Used controller in Illinois, USA

2022 Leading Edge Industrial HX710 Desktop CNC Turning Center ()

Imperial Metric

18" chuck Hitachi Seiki HT-40G CNC Turning Center

• Manufacturer: Hitachi Seiki
• Model: HT40G

Under Power For Inspection

1990 Mori Seiki SL-4T

• Manufacturer: Mori Seiki
• Model: SL-4

Turning CNC H.D. 3 HP / 60 Cycle / 220 Volts 12 Station Turret (8 + 4) Equipped With: 8″ Chuck Fanuc 6T Control Live Tooling RS232 Interface 2 Speed Gearbox Chip Conveyor 12 Station Turret 8″ Chuck Manuals 6 Bori...

6" chuck Okuma LB-10M Live Tool CNC Turning Center

• Manufacturer: Okuma
• Model: LB10
• Spindle bore: 44.449999999999996 millimeter

Imperial Metric Okuma Model LB-10M Live Tool CNC Turning Center No. of rotating stations 6 stations X-axis travel 5.9" Equipped With OSP 5000L-G CNC Control Chip Conveyor Live Tooling

2007 EMCO MAXXTURN 45

• Manufacturer: Emco
• Model: MAXXTURN 45

2007 Emco Maxxturn 45 with Sub-Spindle and Iemca barfeed. Machine is in very good condition and can be inspected under power as needed. Machine comes with a sub-spindle, parts catcher, Iemca barfeed, and Fanuc 18...

2001 Nakamura Tome WT-250

• Manufacturer: Nakamura tome
• Model: WT-250

Cutting time – 4,926 hours Swing Over Bed 9.84” Swing Over Carriage 9.84” Max Turing Diameter 9.84” St. Turning Diameter 3.94” Max Turning Length 17.13” Max Bar Size 2.01” Spindle Motor 20 HP Spindle Speed 4500 R...

2006 Hankook 9NC

• Manufacturer: Hankook
• Model: 9NC

Max Swing Over Bed 37.4″ Max Swing Over Cross Slide 24.8″ Distance Between Centers 157.48″ Maximum turning length 151″ Spindle bore 9.875″ Min/Max Rpm 3 – 630 RPM Fanuc 21i-TB Control Front/Rear 24″ Manual Chucks...

2024 GANESH GTW-1840 CNC

• Manufacturer: Ganesh
• Model: GTW-1840 CNC

Machine is brand new. For additional options and pricing please see documents link above and click the PDF. 4-Way Programmable Toolpost MT#5 Tail Stock Coolant System Fluorescent Work Light Machine Condition Disp...

1997 Used OKUMA LU15M CNC LATHE | Lathes CNC

• Manufacturer: Okuma
• Model: LU15

Imperial Metric Okuma Model LU-15M Twin Turret Live Milling CNC Lathe SWING OVER BED 20.87" SWING OVER CARRIAGE 14.96" SWING OVER CROSS SLIDE 12.99" MAXIMUM TURNING DIAMETER 10.62" MAXIMUM TURNING LENGTH 23.62" T...

2006 Kingston CL-38

• Manufacturer: Kingston

FANUC oi-TC Control 24″ 4-Jaw Chuck Air Chuck 2000 rpm 2 Speed A2-11 Spindle 7.3″ Spindle Bore 26″ Swing Over Bed 14.6″ Swing Over Cross Slide 78″ Distance Between Centers 18.1″ Bed Width 21.26″ X-Axis Travels 76...

2018 TAKAMAZ XL-100

• Manufacturer: Takamaz
• Model: XL-100

Machine is in great running condition. Includes parts stocking and unloading systems. Fanuc 0i-TD Control Collet System Part Probe 8 Station Turret Full Compliment of Tool Holders Fully Automatic Loading and Unlo...

2020 Miyano GN3200W-2F3

• Manufacturer: Miyano

Miyano Gn3200w 2f3 Cnc Swiss Type Lathe Specifications (Subject to Buyer Verification): Machining Capacity and Chuck System Power Chuck Pneumatic 3″(4″) Precision Chuck Diaphragm Chuck Pneumatic 4″ Maximum Diamet...

2007 Okuma Captain L470M Live Tool CNC Lathe (2006)

• Manufacturer: Okuma
• Model: Captain L470

Imperial Metric Okuma Model Captain L-470M Live Tool CNC Lathe (2006) Swing Over Bed 24.4" Swing Over Cross Slide 18.89" Max Cutting Diameter 16.53" Max Cutting Length 49.21" X-Axis Travel 11.81" Z-Axis Travel 50...

2022 SPINNER TTS-65 TRIPLEX

• Manufacturer: Spinner
• Model: TTS-65 TRIPLEX

2022 SPINNER TTS-65 TRIPLEX CNC Lathe, used with 8.3" chuck, 2.56" bar capacity, live tooling, Y-axis milling, sub-spindle, 3 turrets, 32.2 hp, and 7,000 RPM max. Includes bar feeder, rota rack, collet chucks, to...

HARDINGE CHNC-III

• Manufacturer: Hardinge
• Model: CHNC III

Used Hardinge CHNC-III CNC Lathe. 14" Swing, 1.625" Bar Cap, 10 hp, max 5000 RPM. Machine still runs, however, the spindle was running at 50% power last time they ran this machine. Parts machine, make an offer.