Building Filters
1987 GSW SCHWABE LHM 80/650
- Manufacturer: Herman-Schwabe
motorized reel Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Sheet width: 150 mm | Coil weight: 80 kg | Outer coil diameter: 650 mm | Thorn height: 1000 mm | Expansion area: ...
Schmölln, Germany
ZEULENRODA PYE 10 S S
- Manufacturer: Zeulenroda
- Model: PYE 10
- without clamping plate - only approved for work with closed tools
Schmölln, Germany
1982 ZEULENRODA PED 63/3
- Manufacturer: Zeulenroda
The following work is to be carried out on the machine / Partial overhaul: - Machine is completely dismantled, checked - Machine is repainted - New press safety valve - New separate control cabinet with touch pan...
Schmölln, Germany
2025 IWK PEKRD 125
- Manufacturer: ambold pressen- und maschinenbau
- Stroke length: 400 millimeter
– The machine has been partially overhauled – It has been completely disassembled and technically inspected – New seals – New pneumatic coupling – New seals in the compensating cylinder – New drive motor – New ba...
Schmölln, Germany
ZEULENRODA PED 63/2
- Manufacturer: Zeulenroda
The following work is to be carried out on the machine / Partial overhaul: - Machine is dismantled, checked - Machine is repainted - New lubrication unit Vogel - New cam switch unit - New control cabinet with tou...
Schmölln, Germany
PME type Servo 400
- Manufacturer: PME
overview strip width from 200 mm to 2000 mm strip thickness from 0.4 to 9 mm strip cross section up to 3200 qmm intermediate aeration feed height adjustment precision ground special steel rollers and additional h...
Erfurt, Germany
1977 SMERAL LENP 40 A
- Manufacturer: Šmeral Brno
- Model: LENP 40 A
- gear train - tiltable - table platen - mechan. Overload protection in the ram (break plate) - pneum. clutch
Schmölln, Germany
WV 360
- Manufacturer: wimmer - umformtechnik
overview strip width from 200 mm to 2000 mm strip thickness from 0.4 to 9 mm strip cross section up to 3200 qmm intermediate aeration feed height adjustment precision ground special steel rollers and additional h...
Erfurt, Germany
WANZKE GMD I
- Manufacturer: ambold pressen- und maschinenbau
- Motorized double-turn reel - newly painted Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Coil weight: 2 x 0.15 t | Span area: 265 - 485 mm | Bandwidth: 200 mm | Tape streng...
Schmölln, Germany
1958 RICHTER PED 160
- Manufacturer: ambold pressen- und maschinenbau
2003 Modernization / Retrofitting The following work is still to be carried out on the machine: - new control cabinet with ABB SPS - separate two-hand control input with foot switch - Vogel loss lubrication
Schmölln, Germany
AMBOLD JH25 – 200
- Manufacturer: ambold
- pneumatic clutch - press safety valve, Herion - cam controller, Balluff - chain breakage monitoring - hydr. overload, HYDAC - motor. Ram adjustment with digital display - separate control cabinet with safety co...
Schmölln, Germany
BAD SALZUNGEN MR 250/4
- Manufacturer: BAD SALZUNGEN
Straightener was disassembled, inspected and then repainted
Schmölln, Germany
2023 HELMERDING ERVL 50 B
- Manufacturer: HELMERDING
Machine was partially overhauled in our company as follows: - Disassembly, cleaning and inspection - Table milled over - New painting of the machine in light gray / gentian blue, ram assembly in orange - Shaft cr...
Schmölln, Germany
BAD SALZUNGEN MHD 250/4
- Manufacturer: ambold pressen- und maschinenbau
unbraked reel with pressure roller new painted Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Sheet width: 250 mm | Coil weight: 2.5 t | Inner coil diameter: 450 - 530 mm | Sh...
Schmölln, Germany
AMBOLD PEEV 25.4
- Manufacturer: ambold pressen- und maschinenbau
- Ortlinghaus hydraulic clutch-brake combination - Central lubrication bird - Balluff cam switch - Height adjustable table - Control cabinet with touchscreen - foot switch
Schmölln, Germany