Used dia in Romania

1980 TOSHIBA GEAR HOBBER 6000MM DIA.

• Manufacturer: Toshiba

The machine is little used. The machine is not operated for more than 10 years and need oil refilling and elentrical control revision before operating Specifications · Max. dia. of gear to be hobbed 6000mm ( w...

1976 Heavy Duty Lathe WOHLENBERG 1100X18000 retrofitted

• Manufacturer: Wohlenberg

Heavy duty lathe VDF WOHLENBERG 1000x18000mm Made in Germany YOM 1976 Main technical data: Faceplate dia. 1120mm Center height from the bed 500mm Weight ab. 65ton Equipped with 11 steady rest and grinding attachm...

1977 Gear hobbing machine SHIBAURA HHA600B (S)

• Manufacturer: Shibaura

Main technical data: Center distance between hob and table spindle: 3270mm (max ) 680mm (min) Vertical travel of lifting saddle 2000mm Center hole of table 1000mm Dia. of the master worm wheel 4100mm Hob spindle ...

1970 Gear hobbing machine MODUL ZFWZ 6300x40/1

• Manufacturer: WMW-MODUL
• Gear width: 1,500 mm
• Wheel diameter: 7,100 mm

equipped with: normal hobbing head, tangential hobbing head, internal milling head, change gears, supports. Do not hesitate to contact us for any other information.

1970 WMW-MODUL ZFWZ 6300x40/1

• Manufacturer: WMW
• Model: ZFWZ
• Gear width: 1,500 mm
• Wheel diameter: 7,100 mm

YOM ab. 1970 Located in ROMANIA Gear hobbing machine ZFWZ 6300x40/1 equipped with; normal hobbing head, tangential hobbing head, internal milling head, change gears, supports For more information please contact u...

1600 tonne WEAN UNITED EXTRUSION PRESS FOR STEEL

• Manufacturer: Wean

Billet dia: 95 to 1800 mm | Billet lengts: 250 to 700 mm | Piston stroke: 1900 mm | Container stroke: 380mm | Nominal capacity: 1600 ton | Max extrusion speed: 200mm/sec | Max. hydraulic pressure: 315 bar

MODUL ZFWZ 6300 GEAR HOBBER X40/1

• Manufacturer: GERMANY WMW- MODUL
• Gear width: 1,500 mm
• Power requirement: 47 kW

In working condition. Gear width: 1500 mm | Max. modul: 40 | Hob diameter: 500 mm | Equipped with: normal hobbing head, tangential hobbing head, internal milling head, change gears, div. tooling | Table diameter:...

CONSARC 650 Kg VACUUM REMELTING FURNACE

• Manufacturer: CONSARC

The furnace was completely rebuilt by CONSARC using the steel structure of an used furnace CONSARC REBUILT VAR FURNACE Max weight of ingot : 650Kg Ingot dimensions:dia220mmx1400mm; dia380mmx1400mm Max vacuum ...

1981 WMW ZFWZ 6300/40 I

• Manufacturer: WMW
• Model: ZFWZ

Good gear mill ZFWZ 6300/40I,dia 6300mm, module 40 2020 REVISED

270 MM BAR PEELING MACHINE

• Manufacturer: Romania

original installation, little used. Peeling dia 100-270mm Bar length 3.4 to 12m Feeding speed of the bar 3.4m/min

100 MM RADIAL DRILLING MACHINE

• Manufacturer: Romania

Max. drilling dia. 100 mm Main spindle taper MORSE 6 Spindle travel 400 mm Travel on the base 2000 mm Main spindle rotations 16-1120 rpm Main spindle feeding speed o.o45 – 1.5 mm/rot Main motor power 11KW Weight ...

CRANKSHAFT GRINDING MACHINE KARATSU 7000X1400

• Manufacturer: KARATSU, JAPAN

KARATSU RG-BAC KRANKSHAFT GRINDER Main Specification Distance between centers ……………………………. 7000mm Swing over bed , diameter ……………………….….. 1400mm Support diameter with chucks …………………..…….700mm Off set of chuc...

Alta Plug with 2 braids, Model DIA6

We are registered in the RABLA program for tractors and equipment. We are present on AFIR and SEAP. We offer consulting for obtaining European Funds. The company DELTATEH is the sole importer of SOLIS tractors an...