Used controller in Piedmont, Italy

CONE DYEING OBEM

• Manufacturer: OBEM

Machine equipped with: N. 1 trolley to load and unload packages N. 5 + 5 dyeing spindles N. 2 reducing devices/lungs

HOMAG KAR 210 AMBITION 2274 Single Sided Edgebanders

• Manufacturer: Homag
• Model: Ambition

Type of edging: Thin edge, Thick edge | Gluing system: ✓ | Premilling unit: ✓ | Corner rounding unit: ✓ | Max feed speed: 82.02 ft/min | Operating units: 7 nr | Subfamily: Single Sided Edgebanders | Max. forward...

SCM DMC SY TC 1350 Wide Belt Top Sanders

• Manufacturer: SCM / SCMI

Max. machining width: 4 ft 5.15 inch | Min. machining thickness: 0.16 inch | Working table: adjustable | Vacuum feed belt: ✓ | No. operating units: 4 Nr | Sectioned swab: ✓ | Subfamily: Wide Belt Top Sanders | M...

Hydro Extractor Pozzi

• Manufacturer: Pozzi

Mouth diameter mm. 900 H basket mm. 600 Capacity: diameter mm. 1.250 | Control board: YES

CONE and FIBER DYEING NOSEDA

• Manufacturer: In.Te.Ma Sas

Complete with : - N. 2 bobbins carriers - capacity n. 114 bobbins - H. mm. 170 - N. 2 fibre carriers with nominal capacity Kg. 80 wool base - Diameter carrier cm. 98 - H. cm. 95 - Preparation tank of the same cap...

FREUTEK WDN0003 Automatic Edge bander

Hot glue tub for edges application on both linear and shaped panels - Main motor 3.95 kW - Accidental burn protection - Height adjustable edge guide - Rubber pre-tape roller - Double flat scrapers on both sides o...

UTITA TV 1200 CN - SERIAL NUMBER 91375

• Manufacturer: Utita

Maximum turning diameter: 1300 mm (WITH VERTICAL SADDLE) | Max turning diam: 1300 mm (WITH VERTICAL SADDLE) | Maximum load capacity: 6 tons (ON PLATEAU) | Spindle motor power: 37 kW (DC) | Cnc: to re-adapt | Max...

HANKS DYEING CABINET

• Manufacturer: Loris Bellini

9 sticks positions with head mm. 56 Hank perimeter cm. 150/160 N. 1 extractable basket for hanks with proper trolley.

CONE DYEING LORIS BELLINI

• Manufacturer: Loris Bellini
• Model: APRO 150

Pitch cm. 24 - N.24 spindles - H spindles cm. 90 Machine equipped with : -Expansion tank. -Introduction tank with mixer. -Double carrier and relative trolleys

SPRAY DYEING MEZZERA

• Manufacturer: Mezzera

8 Arms - Lenght arms mm. 800 Power pump kw. 3 Power arms motor Kw. 1

BARGSTEDT TLF 411/10/05 Horizontal Storage Systems

• Manufacturer: Bargstedt

Stock dimension length: 131 ft 2.80 inch | Stock dimension width: 34 ft 9.32 inch | Subfamily: Horizontal Storage Systems | Min. panel length: 6 ft 6.74 inch | Max. panel length: 13 ft 9.35 inch | Min. panel wid...

BIESSE TECHNO F Automatic Drilling Machine

• Manufacturer: Biesse
• Model: Techno

Max. panel width: 10 ft 5.98 inch | Max. panel length: 3 ft 3.37 inch | No of bottom units: 4 | Positioning of units by nc: ✓ | Lateral horizontal groups: ✓ | Subfamily: Automatic Drilling Machine | Bottom verti...

HOMAG PROFI TLF411/44/10 Horizontal Storage Systems

• Manufacturer: Homag

Stock dimension length: 141 ft 0.91 inch | Stock dimension width: 29 ft 6.33 inch | Subfamily: Horizontal Storage Systems | Min. panel length: 6 ft 6.74 inch | Max. panel length: 13 ft 5.42 inch | Min. panel wid...

HOLZMA HPL 430/43/22 Automatic Rear Loading Panel Saws

• Manufacturer: Holzma
• Model: HPL 4304322

Max. panel width: 14 ft 1.29 inch | Max. panel length: 7 ft 2.61 inch | Main saw blade projection: 4.33 inch | No of grippers: 7 | Subfamily: Automatic Rear Loading Panel Saws | Max. saw blade projection: 4.33 i...

COMAU VTL 13 PALLET CHANGER

• Manufacturer: Comau

Plateau diameter: 1090 mm | Number of pallets: 2 | Spindle motor power: 60 kw | Atc: 40 positions | Cnc: SIEMENS 8 | Nr of pallet: 2 | Year: 1989 | Maximum oscillation: 1450 mm | Number of gears: 2 | Cnc: SIEMEN...