Used controller in Riga, Latvia

Electronic rate controller for seed drill "Vaderstad"

• Manufacturer: Väderstad

Tidy. In operation. Not used in Lithuania. Not used in Lithuania. Parts are discounted by 30 - 50 percent. If you are interested, call +370 682 51607.

Nord helical bevel

• Manufacturer: Nord

Nord helical bevel 90,92-SERIES has developed a unique class of high performance right-angle speed reducers. Features: Energy efficient right angle solution High quality and wear free helical and bevel gearing Ro...

T-70 transmitters

• Manufacturer: ROSTA Engineering

TECHNICAL DATA: High-sensitivity two-step push buttons Multiband Radio (400 - 930 MHz) with Full-Duplex communication External SIM –module (EP70) for easier reserve transmitter programming Rechargeable NiMH batt...

IK transmitters

• Manufacturer: ROSTA Engineering

TECHNICAL DATA: High-sensitivity two-step push button. Multiband Radio (400 - 930 MHz) with Full-Duplex communication. Highly customizable. LCD display 2x12 Char . External removable EEPROM SIM module. Easy and ...

CHC Navigation TG63

"CHC Navigation TG63" is an operator-friendly 2D/3D grader automatic control system. The system is designed to: facilitate the operator's work, reduce fatigue, labor costs and at the same time ensure maximum accu...

CHC Navigation TD63 PRO

"CHC Navigation TD63 PRO" is an operator-friendly 2D/3D bulldozer automatic control system. The system is designed to: facilitate the operator's work, reduce fatigue, labor costs and at the same time ensure maxim...

CHC Navigation TX63

CHC Navigation TX63 is an operator-friendly 2D/3D indication control system for excavators. The system is designed to: facilitate the excavator's work, reduce fatigue, labor costs and at the same time ensure maxi...

CHC Navigation EasyNAV

Possibility to design: trench, plane, slope with an excavator system or with a GNSS receiver. The price includes installation and calibration work. A 2-year warranty is provided. Prices may vary slightly due to c...

CHC Navigation TX73

If the system does not have a planning bucket, 4 sensors out of 5 possible are installed. A .dxf file is readable only if it contains a "3D Face" element. If it does not contain a "3D Face" element, the file must...

JFC Evolution S2

JFC Evolution S2 is designed for automatic, controlled calf feeding. The device mixes powder with heated water (from +5°C to +30°C) according to a set rate, and each animal receives exactly the amount of feed ass...

JFC Evolution S4

JFC Evolution is designed for automatic, controlled calf feeding. The device mixes the powder with heated water (from +5°C to +30°C) according to a set rate, and each animal receives the exact amount of feed assi...

2018 John Deere 1170G

• Manufacturer: John Deere
• Model: 1170G

Engine hours: 9900 hours | The head: H413 | Motors: John Deere PowerTech™ Plus 6068, EPA Final Tier 4/EU Stage V, 136 kW (182 hp) | Boom length: 11m | Faucet: CH611 IBC | The front axle of the tire: 710x24.5 | T...

2020 John Deere 1170G

• Manufacturer: John Deere
• Model: 1170G

Engine hours: 8750 h | The head: H413 | Motors: John Deere PowerTech™ Plus 6068, EPA Final Tier 4/EU Stage V, 136 kW (182 hp) | Boom length: 11.3m | Faucet: CH611 (11,3m) | The front axle of the tire: 710x24.5 |...