Used controller in New Zealand

Mincer

Hobart 4152SS Mincer, 3 ph, 7.5hp, on/off controls, has worm/knife/7mm perforated plate, 130mm throat. O’all dims approx. 1400mm x 750mm x 1130mm H.

Conveyor - Belt

Belt Conveyor, stainless steel frame, 3 ph, 0.12kw 88rpm drive, no controls, speed is approximately 1m per 1.77 seconds. Belt approx. 1050mm L x 480mm W.

Still

• Manufacturer: Still

Gin Column Still, new/never used, single phase, has two heating elements with temperature controller. 50L, approx. 500mm Ø x 2000mm H.

Conveyor - Belt

Belt Conveyor, 3 ph, motorised roller drum drive unit, no controls, stainless steel sides, no legs. Belt approx. 4100mm L x 400mm W.

Conveyor – 180 Degree

180 Degree Belt Conveyor, stainless steel frame, plastic link belt, drive unit, start/stop/on/off controls, elevated outfeed. Belt approx. 4000mm L x 260mm W.

Pump - Mono

Mono Pump, type SH 70 R5, 3 phase, on/off/start/stop controls, inlet/outlet approx. 45mm Ø. O’all dims approx. 1200mm x 460mm x 1120mm H.

Can Seamer

A10 Can Seamer, 3 ph and pneumatic, full controls, stainless steel frame, perspex guarding, on wheels. O'all dims 1870mm W x 1700mm D x 1910mm H.

Conveyor - Belt

Belt Conveyor, stainless steel frame, 3 ph, start/stop controls, on wheels, 3 x work stations with bin holes. Approx. 5300mm L x 395mm W x 1010mm H.

Air Compressor

JUBA Oil Free Air Compressor, 3 ph, on wheels, start/stop controls, 6kw, 1380rpm, 0.7MPa, 520L/min, 160L built in air receiver. Approx. 1350mm x 360mm x 850mm H.

2001 Gantry

Hitachi 5FH Gantry / Electric Chain Hoist, YOM 2001, 3 ph, 6 amps, 6m lift, rated load 5T, comes with motor drive trolley, control pendant, hook and chain.

Bin Lifter/Tipper

Bin Lifter/Tipper, 3 ph, 13amp CMC motor, up/down controls, food grade column style lifter, 77L bin volume (600mm W x 400mm D x 320mm H – low side), single column with bracing/support column to prevent movement d...

Pump - Lobe

Lobe Pump, stainless steel contact parts, 3 ph (16amp 4 pin plug), on/off controls, inlet/outlet approx. 50mm. O’all dims approx. 550mm W x 600mm D x 955mm H.

Tank Stirrer

Tank Stirrer with lid, designed to sit over tank, stainless steel, 3 ph, start/stop controls, lid Ø approx. 870mm, shaft Ø 36mm, shaft length 525mm, impellor Ø approx. 500mm.

Bread Slicer

Bread Slicer, 3 ph, on wheels, start/stop controls, 9mm blade gap, 320mm gap between guides at outfeed for max bread length. O’all dims approx. 1600mm x 500mm x 1650mm H.