Used controller in Denmark

Control Handle for Propulsion

Air operated handle Storage location: 36 B3

Wandfluh Hydraulik Solenoid Coil Explosion Proof MKY45/18x60-G12/L15

• Manufacturer: Wandfluh

Storage location: 22 D3 | Part nr.: 139114887

Wärtsilä- Wartsila PROPULSION CONTROL

• Manufacturer: Wärtsilä

Storage location: EL13 A1

Wynn Wiper Control

• Manufacturer: Wynn Instruments

Storage location: El 3 B 6

Wärtsilä- Wartsila PROPULSION CONTROL

• Manufacturer: Wärtsilä

Storage location: EL12 B1

Wynn Wiper Control

• Manufacturer: Wynstrum

Storage location: El 3 B 6

Decca wiper control

• Manufacturer: Decca

Storage location: EL3 B6

Gildemeister DMG CTV 250 Linear

• Manufacturer: Gildemeister
• Model: CTV 250

Årgang: 2001 | Controlled in: 3 axis | Working hours spindle: 16167 Hours | Hydraulic main centre chuck: 250 mm dia. | X axis stroke: 800 mm | Z axis stroke: 300 mm | Spindle bore: 79 mm dia. | Main motor power...

WASINO LJ 10 MC

• Manufacturer: Amada - Wasino

Årgang: 1990 | Max. turning dia o/slide: 430 mm dia. | Max. turning diameter: 220 mm dia. | Turning length: 1000 mm | Boring trough drawing pipe: 65 mm dia. | Mainspindle: A2 No. 88 | Spindle bore: 77 mm dia. | ...

Mori Seiki ZT 1000Y

• Manufacturer: Mori Seiki
• Model: ZT-1000Y

Årgang: 2003 | Max. turning dia o/slide: 250 mm dia. | Max. turning diameter: 190 mm dia. | Main spindle speed range: 6000 rpm | Sub spindle speeds: 6000 pr/min | C axis: 0,001 | Y axis: 40+/- mm | Turret 1 with...

2019 DMG MORI NLX 2500 SY / 700

• Manufacturer: DMG Mori
• Model: NLX 2500

This 4-axis DMG MORI NLX 2500 SY / 700 was manufactured in 2019, featuring a Sauter turret capable of 10,000 rpm, dual spindle tailstock, high-pressure coolant system, and full-closed loop control for the X-axis....

HOFMANN RW-NC 220

• Manufacturer: Hoffmann

Disclaimer Årgang: 2009 | Table size: 220 mm | Dividing: 0.001 Degree | Control: SIemens 840D | Center height: 220 mm | Vægt: 200 kg | Længde: 600 mm | Bredde: 400 mm | Højde: 800 mm

EMCO HYPERTURN 665

• Manufacturer: Emco
• Model: Hyperturn

Årgang: 2003 | Bar feeder: KAMA 4265 mm | Max. turning diameter: 430 mm dia. | Max. turning dia o/slide: 600 mm dia. | Turning length: 644 mm | Dist. between spindels: 975 mm | Main motor power: 21/29 kw | Main...

2003 Okuma MacTurn 350

• Manufacturer: Okuma
• Model: Macturn 350

This 5-axis Okuma MacTurn 350 was manufactured in 2003. It features an HSK 63 tooling system and can accommodate up to 40 tools. The machine includes an autodoor and supports a turning length of 1500 mm. Consider...

EMCO HYPERTURN 665 MC PLUS

• Manufacturer: Emco
• Model: Hyperturn

Årgang: 2002 | Max. turning diameter: 430 mm dia. | Max. turning dia o/slide: 600 mm dia. | Dist. between spindels: 975 mm | Turning length: 744 mm | Boring trough drawing pipe: 65 mm dia. | Y axis: 100 +/- 50 m...