Used controllers in Bern, Switzerland

(C-1006) 2019 Spinner PD 42-S-V4 CNC lathe

• Manufacturer: Spinner

Power on hours: 9526 mist separator Fire: Spinner

2000 TORNOS DECO 2000/13

• Manufacturer: Tornos
• Model: Deco 2000

Main spindle Counter-spindle Guide bush holder 1 Guide bush holder 2 End attachment Secondary operation Power supply Machine hours Rotating guide bush Parts catcher Ejection of workpiece Coolant tank

2004 SCHAUBLIN 60 CNC

• Manufacturer: Schaublin
• Model: 60CNC

With cnc continuous path control: SIEMENS | With nc dividing head. model: 810D Shopmill | With nc dividing head. for axes: 4 | X axis longitudinal travel: 600 mm | Y axis cross travel: 510 mm | Z axis vertikal t...

VOUMARD 3 CNC

• Manufacturer: Voumard

Control: NUM | Min. grinding diameter: 3 mm | Max. grinding diameter: 50 mm | Centre height: 200 mm | Longitudinal travel (z-axis): 300 mm | Cross travel (x-axis): 90 mm | Swivelling range: -5 / 60 ° | From: 550...

2007 INDEX G 200 Ref No: 52086

• Manufacturer: Index
• Model: G200
• Spindle bore: 60 millimeter

Accessories - Chip conveyor - Iemca Master 880MP bar feeder

2000 INDEX G 300 Ref No: 47363

• Manufacturer: Index
• Model: G300
• Spindle bore: 90 millimeter

Object: 47363 | Controls: INDEX C200-4 | Design principle: inclined bed | Number of spindles: 2 | Number of x/z slides: 2 | Number of turrets: 2 | Live positions: yes | Number of c-axes: 2 | Number of y-axes: 1 ...

2016 OKUMA MULTUS U4000 Ref No: 51703

• Manufacturer: Okuma
• Model: Multus U4000
• Spindle bore: 112 millimeter

Object: 51703 | Controls: OKUMA OSP P300S | Number of spindles: 2 | Number of turrets: 1 | Live positions: yes | Number of c-axes: 2 | Number of b-axes: 1 | - positioning/indexing: 0.001 ° | Spindle revolutions...

1999 Colchester Tornado 110 CNC Lathe with Short Bar Feeder

• Manufacturer: Colchester
• Model: Tornado

Diameter over bed 420 mm, tip length 410 mm, including tools with trolley and 3 drawer contents with accessories, quantity and further details see photos

2011 DRYPOINT RA 100

• Manufacturer: DRYPOINT

Nominal volume flow: 630 m3/h | Max. inlet temperature: 70 °C | Machine's weight about: 94 kg | Length: 625 mm | Width: 555 mm | Height: 975 mm

2007 INDEX G250

• Manufacturer: Index
• Model: G250

MAIN SPINDLE TAILSTOCK TURNING-MILLING SPINDLE TOOL CHANGER POWER SUPPLY WEIGHT & DIMENSIONS MACHINE HOURS - Number of turning-milling spindle hours : 7.891 [h] * with paper filtering unit - Coolant through spind...

MRV 100 - Multi-Range Vacuum Gauge

Measuring device for use in the rough, fine and high vacuum ranges Can only be used with sensor Digital measuring device, USB interface and analog voltage output Clear membrane keypad Two relays for programming s...

2000 GILDEMEISTER GD 12

• Manufacturer: Gildemeister
• Model: GD 12

Used Machine tools for sale Max. bar diameter: 12,7 [mm] | X stroke: 85 [mm] | Y stroke: 150 [mm] | Z stroke: 160 [mm] | Spindle speeds: 12000 [rpm] | Number of axes: 5 | Cnc: Fanuc 18 i-T | Bar loader: IEMCA CH ...

2015 OKUMA MULTUS U 4000-2SW 2000 Ref No: 50716

• Manufacturer: Okuma
• Model: Multus U4000
• Spindle bore: 112 millimeter

-Big Bore left spindle: Spindle holder A11 (Din 55026) Chuck is a SMW KNCS-N 325-104 - Tool holder (top) Milling spindle (Capto C6)

2004 STAR SE-12B

• Manufacturer: Star
• Model: SE-12B

MAIN SPINDLE COUNTER-SPINDLE GUIDE BUSH HOLDER 1 SECONDARY OPERATION POWER SUPPLY - Parts catcher - Coolant tank * with high-pressure pump Used Machine tools for sale

2018 INDEX MS 16C

• Manufacturer: Index
• Model: MS16C

Number of cross slides: 12 | Number of spindles: 6 | Capacity round bar: 16 mm | From: 0 t/min | Up to: 10000 t/min | Voltage 50 hz 3x: 400 Volt | Total power required: 59 kVA | Machine's weight about: 5200 kg |...