Used controller in Saxony, Germany

Temperature control unit GS-SCHWAB GS-300 #B15613

Temperature control unit used Manufacturer GS-System SCHWAB Year of manufacture 2015 The unit comes from an aluminum foundry and has been used only little (according to the counter and optical condition). All ite...

2018 STAR SR-38 type A

• Manufacturer: Star
• Model: SR-38

Further information: Front side SR-38 Type A Number of axes 5 Main spindle (spindle headstock) Z1 / C1 axis Linear slide X1 / X3 / Y1 axis B-axis on linear slide manually adjustable Max. machining diameter 38 mm ...

2001 TRAUB TNC 42/65

• Manufacturer: Traub
• Model: TNC42/65
• Spindle bore: 110 mm
• Power requirement: 31.2 kW

Chisel slide cross section turning and milling support: 16 x16 ( 20 x20 ) mm Further information: - Revolver 1 Number of branches 10 - Revolver 2 Number of branches 14 - Hecowpkfie Htlx Tfefh - Powered tools Yes

2004 SEIGER SLZ 850x4000

• Manufacturer: SEIGER
• Power requirement: 52 kW

Cycle lathe with Siemens cycle control Motor: 37kW, rated speed 1500 rpm; max. speed 6500 rpm; torque 235 Nm Two gear shift stages Stage II: Spindle torque 258.9 to 1364.6 Nm Stage I: Spindle torque 1050.4 - 5536...

2014 Unitech UT 660 x 1500

• Manufacturer: Unitech
• Spindle bore: 105 mm
• Power requirement: 23 kW

Chip conveyor includes cooling water tank with pump 3-speed manual gearbox with electronic gear shifting Tool holder according to/with Silent Tool Technology equipped (Capto C6) Manual control unit Foot switch Co...

1987 TRAUB TNS 60

• Manufacturer: Traub
• Model: TNS60
• Power requirement: 38 kW

Tool holder straight shank DIN 69880 (VDI 3425) Ø 40x63 Röhm lathe chuck Ø 200mm hydraulic clamping Operation via double foot switch and control panel/operating panel. Coolant device The Traub carries an integrat...

2011 DMG GILDEMEISTER CTX Alpha 300

• Manufacturer: Gildemeister
• Model: CTX ALPHA 300
• Spindle bore: 73 mm

CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm...

2004 Shenyang - Fermat CAK 61

• Manufacturer: Fermat
• Spindle bore: 70 mm
• Power requirement: 15 kW

other features: -hydr. chuck TONFAU Ø 300mm -hydraulics -Coolant system -control panel -double foot switch accessories: -div. mold jaws -div. soft jaws -6 footrests

2006 GILDEMEISTER NEF 520

• Manufacturer: Gildemeister
• Model: NEF 520
• Spindle bore: 65 mm
• Power requirement: 19.2 kW

Multifix steel holder size C 3-jaw chuck Ø 250mm chip tray manual hour counter live center in tailstock Operation control panel and monitor Accessories: 4-jaw chuck Ø 250mm with internal jaws various chuck keys M...

1997 MONFORTS KNC 8S

• Manufacturer: Monforts
• Model: KNC 8

Cycle lathe Machine overhauled in 2010 Operation via control panel Thread cutting by calculation Interpolator of NC control Chip conveyor manufacturer Cable drag Three-jaw chuck D=500mm without clamping jaws Vari...

1988 TRAUB TND 360

• Manufacturer: Traub
• Model: TND360
• Power requirement: 38 kW

Equipment: Lathe chuck Ø 200 mm, hydraulic Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system control panel Accessories Fine adjustment device for tool set-up

2008 GOODWAY GA 2800

• Manufacturer: Goodway
• Power requirement: 36 kW

Equipment: -3-jaw chuck Ø 260mm with interchangeable jaws inside/outside -center point in tailstock -disk turret Ø 480mm -Hydraulic unit (40 liter capacity) -Coolant tray (80kg) -LOSMA exhaust air filter -Chip tr...

1990 MANURHIN K`MX 20

• Manufacturer: MANURHIN
• Power requirement: 8 kW

techn. details: - bar clamping hydraulic -automatic workpiece discharge (via catch basket) - 2 turrets with each 6 tool tapers - coolant device - control NUM 760 (size: L:1,0xW0,8mxH:1,56m) Zubehör: - bar loader ...