Used control unit in Flanders, Belgium

Trusted Seller
Fanuc Fanuc control unit MG63 CNC
- Manufacturer: Fanuc
Fanuc Fanuc control unit MG63 CNC
Deinze, Belgium
Auction
Set of hydraulic control units with hoses Nederman
- Manufacturer: Nedermann
Machine is working. Lot_number: 162
Berlaar, Belgium
Visit Auction Website
Trusted Seller
Fanuc Velocity Control Unit A06B-6047-H040
- Manufacturer: Fanuc
- Model: A06B-6047-H040
Fanuc Velocity Control Unit A06B-6047-H040
Deinze, Belgium
Trusted Seller
Fanuc Velocity control unit A06B-6047-H040
- Manufacturer: Fanuc
- Model: A06B-6047-H040
Fanuc Velocity control unit A06B-6047-H040
Deinze, Belgium
Trusted Seller
Fanuc Velocity Control Unit A06B-6047-H001
- Manufacturer: Fanuc
- Model: A06B-6047-H001
Fanuc Velocity Control Unit A06B-6047-H001
Deinze, Belgium
Maklaus control cabinet for punching unit
- Manufacturer: Maklaus
Aalst, Belgium
Trusted Seller
1991 BIESSE ROVER 325 Machining center CNC
- Manufacturer: Biesse
- Model: Rover
Working field: axis x: 3200 mm, axis y: 944 mm, axis z: 110mm Max programmable speed: axis x: 100 m/min; axis y: 75 m/min; axis z: 15 m/min Drill holder: diameter 10 mm Spindle speeds: 4000 rpm Grooving saw: diam...
Kortrijk, Belgium
Trusted Seller
1995 BIESSE ROVER 18 Machining center CNC
- Manufacturer: Biesse
- Model: Rover
Working field: axis x: 2310 mm, axis y: 628 mm, axis z: 90mm Max programmable speed: axis x: 100 m/min; axis y: 75 m/min; axis z: 15 m/min Drill chuck: diameter 10 mm Spindle speeds: 4000 rpm Grooving saw: diamet...
Kortrijk, Belgium
Trusted Seller
Eisenmann manual powdercoat unit
- Manufacturer: Eisenmann
Manual controlled powdercoat station: - movable on rails - with own recuperation- filter installation Entry dimensions of tunnel: 1000 width x 1800 height
Deinze, Belgium
Trusted Seller
Eisenmann Auto Powdercoat unit
- Manufacturer: Eisenmann
Auto controlled powdercoat station: - movable on rails - with own recuperation- filter installation - with 2 robots - each robot has 3 pistols Entry dimensions of tunnel: 1000 width x 1800 height
Deinze, Belgium
Trusted Seller
2018 SCM ACCORD 40 FX Machining center CNC
- Manufacturer: SCM / SCMI
- Model: Accord
Working area: X 5020 x Y 1680 mm 8 FX-matic automatic workpiece consoles Additional base module for FX-Matic beam Pre-equipment for pneumatic clamping H110 stops at the front of each beam H110 stops in the middle...
Kortrijk, Belgium
Trusted Seller
2016 SCM TECH Z5 Machining center CNC
- Manufacturer: SCM / SCMI
- Model: Tech Z5
Working area: X 5200 x Y 1260 mm Heading of main spindle: X 5709 mm, Y 1650 mm 8 workpiece consoles Equipment: Drilling unit with 18 spindles, 12 vertical spîndles, 6 horizontal spindles (4 in direction 'X', 2 in...
Kortrijk, Belgium
DIECK ELEKTRONIK PUNCHING UNIT
- Manufacturer: Dieck Elektronik
PUNCHING UNIT 1100 mm Electromagnetic punching unit Electrical control cabinet 3x 400V, 50Hz, 10 A Equipped with 4 punching stations of 5 or 6 mm. (resharpable dies) Possibility to extend to 5 or 6 punching stati...
Aalst, Belgium
1989 Dieck Elektronik perforating unit
- Manufacturer: Dieck Elektronik
Electro magnetic punching unit Electrical control cabinet 380 V, 50Hz Encoder wheel 40 electrical outputs on electrical cabinet Equipped with 36 tools of 6 mm. (resharpable dies) Can be placed on any machine (bag...
Aalst, Belgium
C.M.P. punching unit
Electromagnetic punching unit Electrical control cabinet 220 V, 50Hz Encoder wheel Equipped with 5 tools of 8 mm. (resharpable dies) Extra electrical outputs on electrical cabinet No scrap suction pump included T...
Aalst, Belgium