Used exchangers in Utrecht, Netherlands

1994 Wilhelm Deller KG 27197/1

• Manufacturer: Wilhelm Deller KG

Water = 6barr / 208C / 19 L - Steam = 6barr / 208C / 36L - 46.5kW

1991 GEA Ahlborn VT 4

• Manufacturer: GEA

Plate heat exchanger, sanitary (PHE). Max working pressure: 6 bar. Beam length: 165 cm, connections: 4x2" Din. Current configuration: 1 Section: 50 plates. Connections follower: 2 up/2 down. Dimensions: 38x17,5x5...

Het Stempel BV N.N.

• Manufacturer: Het Stempel BV

Tubular heat exchanger, sanitary (THE). Monotube, 1 compartment, Straight design, 8 tubes, 1 section. Length inner tube: 302 cm, length outer tube: 288 cm. Outer diameter 76 mm, inner diameter: 48 mm. Connectio...

1995 Tetra Pak Spiraflow TTF-38s/16c-3-1

• Manufacturer: Tetra Pak
• Model: TTF38

Monotube, outer diameter 38 mm (smouth) and inner diameter 16 mm (coagurated). 6 Tubes of 3 meter. Product side: pressure up to 60 bar - temperature up to 160 °C - volume: 1 liter per tube, total volume 6x 1 = 6 ...

1959 Stork DS

• Manufacturer: Stork

Stork DS Pre-sterilizer no: 13384 Capaciteit: 2000 liters per hour

1995 Alfa Laval CLIP10-RM

• Manufacturer: Alfa-Laval

Pressure: 10 bar. Current configuration: 1 Section. Connections: head: 2 up, follower 2 up.

N.N. Monotube

• Manufacturer: N.N.

Monotube. 1 Tube with internal spiral. Length: 150 cm, outside diameter 70 mm, inside diameter 50 mm. Connections, product: DN50 Clamp and service: DN16, DIN.

Tetra Pak Multitube

• Manufacturer: Tetra Pak

Tube heat exchanger, straight design multitube, length: 6mtr, 7 inner tubes with diameter 22 mm, outer tube coagurated. Outer tube diameter 113 mm. Capacity: 0,41 m2x7=2,9m2. With connections product in/out DN 80...

2012 Alfa Laval Front 8 RM

• Manufacturer: Alfa-Laval

Plate heat exchanger, sanitary (PHE). Pressure: 10,0 bar - Beam length: 180 cm, connections: 8 x 3" DIN. Current configuration: 3 Sections: 37-48-36 plates (total 121) - Connections head: 1 up and 2 down, followe...

Stork DS 1525

• Manufacturer: Stork

Tubular flow sterilizer, Temperature cycles: 10-90-130/145-30-60 degrees Celcius. Including: pump, balance tank, temperature indicators. With indirect heating with steam and manual temperature control.

2005 APV Crepaco SSHE

• Manufacturer: Crepaco

Scraped heater - cooler set, used as sterilizer, including 3 holding tubes 30 - 30 - 210 seconds (various options possible on swingbend panel). Each scraped heaterexchanger has a temperature indicator on water an...

1998 Alfa Laval CLIP 8-RM

• Manufacturer: Alfa-Laval
• Model: CLIP 8-RM

Pressure: 7 bar. Beam length: 1800 mm. Connections: SMS. Current configuration: 1 Section: 164 plates - Connections head: 2 up, follower 1 down. Weight total: 1.718 kg.

1989 Crepaco 1HRT-672

• Manufacturer: Crepaco

Scraped surface heatexchanger with 1 product cylinder, in stainless steel, tube diameter: 165 mm, length 1,830 mm. Rotor with 4 scrapers. Surface per tube 0,84 m² and volume per tube 40 ltr. Pressure: 150 psi (10...

Tubular Heatexchanger

Monotube, inner diameter (product) 23mm outer diameter (water) 40mm, 42 tubes x 3 mtr each. total dimensions: Length 3.00 mtr x Width 1.30 m, Height 1.50 mtr. On a stainless steel frame. Flexible in using, many l...

APV 3HD672

• Manufacturer: APV - Gaulin

Scrape surface heatexchanger. 2 product cylinders. Tube Ø 150 mm. Surface per tube 0,84 m². 1x Main motor which drive both dashers. Previous used on heating media: steam. Pressure product side: 12 bar. Pressure s...