Used electric&controller&monitor in Czech Republic

2020 Sand blasting equipment

• Manufacturer: eVirgo
• Noise level: 80 decibel

IP67 5000 lm -40 °C to 55 °C Accessories 5 pcs ceramic nozzles (3 × 6 mm 2 × 7 mm) 1 pc sandblasting gun (industrial type) 2 pcs protective films for viewing window 1 pc cyclone tank (dust collector) 1 pc foot ...

Morbidelli Author 430 S I CNC Machining Center I 2005

• Manufacturer: Morbidelli
• Model: Author 430

Discover this used Morbidelli Author 430 S CNC machining center from 2005, located in the Czech Republic. Crafted for precision, this industrial powerhouse boasts a substantial working area measuring 3050 x 1385 ...

2009 Exeron EDM 310

• Manufacturer: Exeron
• Model: 310

Table dimensions: 350 x 550 mm | Maximum travel length x-axis: 310 mm | Maximum travel length y-axis: 270 mm | Maximum travel length z-axis: 270 mm | Maximum table load: 500 kg | Maximum electrode weight: 25 kg ...

2000 HITACHI 203 F2

• Manufacturer: Hitachi

Control system: MARK-10W | Maximum travel length x-axis: 320 mm | Maximum travel length y-axis: 250 mm | Maximum travel length z-axis: 170 mm | Travel length u-axis ( -): 20 mm | Travel length v-axis ( -): 20 ...

2017 Engel E-Duo 740H-740L-700 combi

• Manufacturer: Engel

This Engel E-Duo 740H-740L-700 combi was manufactured in 2017. A robust hydraulic injection moulding machine, it features a system size of 8.5 m x 2.5 m x 2.5 m and a total weight of approximately 20,000 kg. It i...

2010 ABB IRB 1600

• Manufacturer: ABB
• Model: IRB1600
• Load capacity: 30.5 kilogram

This 6-axis ABB IRB 1600 robot arm was manufactured in 2010. It features versatile mounting options including floor, wall, and inverted setups, and is compatible with IRC5 and OmniCore controllers. With a maximum...

2022 HAAS ST-30Y

• Manufacturer: Haas
• Model: ST-30Y
• Spindle bore: 88.89999999999999 millimeter

This 3-axis HAAS ST-30Y horizontal turning machine was manufactured in 2022. It features a 10-inch chuck, a maximum cutting diameter of 13.75 inches, and a cutting length of 32.5 inches. The machine includes a 12...

2002 Quaser MV 204 IIU/10

• Manufacturer: Quaser
• Model: MV204
• Spindle taper: BT 40

This 5-axis Quaser MV 204 IIU/10 vertical machining centre was manufactured in 2002. It features a tilting spindle head with a range of ±110°, a spindle speed of 10,000 rpm, and a spindle motor power of 15/33 kW....

Narrow Aisle - FlexiG4AC - Forklift Trucks - 2011

Type: Electric forklift Drive: Battery powered Operating hours: 14,945 h Load capacity: 2000kg Lifting device: Triplex mast with free lift Lifting height: 5010mm Features: Side shift, non-marking tires Battery: I...

TOS Hulín SKJ 12 CNC

• Manufacturer: Toshulin
• Model: SKJ 12 CNC

The SKJ 12 CNC carousel is in good technical condition. Control system Sinumeric 840D. According to the agreement, it is possible to see the machine connected until 30.9.2024. Machine modernization: - electrical ...

2018 Lucas 40T

• Manufacturer: Lucas
• Model: 40T
• Spindle bore: 130 millimeter

Air-conditioned Electric Switchboard UL Rated Components for Electrical Cabinet and Wiring Automatic Box Way Oil Lubrication Hydraulic Unit Cooling Aggregate for Thermal Stabilization of Spindle Bearings and gear...

2006 AGIE AGIETRON HYPERSPARK

• Manufacturer: Agie - Charmilles
• Model: Agietron

Equipment: Clamping magnet 3x electrode holder Cooling device Dielectric 8x dielectric filter Clamping head Erowa

1972 TOS SKJ 8

• Manufacturer: TOS
• Model: SKJ 8

Machine dimensions: 2600x2500x3700 mm Electric table clamping Electric rotation of the tool head Copying from template Two-axis measurement Ball screws Suitable for CNC conversion Accessories: Clamping pressure g...

VSS LE 250 C

• Manufacturer: VSS Košice
• Model: LE 250 C

GO: Mechanics and electrical switchboards Pressing force: 250 t | Length of the table: 1120 mm | Width of the table: 800 mm | Ram stroke: 30 mm | Adjusting the ram: 110 mm | Machine weight: 13000 kg

2008 HS MS 48 Sp

• Manufacturer: HS

Equipment: Electrical switchboard with control Maximum width of the sheet metal: 1000 mm | Maximum sheet weight: 1300 kg | Diameter of roll: 148-156 mm | Coil: 1020 mm | Weight: 700 kg