Used controllers in Switzerland

Trusted Seller
2003 PEMAMO MDR 140 NC
- Manufacturer: PEMAMO
Min. diameter: 1.5 mm | Max. diameter: 50 mm | Max. honing length: 120 mm | Table load max.: 20 kg | From: 0 c/min | Up to: 20 c/min | Total stroke: 0 - 100 mm | Voltage 50 hz 3x: 400 Volt | Spindle motor: 1.5 k...
Brügg, Switzerland
Trusted Seller
CYLINDRICAL GRINDING MACHINE STUDER S31 CNC
- Manufacturer: Studer
- Model: S31
Year 2003 – Fanuc 16i-T – completely overhauled centres height 175 mm., between centres 650 mm 2x external + B axis fine Inventory no. 2220103 including : STUDER S31 CNC, Nr. 055 – 030.0221 Fully overhauled: Mech...
Biel/Bienne, Switzerland
Auction
2007 Studer S242 CNC cylindrical grinding machine
- Manufacturer: Studer
Power on hours: 65389 | X/z-axis travel: 220/1500mm | Tool type: VDI 30 | Amount of tool places (driven): 12 (12) | Amount of grinding weels: 2 1x0° 1x25° | Griding weel size: 400mm | Grinding speed: 50 m/s | Co...
Rümlang, Switzerland
Visit Auction Website
Trusted Seller
CNC TURNING MACHINE BENZINGER TNI-B10
Year mfg. 2013 Inventory no.2250051, machine equipped with : Y-axis on top turret 16-station turret Counter spindle 8000 min-1 Manufacturing origin Germany Voltage 400V/50Hz/3ph Netweight abt.4500 kg Custom ...
Biel/Bienne, Switzerland
Trusted Seller
CNC TURNING MACHINE BENZINGER TNI-B10
Year 2012 Inventory no.2322002, machine equipped with : Y-axis on top turret 16-station turret Counter spindle 8000 min-1 Manufacturing origin Germany Voltage 400V/50Hz/3ph Netweight abt.4500 kg Custom posit...
Biel/Bienne, Switzerland
Trusted Seller
VERTICAL MACHINING CENTER “SCHAUBLIN” TYPE 100-CNC
- Manufacturer: Schaublin
- Model: 100CNC
Year of manufacture 2001 Fanuc O-MD 20-tool changer Chip conveyor Spindle hours 1,374 Spindle overhauled Inventory no 23180123 consisting of : – 1 collet holder ESX-25 ISO 40 with collet Ø 8 mm – 1 do ESX-32 ISO ...
Biel/Bienne, Switzerland
Trusted Seller
COLUMN DRILLING “CINCINNATI” TYPE NC 320 TR
- Manufacturer: Cincinnati
Rectangular table TR – 5 Spindle speeds Weight: 270 kg
Biel/Bienne, Switzerland
Trusted Seller
CNC SHARPENING MACHINE SCHNEEBERGER TYPE GEMINI DMR
- Manufacturer: Schneeberger
Fanuc Oi-MB – spindle HSK50 – 50-10'000 min-1 Partially rebuilt and in good working condition 2. Check all sensors and sensor cables. – 18 sensor cables have been replaced. – All sensor cables that were too long ...
Biel/Bienne, Switzerland
Auction
(C-1011) 2003 Deckel Maho DMU 80T CNC machining center
- Manufacturer: Deckel / Maho
- Model: DMU 80 T
Approximate Dimensions (L x W x H): 3950 mm x 2900 mm x 2500 mm Note! without lot 123 (Heidenhain probe)
Rümlang, Switzerland
Visit Auction Website
Auction
1990 Ixion TL600 CNC 3 CNC Deep Hole Drilling Machine
- Manufacturer: Ixion
Movement X-axis 1000 mm, Movement Y-axis 600 mm, drilling depth Z-axis maximum 600 mm (maximum 1200 mm from both sides), control "Bosch Type CC 100", including accessories 3 pieces of ISO-40 mounts for deep hole ...
Wängi, Switzerland
Visit Auction Website
Trusted Seller
CENTERLESS GRINDER “TSCHUDIN” ECOLINE 400 CNC
- Manufacturer: Tschudin
- Grinding length: 270 millimeter
Fanuc 21i-MBf – Dr. Kaiser dressing spindle, overhauled 2017 Year 2006 Manufacturing origin CH Voltage 3x400V – 24(V – DC) Netweight 5500 kg Dimensions 237x206x195 cm Control Fanuc 21i-MB Through feed grin...
Biel/Bienne, Switzerland
Trusted Seller
2006 WIDOS 2500 S CNC 3.0
- Manufacturer: WIDOS
Power of the heating: 4 kW | Welding diameter: 20 - 90 mm | Voltage 50 hz 3x: 400 Volt | Machine's weight about: 347 kg | Length: 1400 mm | Width: 1300 mm | Height: 1400 mm
Brügg, Switzerland
Trusted Seller
2006 AGIE CHARMILLES HD 30 CNC
- Manufacturer: Agie - Charmilles
- Model: HD30
Brügg, Switzerland
Auction
2009 Ibarmia ZV45/L3000 Vertical CNC Machining Center with Additional 4-Axis
- Manufacturer: Ibarmia
- Model: ZV 45
Grid plate with 50 mm spacing, tool changer with 52 positions, with measuring system "Renishaw with 3-D probe type RMP 60" and tool breakage detection, including clamping longitudinal beam with 50 mm grids for di...
Wängi, Switzerland
Visit Auction Website
Trusted Seller
COLUMN DRILLING “CINCINNATI” TYPE NC 320 TR 10V
- Manufacturer: Cincinnati
Rectangular table TR – 10 Spindle speeds Weight: 270 kg
Biel/Bienne, Switzerland
Star SA-12 CNC Lathe
- Manufacturer: Star
- Model: SA-12
Good condition Star SA-12 CNC Lathes available between 1997 and 1999 years. Located in Switzerland and other countries. Click request price for more information.
Switzerland