Used controller in Norway

Trusted Seller
1998 Flow control Technologies 12" Ball Valve Model TE/SDT
- Manufacturer: FCT
Ball valve 12" x 10", class 2500 lbs ANSI, F51 Duplex Steel. Unused.
Ågotnes, Norway
Trusted Seller
2005 FMC / HCS Control Systems LTD / Enerpac Tong, Power, FMC - Union Nut
- Manufacturer: Enerpac
Hydraulic Tongs for FMC Riser and Landing String (SLS) furnished with Union Nut connection. Made by HCS for FMC The hydraulic tongs fit the castellation on Union Nuts and are used to make and break the riser conn...
Ågotnes, Norway
Trusted Seller
2005 Wormald / Siemens Firewater monitors, W/Control Cabinet and HPU Unit - Used
- Manufacturer: Siemens
Wormald X-Stream High Performance Nozzle Fire water monitors / Water Canons, System used on helideck offshore, Used in good condition. Fire monitors system comprises: 2 each Firewater Monitors 2 each Control Cabi...
Ågotnes, Norway
Trusted Seller
Auto-Maskin RK-66 Interface Module
- Manufacturer: Auto-Maskin
This interface block is a mandatory requirement for each DCU 305 controller, and is included when purchasing any DCU 305. This interface block is a mandatory requirement for each DCU 305 controller , and is inclu...
Tønsberg, Norway
Trusted Seller
Auto-Maskin MK-14 Relay Expansion Unit
- Manufacturer: Auto-Maskin
The MK-14 is a compact relay expansion unit, with 14 relays on-board. Each relay has a potential-free changeover contact. Use the configuration tool to configure the desired function to each relay. It can be any ...
Tønsberg, Norway
Trusted Seller
Auto-Maskin DCU 205
- Manufacturer: Auto-Maskin
The DCU 205 is an electronic unit for control and monitoring of marine diesel engines used as generator sets, main propulsion engines or pumping stations. The unit has functions such as manual start and stop, aut...
Tønsberg, Norway
Trusted Seller
Auto Maskin RP 220E
- Manufacturer: Auto Maskin
The RP 220E is a high resolution, sunlight capable remote touchscreen panel for twin-engine configurations with 200 or 400 series of Marine Pro engine controllers (DCUs). This responsive touch screen panel is ful...
Tønsberg, Norway
Trusted Seller
DCU 2217
- Manufacturer: Unknown
The DCU 2217 is an electronic unit for control and monitoring of diesel engines used as auxiliary or emergency gen sets. Developed in 1970 the unit is now discontinued, but spare parts can be obtained, mostly fro...
Tønsberg, Norway
Trusted Seller
RP 210 Remote Panel
- Manufacturer: Unknown
The RP 210 is a remote panel for the 200 Series and the 400 Series of DCU engine panels, and also for the DMU 206 CAN bus Reader. The panel connects to the DCU using a standard ethernet cable. When connected, the...
Tønsberg, Norway
Trusted Seller
RP 210E Remote Panel
- Manufacturer: Unknown
The RP 210E is a high resolution, sunlight capable remote touchscreen panel for the 200 and 400 series of Marine Pro engine controllers (DCU’s). This responsive touch screen panel is fully weather protected both ...
Tønsberg, Norway
Trusted Seller
Auto-Maskin RSP 305 Remote Panel
- Manufacturer: Auto-Maskin
RSP remote panel utilized for remote monitoring of multiple DCU 305 units. Where remote monitoring of multiple DCU 305 units are required, the RSP 305 should be utilized. The RSP 305 configures itself to the DCU ...
Tønsberg, Norway
Trusted Seller
Auto-Maskin AK-6 Analog Expansion Unit
- Manufacturer: Auto-Maskin
The AK-6 easily adds six more 4-20mA channels to the DCU 305 panels of type R2 and R3. Only one unit can be used per DCU 305 panel. The AK-6 easily adds six more 4-20mA channels to the DCU 305 panels of type DCU ...
Tønsberg, Norway
Trusted Seller
Auto-Maskin DCU 305 A R2
- Manufacturer: Auto-Maskin
DCU 305 R2 is the legacy workhorse engine panel. All variants, such as the types with a key-switch (the P-model) and also the types with a CAN bus interface are still available as aftermarket spare parts. Since i...
Tønsberg, Norway
Trusted Seller
1973 ZAMECH - LIAAEN E95/4-F280
- Manufacturer: Liaaen
ZAMECH - LIAAEN Type E95/4-F280 Gear type: Non Reversing Gearbox CPP - to be used with controllable pitch propeller
Tønsberg, Norway
Trusted Seller
2006 Mazak Integrex 400 IV
- Manufacturer: Mazak
- Model: INTEGREX 400 IV
This 5-axis Mazak Integrex 400 IV was manufactured in 2006. It features a Mazatrol Matrix control, a 12-inch chuck, and a steady rest supporting 70-230mm. The machine offers a milling spindle speed of 12000rpm an...
Norway