Building Filters

EMCO 3810/2
- Manufacturer: Emco
- Model: 38102
Line Impedance Stabilization Network, 9 kHz to 30 MHz, 2 x 10 A Earth Line Choke Artificial Hand Network Test Type - FCC-15, VDE 0871, VDE 0876, EN55022
$2,410 USDFarmingdale, NJ
Transmille 1000A
- Manufacturer: Transmille
Warm Up Time Double the time since last used up to 20 minutes maximum Standard Interfaces USB Temperature Performance Relative Humidity EMC & Safety The calibrator line input plug must be earthed (See D.O.C for f...
$12,495 USDFarmingdale, NJ
Megger MIT410-EN
- Manufacturer: Megger
50/100/250/500/1000V Insulation & Continuity Tester, 100 Gigaohms Resistance
$597 USDFarmingdale, NJ
Cooper Industries S280-76-1
- Manufacturer: Cooper Industries
Type MET Recloser Control Tester SPECIFICATIONS Input 115 Vac, 50/60 Hz, single phase (fused for two amp) with 15-ft power cord and a three wire grounding plug. 240 Vac 50/60 Hz, single phase (fused for one amp) ...
$5,245 USDFarmingdale, NJ
$1,575 USDFarmingdale, NJ
Keytek ECAT-E502A
- Manufacturer: Keytek
E502A - Plug-in module to produce the telecommunications surge wave required by IEC 61000-4-5, FCC Part 68 and ITU Rec K.17, K.20, and K.21 (formerly CCITT)
$8,395 USDFarmingdale, NJ
CDS 73A-455
- Manufacturer: CDS
Dual Ch.1553 Tester Module Cal: Calibration Available | As-is: Unit Sold AS-IS
$2,095 USDFarmingdale, NJ
Keytek CM-IOCD
- Manufacturer: Keytek
Waveforms Designed to couple combination waves of 1.2/50µs open-circuit voltage, 8/20µs short-circuit current Repetition Rate Up to 5 per minute at 4.4kV Data Line Frequency Greater than 100kHz without significan...
$1,397 USDFarmingdale, NJ- Trusted Seller

Mixer Continuous horizontal conical continuous mixer with integrated nozzles - IPP# 217875
15 ton/hr stainless steel horizontal conical continious mixer with integrated nozzles for adding up to 3 components into the powder, for mixing and agglomeration spocket wheel / chain (2) trunions, additional sma...
Princeton Junction, NJ - Trusted Seller

RAUTOMEAD RS 4000 ROD CONTINUOUS CASTER (14518)
- Manufacturer: RAUTOMEAD
RAUTOMEAD RS 4000 Rod Continuous Caster, Capacity 6,000 Tons copper per year (14518) RAUTOMEAD CONTINUOUS CASTER STOCK # 14518 The manufacturing year is 2002. Maximum casting speed 4,6 m/min, diameter 8mm (100kg ...
North Branford, CT - Trusted Seller

Mixer-Continuous - IPP# 208251
weld flat top weld coned bottom approx 200mm diameter central screw, 148-1400 rpm 150mm bottom outlet
Princeton Junction, NJ - Trusted Seller

Munson Continuous Mixer
Model: CM-16×4-SS Date Made New: August 2017 Condition: New on pallet, never used in production operation, can provide original manual All equipment is sold in “as is” condition. Locate It Direct Inc. is not l...
Piscataway, NJ - Trusted Seller

1250mm Mitsubishi / Hitachi 24 tons/hr Continuous Galvanizing
- Manufacturer: Hitachi
Additional Information: (Material & Line Specification) Strip thickness: 0.2~1.2mm Strip width: 650~1250mm Throughput Speed: in case of 1mm thickness: 100m/min in case of 0.5mm thickness: 150m/min (YIELD POINT OF...
Rockville Centre, NY - Trusted Seller

GTI Continuous Churn Machines
- Manufacturer: GTI
Our Continuous Churn Machines will forever change the way you make frozen desserts. Allowing for simple production of high-quality gelato, ice cream, sorbet, acai, yogurt right before your customer’s eyes. The p...
Ronkonkoma, NY
Rockville Centre, NY
Ultramatic Inline Flo-Thru Continuous Systems Mass Finishing Machine
- Manufacturer: Ultramatic
- Model: Inline Flo-Thru Continuous Systems
Good condition Ultramatic Inline Flo-Thru Continuous Systems Mass Finishing Machines available between 2024 and 2025 years. Located in USA and other countries. Click request price for more information.
USA
