 50" height x 16-1/2" wide plate dimensions. Number of plates, 60. 4" inlet/ou...

HEAT EXCHANGER 55 Sq. M

• Manufacturer: HEAT EXCHANGER

Used approximately 55 square meter stainless steel vertical shell and tube heat exchanger. Has (208) 20mm diameter X 4200mm long stainless steel tubes rated 6 bar/full vacuum design pressure at 150°C. Unit has ap...

Young Touchstone 8366328 Oil Cooler 3in

• Manufacturer: Young Touchstone

“New without Factory Packaging” Model number: 8366328 | Inlet size: 3 IN | Outlet size: 3 IN | Mpn: 8366328 | Shipping weight: 957 lbs | Shipping dimensions: 50.5 x 44.5 x 17 in | Reference sku: 1041566

GEA Ecoflex NT 100 X BC-10 Stainless Steel Plate Heat Exchanger

• Manufacturer: GEA

GEA Ecoflex NT 100 X BC-10 Stainless Steel Plate Heat Exchanger Test Pressure: Channel A 13 bar. Channel B 13 bar. Volumen: Channel A 257.33 L. Channel B 257.33 L. Maximum opening: 997 mm. Minimum opening: 983 mm...

STERLCO S238 EXCHANGER MODEL MX9412-A

• Manufacturer: Sterlco

ITEM 1315: STERLCO S238 EXCHANGER MODEL MX9412-A. SERIAL NUMBER 94A5180. 9000 WATTS PER HEATER. 460 VOLT, 3 PHASE, 60 HZ, 13 AMPS. SELLING AS IS.

IMI Rycroft SP104-B10 Supapac Plate Heat Exchanger 300kw 35GPM 38 Plate 6" ANSI

• Manufacturer: IMI Rycroft

Used Surplus, Acquired From Spare Parts Storeroom. This a 300kw unit. It says it does 200 Rate (m2/h). Not sure if this equals to 35 gpm. Has 6" ANSI flange 8 bolt pattern. 150 psi This has 38 different plates. I...

APV BAKER AS HEAT EXCHANGER #35

• Manufacturer: APV - Gaulin

APV Heat exchanger model 35. Ser# 38627 vintage 1994 All parts ordered before 3:30 pm (EST) typically ship same day via UPS, FedEx, or USPS! If the order is placed after 3:30 pm and you still would like it send ...

BLOCK HEAT EXCHANGER 50 Sq. Ft.

• Manufacturer: BLOCK HEAT EXCHANGER

Used approximately 50 square foot block graphite heat exchanger.

Vicarb Inc Heat Exchanger

• Manufacturer: Vicarb Inc

Used Vicarb Inc block heat exchanger.

2,500 Sq Ft Gea Ahlborn Plate Heat Exchanger, S/S, 87#

• Manufacturer: GEA

2,500 Sq Ft Gea Ahlborn Plate Heat Exchanger, S/S, 87# Used- GEA Ahlborn GMBH Varitherm Plate Heat Exchanger, Model VT20 L0CIN, Approximate 2,500 Square Feet, Stainless Steel. (356) Approximate 13" wide x 39" tal...

ITT Bell & Gossett GPX161-051 Plate Heat Exchanger 150 PSI 2" NPT 32"x 12"

• Manufacturer: Bell & Gossett

In Good Used Condition. Removed from a Working Environment. Model # GPX161-051. Mfg Date 1997. 32-1/4"L x 12-1/2"W Plate frame. 1-1/4" Plate thickness. 2" NPT Inlet/Outlet ports. 5" Plate pack width. Stainles...