Building Filters
- Trusted Seller
![Mixing tanks [3 pcs.]](https://i.machinio.com/thumb/721fcf379b7f096ccc72ff5be51e6436/original_compressed-209322HN_1/ddf6/mixing-tanks-3-pcs.jpg)
Mixing tanks [3 pcs.]
- Manufacturer: Ullmann
Complete mixing tank system with 3 tanks, pipe fence, pumps, fittings and automatic gassing.
Freising, Germany - Trusted Seller

KEG filling line
- Manufacturer: ATS Wibbing
Semi-automatic KEG system with two stations. Additional title: Keg cleaning and filling system | Capacity: 30 KEG/h | Power: 6 kW | Current: max. 15,0 A | Voltage: 400V AC | Formats: 10 L, 15 L, 20 L, 30 L, 50 L ...
Freising, Germany - Trusted Seller

Loader and unloader for salt bath cheese trays
Power: 17 kW | Voltage: 400 V | Frequency: 50 Hz | Compressed air: 6 bar, approx. 900 Nl/min | Operation / control: Siemens S7, control voltage 24 V DC, 50 Hz | Features: Loading unit, unloading unit, Frame conv...
Freising, Germany - Trusted Seller

Automatic ventilation unit
- Manufacturer: vbw-weihenstephan
The ventilation system was used to extract kitchen exhaust air. The system is weatherproof and can therefore also be installed outdoors.
Freising, Germany - Trusted Seller
![Mixing tanks [3 pcs.]](https://i.machinio.com/thumb/721fcf379b7f096ccc72ff5be51e6436/original_compressed-209322HN_1/ddf6/mixing-tanks-3-pcs.jpg)
Mixing tanks [3 pcs.]
- Manufacturer: Ullmann
Complete mixing tank system with 3 tanks, pipe fence, pumps, fittings and automatic gassing.
Freising, Germany - Trusted Seller

KEG plant
- Manufacturer: Alfred Gruber
KEG Filling Plant Additional title: Semi-automatic keg filling system | Performance approx.: 50 KEG/h | Power: 2,5 kW | Voltage: 230 V | Frequency: 50 - 60 Hz | Heating / cooling: steam 1.5 - 2 bar, < 125°C | Wat...
Freising, Germany 
Through-Feed Drill Glue Dowel Machine _ GANNOMAT Spectrum
- Manufacturer: Gannomat
Multi-spindle thrufeed bore and dowel insertion machine in the of System 32 mm through multi spindle drillhead and adjustable doweling stations. Short introduction: • Double sided boring and dowel inserter with ...
Austria- Trusted Seller

lactic acid plant
Manual operating biological lactic acid plant with 3 tanks in stainless steel as storage and dosing tanks, with all fittings
Freising, Germany 
1998 Kilia 50 Liter
- Manufacturer: Kilia
2x blade shaft speed 2x mixing, forward and reverse 2x bowl speed incl. 6-blade cutter head incl. 18 four-cut cutter blades
Laberweinting, Germany- Trusted Seller

ultrasonic bath
- Manufacturer: Skymen
Additional title: ultrasonic cleaner | Material: stainless steel | Features: removable lid, control panel
Freising, Germany - Trusted Seller

PVPP filtration plant
- Manufacturer: SEN
PVPP filter for beer filtration. The system is sterilised by filling the dosing tank with hot water and flushing it with the PVPP tank in a circuit. Finally, the system is rinsed with cold water. After filtration...
Freising, Germany - Trusted Seller

water treatment plant
- Manufacturer: Suez WTS / Veolia
Water treatment system for water softening consisting of: Cation exchanger, exchanges Mg and Ca for sodium ions before reverse osmosis system: Capacity: 1.2 - 12.0 m³/h Reverse osmosis system: - Output: 5 m³/h ...
Freising, Germany - Trusted Seller

Pressure boosting station with hygiene center
- Manufacturer: Jürgen Löhrke GmbH
Additional title: Booster station with chemical dosing pumps | Position: standing on frame with protective screen | Features: Centrifugal pump (Grundfos), 1 pressure sensor, 4 diaphragm metering pumps with PVDF ...
Freising, Germany - Trusted Seller

Filling line for glass bottles
- Manufacturer: Krones
Bottling line with a capacity of 30,000 bottles per hour. It uses 0.33 litre Vichy, 0.33 litre Euro, 0.35 litre lemonade and 0.5 litre NRW non-returnable and returnable bottles. It is also possible to pack 6-car...
Freising, Germany - Trusted Seller
2010 SCM SI 400 EP Nova
- Manufacturer: SCM / SCMI
- Model: SI400EP
Sled length: 3200 mm | Cutting width at the rip fence: 1250 mm | Cutting width at the crosscut fence: 3200 mm | Cutting depth: 150 mm | Scoring: Yes | Height adjustment saw blade: electric / position control | S...
Egenhofen, Germany 
Index MS40 CNC Lathe
- Manufacturer: Index
- Model: MS40
Good condition Index MS40 CNC Lathes manufactured in 2011. Located in Germany and other countries. Click request price for more information.
Germany
