Used controller system in Switzerland

2007 TORNOS Multi Alpha - 8x20

• Manufacturer: Tornos
• Model: Multialpha 8X20

Control: FANUC 30i-MODEL A | Number of axis total: 37 | Number of cross slides: 6 | Plain turning slide number: 8 | Number of spindles: 8 | Number back spindle: 2 | Number of tools max. back spindle: 10 | Capaci...

TURN AND MILL CENTER DMG MORI TYPE NTX 1000 -ZSM

• Manufacturer: DMG Mori
• Model: NTX 1000
• Spindle bore: 73 millimeter

Inventory no.2240013, machine including : Machine NTX 1000 / SZM_F31iB5 Fanuc F31iB5 control with Celos Clamping device Kitagawa BB206A521 + Kitagawa SR1453C21 Clamping device Kitagawa BB208A621 + Kitagawa SR1566...

CNC LATHE SCHAUBLIN TYPE 125-CCN R-T A2-4

• Manufacturer: Schaublin
• Model: 125CCN

Inventory 2230041 including : – A2-4 headstock – 1 set of equipment for using F38 collets on A2-4 ref 110-37.135 – 27 F-38 collets ref 76-0072 – 1 adjustable extractor stop for F38 collets ref 110-37.140 – 1 RHU ...

CNC LATHE “SCHAUBLIN” TYPE 125-CCN L-T A2-4

• Manufacturer: Schaublin
• Model: 125CCN

Inventory no.2220087, machine including : Equipment for use of B32 collets ref.110-37.110 Adjustable extractor B32 ref.110-39.140 1 rear radial tool holder 60 mm, with chisel holder 12×12 mm. Ref.110-46.090 1 fro...

CNC LATHE SCHAUBLIN 125-CCN R-TM A2-4

• Manufacturer: Schaublin
• Model: 125CCN

Inventory no. 2210081, machine consisting of : – 1 Pneumatic 3-jaw chuck 3 jaws Ø110 [mm] A2-4 – 38 Sets of soft jaws – 1 Pneumatic tailstock MT3 ref 0125-65250-000 – 1 Clamping device for B32 – A2-4 collets – 1 ...

CNC LATHE “SCHAUBLIN” TYPE 125-CCN R-TM A2-4

• Manufacturer: Schaublin
• Model: 125CCN

Manufacturing origin Swiss Voltage 380/50/3 Netweight 1570 kg Dimensions 1830x1260x1700 mm Capacities Max. turning diameter Ø 270 mm Max. swing over carriage Ø 115 mm Centre height over carriage 60 mm ...

(C-1000) 2005 Victor Vcenter-102A CNC milling center

• Manufacturer: Victor
• Model: Vcenter-102

Operating hours: 8610 Operating system: Fanuc 18i-MB Own weight: 6000kg T-slot table size LxW: 1100x510mm Taper size: BT40 Tool magazine capacity: 24 Equipped with: oil-mist separator, Habor cooler, fongex chip c...

NC milling machine

Dimensions LxWxH: 1550x1400x2000mm T-slot table size LxW: 1100x300mm Equipped with Trak MX2 NC system

Gildemeister CTX 320 Linear I CNC Lathe

• Manufacturer: Gildemeister
• Model: CTX 320 LINEAR

We hereby offer this used Gildemeister CTX 320 Linear CNC lathe form 2005, located in Switzerland. Engineered for unparalleled performance, this lathe boasts a turning length of 600 mm, providing ample space for ...

Star SV-32 I CNC Lathe

• Manufacturer: Star
• Model: SV-32

We hereby offer this used Star SV-32 CNC lathe from 2003, located in Switzerland. This high-performance machine is equipped with a Fanuc 16i control unit, renowned for its precision and user-friendly interface. T...

1993 Skinetta Pac-Systeme Kiener Skinetta ASK 300 Banding machine

• Manufacturer: Kiener - Skinetta

Automatic stretch-banding machine incl. linear blister feeder, blister grouping and counting device and banding unit. Control system: SIEMENS, type Simatic S7-300

2005 MAZAK NEXUS 510C

• Manufacturer: Mazak
• Model: Nexus

Control: MAZATROL 640M NEXUS | Number of axis total: 3 | Number of tables: 2 | Table length: 1300 mm | Table width: 550 mm | Number of t-channels: 5 | Distance of the t-slots: 100 mm | T-channel width: 18 mm | T...

2010 Pago / Fujiseal System 521/502 Folding boxes labeler

• Manufacturer: Fuji Seal

Mobile tamper-evident labeling system for folding boxes (only one-sided label application as well as another label application from below). System incl. top conveyor, side labeler type PM6/2 L75/100, bottom label...

CNC SHARPENING MACHINE SCHNEEBERGER TYPE GEMINI DMR

• Manufacturer: Schneeberger

Inventory nr. 2190105, machine including : Part setter Auto loading system Oil mist collector Manufacturing origin CH Voltage 3x400V/50Hz Netweight 8’000 kg Dimensions 1170x2270x2260 mm (standard) Control G...

Gannomat Protec I CNC Machining Center

• Manufacturer: Gannomat
• Model: PROTEC

We hereby offer this used Gannomat Protec CNC machining center from 2019, located in Switzerland. It features an expansive working area of 1000 x 5600 x 60 mm, providing ample space for large workpieces. The mach...