Used controller in England, United Kingdom

Okuma Axial Driven Tool Holder for CNC Lathes

• Manufacturer: Okuma

Okuma Axial Driven Tool Holder for CNC Lathes, to Suit Okuma LT15M CNC Lathe, ER32 collets. Eppinger 9.655.088, s/n 180929-1 1:1, 5,000rpm, VDI 40

Doosan Axial Driven Tool Holder for CNC Lathes

• Manufacturer: Doosan

Used Doosan Axial Driven Tool Holder for CNC Lathes, to suit Doosan Puma 2000M or similar Doosan, ER25 collet, Eppinger Preci-flex,, s/n293992-12, ref no.R78684A, 1:1 ratio, max 6,000rpm. Bearing needs replacing ...

Mazak Static Turning Tool Holder for CNC Lathes

• Manufacturer: Mazak

Used Mazak Static Turning Tool Holder for CNC Lathes, to suit Mazak Smart 350, 35mm max square, s/n 5B088002700

Okuma Axial Driven Tool Holder for CNC Lathes

• Manufacturer: Okuma

Okuma Axial Driven Tool Holder for CNC Lathes, to Suit Okuma LT15M CNC Lathe, ER12 collets. Eppinger 9.608.088, s/n 192477-2 1:2, 8,000rpm. VDI 40

Eppinger Axial Driven Tool Holder for CNC Lathes

• Manufacturer: Eppinger

Used Eppinger Axial Driven Tool Holder for CNC Lathes, ER32, To suit Kia SKT250MS or Similar. Part no. 7.071.760, s/n 271917-10, ratio 1:1, 4,000rpm

Tom Chandley TC5, 5 tray (400mm x 600mm tray) bake off convection oven on low stand, turbo colour control panel

• Manufacturer: Bake Off Italiana

We also sell the UK Standard Bakery Trays 18" by 30". Please enquire as they vary with the different styles. All items are fully serviced and tested by a qualified engineer before leaving the factory unless state...

Doosan Axial Driven Tool Holder for CNC Lathes

• Manufacturer: Doosan

Used Doosan Axial Driven Tool Holder for CNC Lathes, to suit Doosan Puma 2000M or similar Doosan, ER25 collet, Eppinger Preci-flex,, s/n409939-R1, ref no. 7.071.940, 1:1 ratio, max 6,000rpm. Bearing needs replaci...

BMT55 Angular Driven Tool Holder for CNC Lathes

BMT55 Angular Driven Tool Holder for CNC Lathes, ER25 Collet holder, Length of drive to tang – 103mm. (To fit Doosan CNC lathes)

BMT55 Straight Driven tool Holder for CNC Lathes

BMT55 Straight Driven tool Holder for CNC Lathes, ER25, length of drive to end the tang – 108mm

BMT55 Angular Driven Tool Holder for CNC Lathes

• Manufacturer: Eppinger

BMT55 Angular Driven Tool Holder for CNC Lathes, Eppinger preci-flex, Length of drive to the end of the tang – 103mm

BMT55 Angular Driven Tool Holder for CNC Lathes

• Manufacturer: Eppinger

BMT55 Angular Driven Tool Holder for CNC Lathes, BMT55, Eppinger preci-flex, Length of drive to the end of the tang – 103mm

BMT55 Angular Driven Tool Holder for CNC Lathes

BMT55 Angular Driven Tool Holder for CNC Lathes, BMT55, ER25 collet holder, Length of drive to the end of the tang – 103mm

BMT55 Angular Driven Tool Holder for CNC Lathes

BMT55 Angular Driven Tool Holder for CNC Lathes, tapping head, Length of drive to the end of the tang – 108mm, (To suit Nakamura lathe)

BMT55 Straight Driven tool Holder for CNC Lathes

BMT55 Straight Driven tool Holder for CNC Lathes, ER20, length of drive to end the tang – 108mm