Used controller in Bern, Switzerland

2004 SCHAUBLIN 60 CNC

• Manufacturer: Schaublin
• Model: 60CNC

With cnc continuous path control: SIEMENS | With nc dividing head. model: 810D Shopmill | With nc dividing head. for axes: 4 | X axis longitudinal travel: 600 mm | Y axis cross travel: 510 mm | Z axis vertikal t...

VOUMARD 3 CNC

• Manufacturer: Voumard

Control: NUM | Min. grinding diameter: 3 mm | Max. grinding diameter: 50 mm | Centre height: 200 mm | Longitudinal travel (z-axis): 300 mm | Cross travel (x-axis): 90 mm | Swivelling range: -5 / 60 ° | From: 550...

2004 STAR SE-12B

• Manufacturer: Star
• Model: SE-12B

MAIN SPINDLE COUNTER-SPINDLE GUIDE BUSH HOLDER 1 SECONDARY OPERATION POWER SUPPLY - Parts catcher - Coolant tank * with high-pressure pump Used Machine tools for sale

2007 INDEX G250

• Manufacturer: Index
• Model: G250

MAIN SPINDLE TAILSTOCK TURNING-MILLING SPINDLE TOOL CHANGER POWER SUPPLY WEIGHT & DIMENSIONS MACHINE HOURS - Number of turning-milling spindle hours : 7.891 [h] * with paper filtering unit - Coolant through spind...

MRV 100 - Multi-Range Vacuum Gauge

Measuring device for use in the rough, fine and high vacuum ranges Can only be used with sensor Digital measuring device, USB interface and analog voltage output Clear membrane keypad Two relays for programming s...

2001 TORNOS MULTIDECO 20/8

• Manufacturer: Tornos
• Model: Multideco 20/8

- maxi part length (without counter operation) : 100 [mm] - maxi part length (with counter operation) : 80 [mm] - TORNOS PNC DECO control - HIRTH teeth drum locking - high pressure pump - chips conveyor - turning...

2005 TORNOS MULTIDECO 20/6b

• Manufacturer: Tornos
• Model: Multideco 20

- Barrel locking with Hirth teeth MACHINE HOURS - TORNOS TB DECO CNC - Spindle stop - Counterspindle with counter-operation device - Single end milling machine - Polygon milling machine - Central block drilling m...

2000 GILDEMEISTER GD 12

• Manufacturer: Gildemeister
• Model: GD 12

Used Machine tools for sale Max. bar diameter: 12,7 [mm] | X stroke: 85 [mm] | Y stroke: 150 [mm] | Z stroke: 160 [mm] | Spindle speeds: 12000 [rpm] | Number of axes: 5 | Cnc: Fanuc 18 i-T | Bar loader: IEMCA CH ...

2001 SCHAUBLIN 125 CCN-R

• Manufacturer: Schaublin
• Model: 125CCN

Control manufacture: FANUC | Control manufacture model: 18i | Turning diameter: 270 mm | Center height: 125 mm | Distance between centres: 600 mm | Turning length: 400 mm | Turning diameter over cross slide: 11...

2015 OKUMA MULTUS U 4000-2SW 2000 Ref No: 50716

• Manufacturer: Okuma
• Model: Multus U4000
• Spindle bore: 112 millimeter

-Big Bore left spindle: Spindle holder A11 (Din 55026) Chuck is a SMW KNCS-N 325-104 - Tool holder (top) Milling spindle (Capto C6)

1996 WIRTH & GRUFFAT CENTROFLEX

• Manufacturer: Wirth & Gruffat
• Model: CENTROFLEX

MAIN SPINDLE WEIGHT & DIMENSIONS - Coolant tank Used Machine tools for sale

2018 INDEX MS 16C

• Manufacturer: Index
• Model: MS16C

Number of cross slides: 12 | Number of spindles: 6 | Capacity round bar: 16 mm | From: 0 t/min | Up to: 10000 t/min | Voltage 50 hz 3x: 400 Volt | Total power required: 59 kVA | Machine's weight about: 5200 kg |...

2017 TORNOS MULTISWISS 6x14

• Manufacturer: Tornos
• Model: Multiswiss 6X14

Number of axis total: 20 | Number of cross slides: 6 | Number of spindles: 6 | Number back spindle: 1 | Number of tools max.: 18 | Number of tools max. back spindle: 2 | Capacity round bar: 4 - 14 mm | Workpiece...

2001 INDEX MS42C

• Manufacturer: Index
• Model: MS42C

Used Machine tools for sale

1999 INDEX MS42C

• Manufacturer: Index
• Model: MS42C

Used Machine tools for sale